Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 712 insertions, 0 deletions

diff --git a/drivers/net/wireless/ti/wlcore/cmd.h b/drivers/net/wireless/ti/wlcore/cmd.h
new file mode 100644
index 000000000..f2609d5b6
--- /dev/null
+++ b/drivers/net/wireless/ti/wlcore/cmd.h
@@ -0,0 +1,712 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * This file is part of wl1271
+ *
+ * Copyright (C) 1998-2009 Texas Instruments. All rights reserved.
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * Contact: Luciano Coelho <luciano.coelho@nokia.com>
+ */
+
+#ifndef __CMD_H__
+#define __CMD_H__
+
+#include "wlcore.h"
+
+struct acx_header;
+
+int wl1271_cmd_send(struct wl1271 *wl, u16 id, void *buf, size_t len,
+		    size_t res_len);
+int wl12xx_cmd_role_enable(struct wl1271 *wl, u8 *addr, u8 role_type,
+			   u8 *role_id);
+int wl12xx_cmd_role_disable(struct wl1271 *wl, u8 *role_id);
+int wl12xx_cmd_role_start_sta(struct wl1271 *wl, struct wl12xx_vif *wlvif);
+int wl12xx_cmd_role_stop_sta(struct wl1271 *wl, struct wl12xx_vif *wlvif);
+int wl12xx_cmd_role_start_ap(struct wl1271 *wl, struct wl12xx_vif *wlvif);
+int wl12xx_cmd_role_stop_ap(struct wl1271 *wl, struct wl12xx_vif *wlvif);
+int wl12xx_cmd_role_start_ibss(struct wl1271 *wl, struct wl12xx_vif *wlvif);
+int wl12xx_start_dev(struct wl1271 *wl, struct wl12xx_vif *wlvif,
+		     enum nl80211_band band, int channel);
+int wl12xx_stop_dev(struct wl1271 *wl, struct wl12xx_vif *wlvif);
+int wl1271_cmd_test(struct wl1271 *wl, void *buf, size_t buf_len, u8 answer);
+int wl1271_cmd_interrogate(struct wl1271 *wl, u16 id, void *buf,
+			   size_t cmd_len, size_t res_len);
+int wl1271_cmd_configure(struct wl1271 *wl, u16 id, void *buf, size_t len);
+int wlcore_cmd_configure_failsafe(struct wl1271 *wl, u16 id, void *buf,
+				  size_t len, unsigned long valid_rets);
+int wl1271_cmd_data_path(struct wl1271 *wl, bool enable);
+int wl1271_cmd_ps_mode(struct wl1271 *wl, struct wl12xx_vif *wlvif,
+		       u8 ps_mode, u16 auto_ps_timeout);
+int wl1271_cmd_read_memory(struct wl1271 *wl, u32 addr, void *answer,
+			   size_t len);
+int wl1271_cmd_template_set(struct wl1271 *wl, u8 role_id,
+			    u16 template_id, void *buf, size_t buf_len,
+			    int index, u32 rates);
+int wl12xx_cmd_build_null_data(struct wl1271 *wl, struct wl12xx_vif *wlvif);
+int wl1271_cmd_build_ps_poll(struct wl1271 *wl, struct wl12xx_vif *wlvif,
+			     u16 aid);
+int wl12xx_cmd_build_probe_req(struct wl1271 *wl, struct wl12xx_vif *wlvif,
+			       u8 role_id, u8 band,
