Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 500 insertions, 0 deletions

diff --git a/drivers/pci/controller/dwc/pcie-artpec6.c b/drivers/pci/controller/dwc/pcie-artpec6.c
new file mode 100644
index 000000000..98102079e
--- /dev/null
+++ b/drivers/pci/controller/dwc/pcie-artpec6.c
@@ -0,0 +1,500 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * PCIe host controller driver for Axis ARTPEC-6 SoC
+ *
+ * Author: Niklas Cassel <niklas.cassel@axis.com>
+ *
+ * Based on work done by Phil Edworthy <phil@edworthys.org>
+ */
+
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/of_device.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/resource.h>
+#include <linux/signal.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+
+#include "pcie-designware.h"
+
+#define to_artpec6_pcie(x)	dev_get_drvdata((x)->dev)
+
+enum artpec_pcie_variants {
+	ARTPEC6,
+	ARTPEC7,
+};
+
+struct artpec6_pcie {
+	struct dw_pcie		*pci;
+	struct regmap		*regmap;	/* DT axis,syscon-pcie */
+	void __iomem		*phy_base;	/* DT phy */
+	enum artpec_pcie_variants variant;
+	enum dw_pcie_device_mode mode;
+};
+
+struct artpec_pcie_of_data {
+	enum artpec_pcie_variants variant;
+	enum dw_pcie_device_mode mode;
+};
+
+static const struct of_device_id artpec6_pcie_of_match[];
+
+/* ARTPEC-6 specific registers */
+#define PCIECFG				0x18
+#define  PCIECFG_DBG_OEN		BIT(24)
+#define  PCIECFG_CORE_RESET_REQ		BIT(21)
+#define  PCIECFG_LTSSM_ENABLE		BIT(20)
+#define  PCIECFG_DEVICE_TYPE_MASK	GENMASK(19, 16)
+#define  PCIECFG_CLKREQ_B		BIT(11)
+#define  PCIECFG_REFCLK_ENABLE		BIT(10)
+#define  PCIECFG_PLL_ENABLE		BIT(9)
+#define  PCIECFG_PCLK_ENABLE		BIT(8)
+#define  PCIECFG_RISRCREN		BIT(4)
+#define  PCIECFG_MODE_TX_DRV_EN		BIT(3)
+#define  PCIECFG_CISRREN		BIT(2)
+#define  PCIECFG_MACRO_ENABLE		BIT(0)
+/* ARTPEC-7 specific fields */
+#define  PCIECFG_REFCLKSEL		BIT(23)
+#define  PCIECFG_NOC_RESET		BIT(3)
+
+#define PCIESTAT			0x1c
+/* ARTPEC-7 specific fields */
+#define  PCIESTAT_EXTREFCLK		BIT(3)
+
+#define NOCCFG				0x40
+#define  NOCCFG_ENABLE_CLK_PCIE		BIT(4)
+#define  NOCCFG_POWER_PCIE_IDLEACK	BIT(3)
+#define  NOCCFG_POWER_PCIE_IDLE		BIT(2)
+#define  NOCCFG_POWER_PCIE_IDLEREQ	BIT(1)
+
+#define PHY_STATUS			0x118
+#define  PHY_COSPLLLOCK			BIT(0)
+
+#define PHY_TX_ASIC_OUT			0x4040
+#define  PHY_TX_ASIC_OUT_TX_ACK		BIT(0)
+
+#define PHY_RX_ASIC_OUT			0x405c
+#define  PHY_RX_ASIC_OUT_ACK		BIT(0)
+
+static u32 artpec6_pcie_readl(struct artpec6_pcie *artpec6_pcie, u32 offset)
+{
+	u32 val;
+
+	regmap_read(artpec6_pcie->regmap, offset, &val);
+	return val;
+}
+
+static void artpec6_pcie_writel(struct artpec6_pcie *artpec6_pcie, u32 offset, u32 val)
+{
+	regmap_write(artpec6_pcie->regmap, offset, val);
+}
+
+static u64 artpec6_pcie_cpu_addr_fixup(struct dw_pcie *pci, u64 pci_addr)