+			       const u8 *ssid, size_t ssid_len,
+			       const u8 *ie, size_t ie_len, const u8 *common_ie,
+			       size_t common_ie_len, bool sched_scan);
+struct sk_buff *wl1271_cmd_build_ap_probe_req(struct wl1271 *wl,
+					      struct wl12xx_vif *wlvif,
+					      struct sk_buff *skb);
+int wl1271_cmd_build_arp_rsp(struct wl1271 *wl, struct wl12xx_vif *wlvif);
+int wl1271_build_qos_null_data(struct wl1271 *wl, struct ieee80211_vif *vif);
+int wl12xx_cmd_build_klv_null_data(struct wl1271 *wl,
+				   struct wl12xx_vif *wlvif);
+int wl12xx_cmd_set_default_wep_key(struct wl1271 *wl, u8 id, u8 hlid);
+int wl1271_cmd_set_sta_key(struct wl1271 *wl, struct wl12xx_vif *wlvif,
+			   u16 action, u8 id, u8 key_type,
+			   u8 key_size, const u8 *key, const u8 *addr,
+			   u32 tx_seq_32, u16 tx_seq_16);
+int wl1271_cmd_set_ap_key(struct wl1271 *wl, struct wl12xx_vif *wlvif,
+			  u16 action, u8 id, u8 key_type,
+			  u8 key_size, const u8 *key, u8 hlid, u32 tx_seq_32,
+			  u16 tx_seq_16, bool is_pairwise);
+int wl12xx_cmd_set_peer_state(struct wl1271 *wl, struct wl12xx_vif *wlvif,
+			      u8 hlid);
+int wl12xx_roc(struct wl1271 *wl, struct wl12xx_vif *wlvif, u8 role_id,
+	       enum nl80211_band band, u8 channel);
+int wl12xx_croc(struct wl1271 *wl, u8 role_id);
+int wl12xx_cmd_add_peer(struct wl1271 *wl, struct wl12xx_vif *wlvif,
+			struct ieee80211_sta *sta, u8 hlid);
+int wl12xx_cmd_remove_peer(struct wl1271 *wl, struct wl12xx_vif *wlvif,
+			   u8 hlid);
+void wlcore_set_pending_regdomain_ch(struct wl1271 *wl, u16 channel,
+				     enum nl80211_band band);
+int wlcore_cmd_regdomain_config_locked(struct wl1271 *wl);
+int wlcore_cmd_generic_cfg(struct wl1271 *wl, struct wl12xx_vif *wlvif,
+			   u8 feature, u8 enable, u8 value);
+int wl12xx_cmd_config_fwlog(struct wl1271 *wl);
+int wl12xx_cmd_start_fwlog(struct wl1271 *wl);
+int wl12xx_cmd_stop_fwlog(struct wl1271 *wl);
+int wl12xx_cmd_channel_switch(struct wl1271 *wl,
+			      struct wl12xx_vif *wlvif,
+			      struct ieee80211_channel_switch *ch_switch);
+int wl12xx_cmd_stop_channel_switch(struct wl1271 *wl,
+				   struct wl12xx_vif *wlvif);
+int wl12xx_allocate_link(struct wl1271 *wl, struct wl12xx_vif *wlvif,
+			 u8 *hlid);
+void wl12xx_free_link(struct wl1271 *wl, struct wl12xx_vif *wlvif, u8 *hlid);
+int wlcore_cmd_wait_for_event_or_timeout(struct wl1271 *wl,
+					 u32 mask, bool *timeout);
+u8 wlcore_get_native_channel_type(u8 nl_channel_type);
+
+enum wl1271_commands {
+	CMD_INTERROGATE	= 1, /* use this to read information elements */
+	CMD_CONFIGURE	= 2, /* use this to write information elements */
+	CMD_ENABLE_RX	= 3,
+	CMD_ENABLE_TX	= 4,
+	CMD_DISABLE_RX	= 5,
+	CMD_DISABLE_TX	= 6,
+	CMD_SCAN	= 7,
+	CMD_STOP_SCAN	= 8,
+	CMD_SET_KEYS	= 9,
+	CMD_READ_MEMORY	= 10,
+	CMD_WRITE_MEMORY	= 11,
+	CMD_SET_TEMPLATE	= 12,
+	CMD_TEST		= 13,
+	CMD_NOISE_HIST		= 14,
+	CMD_QUIET_ELEMENT_SET_STATE = 15,
+	CMD_SET_BCN_MODE	= 16,
+
+	CMD_MEASUREMENT		= 17,
+	CMD_STOP_MEASUREMENT	= 18,
+	CMD_SET_PS_MODE		= 19,
+	CMD_CHANNEL_SWITCH	= 20,
+	CMD_STOP_CHANNEL_SWICTH = 21,
+	CMD_AP_DISCOVERY	= 22,
+	CMD_STOP_AP_DISCOVERY	= 23,
+	CMD_HEALTH_CHECK	= 24,
+	CMD_DEBUG		= 25,
+	CMD_TRIGGER_SCAN_TO	= 26,
+	CMD_CONNECTION_SCAN_CFG	= 27,
+	CMD_CONNECTION_SCAN_SSID_CFG	= 28,
+	CMD_START_PERIODIC_SCAN	= 29,
+	CMD_STOP_PERIODIC_SCAN	= 30,
+	CMD_SET_PEER_STATE	= 31,
+	CMD_REMAIN_ON_CHANNEL	= 32,
+	CMD_CANCEL_REMAIN_ON_CHANNEL	= 33,
+	CMD_CONFIG_FWLOGGER		= 34,
+	CMD_START_FWLOGGER			= 35,
+	CMD_STOP_FWLOGGER			= 36,
+
+	/* Access point commands */
+	CMD_ADD_PEER		= 37,
+	CMD_REMOVE_PEER		= 38,
+
+	/* Role API */
+	CMD_ROLE_ENABLE		= 39,
+	CMD_ROLE_DISABLE	= 40,
+	CMD_ROLE_START		= 41,
+	CMD_ROLE_STOP		= 42,
+
+	/* DFS */
+	CMD_START_RADAR_DETECTION	= 43,
+	CMD_STOP_RADAR_DETECTION	= 44,
+
+	/* WIFI Direct */
+	CMD_WFD_START_DISCOVERY	= 45,
+	CMD_WFD_STOP_DISCOVERY	= 46,
+	CMD_WFD_ATTRIBUTE_CONFIG	= 47,
+	CMD_GENERIC_CFG			= 48,
+	CMD_NOP				= 49,
+
+	/* start of 18xx specific commands */
+	CMD_DFS_CHANNEL_CONFIG		= 60,
+	CMD_SMART_CONFIG_START		= 61,
+	CMD_SMART_CONFIG_STOP		= 62,
+	CMD_SMART_CONFIG_SET_GROUP_KEY	= 63,
+
+	CMD_CAC_START			= 64,
+	CMD_CAC_STOP			= 65,
+	CMD_DFS_MASTER_RESTART		= 66,
+	CMD_DFS_RADAR_DETECTION_DEBUG	= 67,
+
+	MAX_COMMAND_ID = 0xFFFF,
+};
+
+#define MAX_CMD_PARAMS 572
+
+enum cmd_templ {
+	CMD_TEMPL_NULL_DATA = 0,
+	CMD_TEMPL_BEACON,
+	CMD_TEMPL_CFG_PROBE_REQ_2_4,
+	CMD_TEMPL_CFG_PROBE_REQ_5,
+	CMD_TEMPL_PROBE_RESPONSE,
+	CMD_TEMPL_QOS_NULL_DATA,
+	CMD_TEMPL_PS_POLL,
+	CMD_TEMPL_KLV,
+	CMD_TEMPL_DISCONNECT,
+	CMD_TEMPL_APP_PROBE_REQ_2_4_LEGACY,
+	CMD_TEMPL_APP_PROBE_REQ_5_LEGACY,
+	CMD_TEMPL_BAR,           /* for firmware internal use only */
+	CMD_TEMPL_CTS,           /*
+				  * For CTS-to-self (FastCTS) mechanism
+				  * for BT/WLAN coexistence (SoftGemini). */
+	CMD_TEMPL_AP_BEACON,
+	CMD_TEMPL_AP_PROBE_RESPONSE,
+	CMD_TEMPL_ARP_RSP,
+	CMD_TEMPL_DEAUTH_AP,
+	CMD_TEMPL_TEMPORARY,
+	CMD_TEMPL_LINK_MEASUREMENT_REPORT,
+	CMD_TEMPL_PROBE_REQ_2_4_PERIODIC,
+	CMD_TEMPL_PROBE_REQ_5_PERIODIC,
+
+	CMD_TEMPL_MAX = 0xff
+};
+
+/* unit ms */
+#define WL1271_COMMAND_TIMEOUT     2000
+#define WL1271_CMD_TEMPL_DFLT_SIZE 252
+#define WL1271_CMD_TEMPL_MAX_SIZE  512
+#define WL1271_EVENT_TIMEOUT       5000
+
+struct wl1271_cmd_header {
+	__le16 id;
+	__le16 status;
+	/* payload */
+	u8 data[];
+} __packed;
+
+#define WL1271_CMD_MAX_PARAMS 572
+
+struct wl1271_command {
+	struct wl1271_cmd_header header;
+	u8  parameters[WL1271_CMD_MAX_PARAMS];
+} __packed;
+
+enum {
+	CMD_MAILBOX_IDLE		=  0,
+	CMD_STATUS_SUCCESS		=  1,
+	CMD_STATUS_UNKNOWN_CMD		=  2,
+	CMD_STATUS_UNKNOWN_IE		=  3,
+	CMD_STATUS_REJECT_MEAS_SG_ACTIVE	= 11,
+	CMD_STATUS_RX_BUSY		= 13,
+	CMD_STATUS_INVALID_PARAM		= 14,
+	CMD_STATUS_TEMPLATE_TOO_LARGE		= 15,
+	CMD_STATUS_OUT_OF_MEMORY		= 16,
+	CMD_STATUS_STA_TABLE_FULL		= 17,
+	CMD_STATUS_RADIO_ERROR		= 18,
+	CMD_STATUS_WRONG_NESTING		= 19,
+	CMD_STATUS_TIMEOUT		= 21, /* Driver internal use.*/
+	CMD_STATUS_FW_RESET		= 22, /* Driver internal use.*/
+	CMD_STATUS_TEMPLATE_OOM		= 23,
+	CMD_STATUS_NO_RX_BA_SESSION	= 24,
+
+	MAX_COMMAND_STATUS
+};
+
+#define CMDMBOX_HEADER_LEN 4
+#define CMDMBOX_INFO_ELEM_HEADER_LEN 4
+
+enum {
+	BSS_TYPE_IBSS = 0,
+	BSS_TYPE_STA_BSS = 2,
+	BSS_TYPE_AP_BSS = 3,
+	MAX_BSS_TYPE = 0xFF
+};
+
+#define WL1271_JOIN_CMD_CTRL_TX_FLUSH     0x80 /* Firmware flushes all Tx */
+#define WL1271_JOIN_CMD_TX_SESSION_OFFSET 1
+#define WL1271_JOIN_CMD_BSS_TYPE_5GHZ 0x10
+
+struct wl12xx_cmd_role_enable {
+	struct wl1271_cmd_header header;
+
+	u8 role_id;
+	u8 role_type;
+	u8 mac_address[ETH_ALEN];
+} __packed;
+
+struct wl12xx_cmd_role_disable {
+	struct wl1271_cmd_header header;
+
+	u8 role_id;
+	u8 padding[3];
+} __packed;
+
+enum wlcore_band {
+	WLCORE_BAND_2_4GHZ		= 0,
+	WLCORE_BAND_5GHZ		= 1,
+	WLCORE_BAND_JAPAN_4_9_GHZ	= 2,
+	WLCORE_BAND_DEFAULT		= WLCORE_BAND_2_4GHZ,
+	WLCORE_BAND_INVALID		= 0x7E,
+	WLCORE_BAND_MAX_RADIO		= 0x7F,
+};
+
+enum wlcore_channel_type {
+	WLCORE_CHAN_NO_HT,
+	WLCORE_CHAN_HT20,
+	WLCORE_CHAN_HT40MINUS,
+	WLCORE_CHAN_HT40PLUS
+};
+
+struct wl12xx_cmd_role_start {
+	struct wl1271_cmd_header header;
+
+	u8 role_id;
+	u8 band;
+	u8 channel;
+
+	/* enum wlcore_channel_type */
+	u8 channel_type;
+
+	union {
+		struct {
+			u8 hlid;
+			u8 session;
+			u8 padding_1[54];
+		} __packed device;
+		/* sta & p2p_cli use the same struct */
+		struct {
+			u8 bssid[ETH_ALEN];
+			u8 hlid; /* data hlid */
+			u8 session;
+			__le32 remote_rates; /* remote supported rates */
+
+			/*
+			 * The target uses this field to determine the rate at
+			 * which to transmit control frame responses (such as
+			 * ACK or CTS frames).
+			 */
+			__le32 basic_rate_set;
+			__le32 local_rates; /* local supported rates */
+
+			u8 ssid_type;
+			u8 ssid_len;
+			u8 ssid[IEEE80211_MAX_SSID_LEN];
+
+			__le16 beacon_interval; /* in TBTTs */
+		} __packed sta;
+		struct {
+			u8 bssid[ETH_ALEN];
+			u8 hlid; /* data hlid */
+			u8 dtim_interval;
+			__le32 remote_rates; /* remote supported rates */
+
+			__le32 basic_rate_set;
+			__le32 local_rates; /* local supported rates */
+
+			u8 ssid_type;
+			u8 ssid_len;
+			u8 ssid[IEEE80211_MAX_SSID_LEN];
+
+			__le16 beacon_interval; /* in TBTTs */
+
+			u8 padding_1[4];
+		} __packed ibss;
+		/* ap & p2p_go use the same struct */
+		struct {
+			__le16 aging_period; /* in secs */
+			u8 beacon_expiry; /* in ms */
+			u8 bss_index;
+			/* The host link id for the AP's global queue */
+			u8 global_hlid;
+			/* The host link id for the AP's broadcast queue */
+			u8 broadcast_hlid;
+
+			__le16 beacon_interval; /* in TBTTs */
+
+			__le32 basic_rate_set;
+			__le32 local_rates; /* local supported rates */
+
+			u8 dtim_interval;
+
+			u8 ssid_type;
+			u8 ssid_len;
+			u8 ssid[IEEE80211_MAX_SSID_LEN];
+
+			u8 reset_tsf;
+
+			/*
+			 * ap supports wmm (note that there is additional
+			 * per-sta wmm configuration)
+			 */
+			u8 wmm;
+
+			u8 bcast_session_id;
+			u8 global_session_id;
+			u8 padding_1[1];
+		} __packed ap;
+	};
+} __packed;
+
+struct wl12xx_cmd_role_stop {
+	struct wl1271_cmd_header header;
+
+	u8 role_id;
+	u8 disc_type; /* only STA and P2P_CLI */
+	__le16 reason; /* only STA and P2P_CLI */
+} __packed;
+
+struct cmd_enabledisable_path {
+	struct wl1271_cmd_header header;
+
+	u8 channel;
+	u8 padding[3];
+} __packed;
+
+#define WL1271_RATE_AUTOMATIC  0
+
+struct wl1271_cmd_template_set {
+	struct wl1271_cmd_header header;
+
+	u8 role_id;
+	u8 template_type;
+	__le16 len;
+	u8 index;  /* relevant only for KLV_TEMPLATE type */
+	u8 padding[3];
+
+	__le32 enabled_rates;
+	u8 short_retry_limit;
+	u8 long_retry_limit;
+	u8 aflags;
+	u8 reserved;
+
+	u8 template_data[WL1271_CMD_TEMPL_MAX_SIZE];
+} __packed;
+
+#define TIM_ELE_ID    5
+#define PARTIAL_VBM_MAX    251
+
+struct wl1271_tim {
+	u8 identity;
+	u8 length;
+	u8 dtim_count;
+	u8 dtim_period;
+	u8 bitmap_ctrl;
+	u8 pvb_field[PARTIAL_VBM_MAX]; /* Partial Virtual Bitmap */
+} __packed;
+
+enum wl1271_cmd_ps_mode {
+	STATION_AUTO_PS_MODE,   /* Dynamic Power Save */
+	STATION_ACTIVE_MODE,
+	STATION_POWER_SAVE_MODE
+};
+
+struct wl1271_cmd_ps_params {
+	struct wl1271_cmd_header header;
+
+	u8 role_id;
+	u8 ps_mode; /* STATION_* */
+	u16 auto_ps_timeout;
+} __packed;
+
+/* HW encryption keys */
+#define NUM_ACCESS_CATEGORIES_COPY 4
+
+enum wl1271_cmd_key_action {
+	KEY_ADD_OR_REPLACE = 1,
+	KEY_REMOVE         = 2,
+	KEY_SET_ID         = 3,
+	MAX_KEY_ACTION     = 0xffff,
+};
+
+enum wl1271_cmd_lid_key_type {
+	UNICAST_LID_TYPE     = 0,
+	BROADCAST_LID_TYPE   = 1,
+	WEP_DEFAULT_LID_TYPE = 2
+};
+
+enum wl1271_cmd_key_type {
+	KEY_NONE = 0,
+	KEY_WEP  = 1,
+	KEY_TKIP = 2,
+	KEY_AES  = 3,
+	KEY_GEM  = 4,
+};
+
+struct wl1271_cmd_set_keys {
+	struct wl1271_cmd_header header;
+
+	/*
+	 * Indicates whether the HLID is a unicast key set
+	 * or broadcast key set. A special value 0xFF is
+	 * used to indicate that the HLID is on WEP-default
+	 * (multi-hlids). of type wl1271_cmd_lid_key_type.
+	 */
+	u8 hlid;
+
+	/*
+	 * In WEP-default network (hlid == 0xFF) used to
+	 * indicate which network STA/IBSS/AP role should be
+	 * changed
+	 */
+	u8 lid_key_type;
+
+	/*
+	 * Key ID - For TKIP and AES key types, this field
+	 * indicates the value that should be inserted into
+	 * the KeyID field of frames transmitted using this
+	 * key entry. For broadcast keys the index use as a
+	 * marker for TX/RX key.
+	 * For WEP default network (HLID=0xFF), this field
+	 * indicates the ID of the key to add or remove.
+	 */
+	u8 key_id;
+	u8 reserved_1;
+
+	/* key_action_e */
+	__le16 key_action;
+
+	/* key size in bytes */
+	u8 key_size;
+
+	/* key_type_e */
+	u8 key_type;
+
+	/* This field holds the security key data to add to the STA table */
+	u8 key[MAX_KEY_SIZE];
+	__le16 ac_seq_num16[NUM_ACCESS_CATEGORIES_COPY];
+	__le32 ac_seq_num32[NUM_ACCESS_CATEGORIES_COPY];
+} __packed;
+
+struct wl1271_cmd_test_header {
+	u8 id;
+	u8 padding[3];
+} __packed;
+
+enum wl1271_channel_tune_bands {
+	WL1271_CHANNEL_TUNE_BAND_2_4,
+	WL1271_CHANNEL_TUNE_BAND_5,
+	WL1271_CHANNEL_TUNE_BAND_4_9
+};
+
+#define WL1271_PD_REFERENCE_POINT_BAND_B_G  0
+
+/*
+ * There are three types of disconnections:
+ *
+ * DISCONNECT_IMMEDIATE: the fw doesn't send any frames
+ * DISCONNECT_DEAUTH:    the fw generates a DEAUTH request with the reason
+ *                       we have passed
+ * DISCONNECT_DISASSOC:  the fw generates a DESASSOC request with the reason
+ *                       we have passed
+ */
+enum wl1271_disconnect_type {
+	DISCONNECT_IMMEDIATE,
+	DISCONNECT_DEAUTH,
+	DISCONNECT_DISASSOC
+};
+
+#define WL1271_CMD_STA_STATE_CONNECTED  1
+
+struct wl12xx_cmd_set_peer_state {
+	struct wl1271_cmd_header header;
+
+	u8 hlid;
+	u8 state;
+
+	/*
+	 * wmm is relevant for sta role only.
+	 * ap role configures the per-sta wmm params in
+	 * the add_peer command.
+	 */
+	u8 wmm;
+	u8 padding[1];
+} __packed;
+
+struct wl12xx_cmd_roc {
+	struct wl1271_cmd_header header;
+
+	u8 role_id;
+	u8 channel;
+	u8 band;
+	u8 padding;
+};
+
+struct wl12xx_cmd_croc {
+	struct wl1271_cmd_header header;
+
+	u8 role_id;
+	u8 padding[3];
+};
+
+enum wl12xx_ssid_type {
+	WL12XX_SSID_TYPE_PUBLIC = 0,
+	WL12XX_SSID_TYPE_HIDDEN = 1,
+	WL12XX_SSID_TYPE_ANY = 2,
+};
+
+enum wl1271_psd_type {
+	WL1271_PSD_LEGACY = 0,
+	WL1271_PSD_UPSD_TRIGGER = 1,
+	WL1271_PSD_LEGACY_PSPOLL = 2,
+	WL1271_PSD_SAPSD = 3
+};
+
+struct wl12xx_cmd_add_peer {
+	struct wl1271_cmd_header header;
+
+	u8 addr[ETH_ALEN];
+	u8 hlid;
+	u8 aid;
+	u8 psd_type[NUM_ACCESS_CATEGORIES_COPY];
+	__le32 supported_rates;
+	u8 bss_index;
+	u8 sp_len;
+	u8 wmm;
+	u8 session_id;
+	u8 role_id;
+	u8 padding[3];
+} __packed;
+
+struct wl12xx_cmd_remove_peer {
+	struct wl1271_cmd_header header;
+
+	u8 hlid;
+	u8 reason_opcode;
+	u8 send_deauth_flag;
+	u8 role_id;
+} __packed;
+
+/*
+ * Continuous mode - packets are transferred to the host periodically
+ * via the data path.
+ * On demand - Log messages are stored in a cyclic buffer in the
+ * firmware, and only transferred to the host when explicitly requested
+ */
+enum wl12xx_fwlogger_log_mode {
+	WL12XX_FWLOG_CONTINUOUS,
+};
+
+/* Include/exclude timestamps from the log messages */
+enum wl12xx_fwlogger_timestamp {
+	WL12XX_FWLOG_TIMESTAMP_DISABLED,
+	WL12XX_FWLOG_TIMESTAMP_ENABLED
+};
+
+/*
+ * Logs can be routed to the debug pinouts (where available), to the host bus
+ * (SDIO/SPI), or dropped
+ */
+enum wl12xx_fwlogger_output {
+	WL12XX_FWLOG_OUTPUT_NONE,
+	WL12XX_FWLOG_OUTPUT_DBG_PINS,
+	WL12XX_FWLOG_OUTPUT_HOST,
+};
+
+struct wl12xx_cmd_regdomain_dfs_config {
+	struct wl1271_cmd_header header;
+
+	__le32 ch_bit_map1;
+	__le32 ch_bit_map2;
+	u8 dfs_region;
+	u8 padding[3];
+} __packed;
+
+enum wlcore_generic_cfg_feature {
+	WLCORE_CFG_FEATURE_RADAR_DEBUG = 2,
+};
+
+struct wlcore_cmd_generic_cfg {
+	struct wl1271_cmd_header header;
+
+	u8 role_id;
+	u8 feature;
+	u8 enable;
+	u8 value;
+} __packed;
+
+struct wl12xx_cmd_config_fwlog {
+	struct wl1271_cmd_header header;
+
+	/* See enum wl12xx_fwlogger_log_mode */
+	u8 logger_mode;
+
+	/* Minimum log level threshold */
+	u8 log_severity;
+
+	/* Include/exclude timestamps from the log messages */
+	u8 timestamp;
+
+	/* See enum wl1271_fwlogger_output */
+	u8 output;
+
+	/* Regulates the frequency of log messages */
+	u8 threshold;
+
+	u8 padding[3];
+} __packed;
+
+struct wl12xx_cmd_start_fwlog {
+	struct wl1271_cmd_header header;
+} __packed;
+
+struct wl12xx_cmd_stop_fwlog {
+	struct wl1271_cmd_header header;
+} __packed;
+
+struct wl12xx_cmd_stop_channel_switch {
+	struct wl1271_cmd_header header;
+
+	u8 role_id;
+	u8 padding[3];
+} __packed;
+
+/* Used to check radio status after calibration */
+#define MAX_TLV_LENGTH		500
+#define TEST_CMD_P2G_CAL	2	/* TX BiP */
+
+struct wl1271_cmd_cal_p2g {
+	struct wl1271_cmd_header header;
+
+	struct wl1271_cmd_test_header test;
+
+	__le32 ver;
+	__le16 len;
+	u8 buf[MAX_TLV_LENGTH];
+	u8 type;
+	u8 padding;
+
+	__le16 radio_status;
+
+	u8 sub_band_mask;
+	u8 padding2;
+} __packed;
+
+#endif /* __WL1271_CMD_H__ */