+{
+	struct artpec6_pcie *artpec6_pcie = to_artpec6_pcie(pci);
+	struct dw_pcie_rp *pp = &pci->pp;
+	struct dw_pcie_ep *ep = &pci->ep;
+
+	switch (artpec6_pcie->mode) {
+	case DW_PCIE_RC_TYPE:
+		return pci_addr - pp->cfg0_base;
+	case DW_PCIE_EP_TYPE:
+		return pci_addr - ep->phys_base;
+	default:
+		dev_err(pci->dev, "UNKNOWN device type\n");
+	}
+	return pci_addr;
+}
+
+static int artpec6_pcie_establish_link(struct dw_pcie *pci)
+{
+	struct artpec6_pcie *artpec6_pcie = to_artpec6_pcie(pci);
+	u32 val;
+
+	val = artpec6_pcie_readl(artpec6_pcie, PCIECFG);
+	val |= PCIECFG_LTSSM_ENABLE;
+	artpec6_pcie_writel(artpec6_pcie, PCIECFG, val);
+
+	return 0;
+}
+
+static void artpec6_pcie_stop_link(struct dw_pcie *pci)
+{
+	struct artpec6_pcie *artpec6_pcie = to_artpec6_pcie(pci);
+	u32 val;
+
+	val = artpec6_pcie_readl(artpec6_pcie, PCIECFG);
+	val &= ~PCIECFG_LTSSM_ENABLE;
+	artpec6_pcie_writel(artpec6_pcie, PCIECFG, val);
+}
+
+static const struct dw_pcie_ops dw_pcie_ops = {
+	.cpu_addr_fixup = artpec6_pcie_cpu_addr_fixup,
+	.start_link = artpec6_pcie_establish_link,
+	.stop_link = artpec6_pcie_stop_link,
+};
+
+static void artpec6_pcie_wait_for_phy_a6(struct artpec6_pcie *artpec6_pcie)
+{
+	struct dw_pcie *pci = artpec6_pcie->pci;
+	struct device *dev = pci->dev;
+	u32 val;
+	unsigned int retries;
+
+	retries = 50;
+	do {
+		usleep_range(1000, 2000);
+		val = artpec6_pcie_readl(artpec6_pcie, NOCCFG);
+		retries--;
+	} while (retries &&
+		(val & (NOCCFG_POWER_PCIE_IDLEACK | NOCCFG_POWER_PCIE_IDLE)));
+	if (!retries)
+		dev_err(dev, "PCIe clock manager did not leave idle state\n");
+
+	retries = 50;
+	do {
+		usleep_range(1000, 2000);
+		val = readl(artpec6_pcie->phy_base + PHY_STATUS);
+		retries--;
+	} while (retries && !(val & PHY_COSPLLLOCK));
+	if (!retries)
+		dev_err(dev, "PHY PLL did not lock\n");
+}
+
+static void artpec6_pcie_wait_for_phy_a7(struct artpec6_pcie *artpec6_pcie)
+{
+	struct dw_pcie *pci = artpec6_pcie->pci;
+	struct device *dev = pci->dev;
+	u32 val;
+	u16 phy_status_tx, phy_status_rx;
+	unsigned int retries;
+
+	retries = 50;
+	do {
+		usleep_range(1000, 2000);
+		val = artpec6_pcie_readl(artpec6_pcie, NOCCFG);
+		retries--;
+	} while (retries &&
+		(val & (NOCCFG_POWER_PCIE_IDLEACK | NOCCFG_POWER_PCIE_IDLE)));
+	if (!retries)
+		dev_err(dev, "PCIe clock manager did not leave idle state\n");
+
+	retries = 50;
+	do {
+		usleep_range(1000, 2000);
+		phy_status_tx = readw(artpec6_pcie->phy_base + PHY_TX_ASIC_OUT);
+		phy_status_rx = readw(artpec6_pcie->phy_base + PHY_RX_ASIC_OUT);
+		retries--;
+	} while (retries && ((phy_status_tx & PHY_TX_ASIC_OUT_TX_ACK) ||
+				(phy_status_rx & PHY_RX_ASIC_OUT_ACK)));
+	if (!retries)
+		dev_err(dev, "PHY did not enter Pn state\n");
+}
+
+static void artpec6_pcie_wait_for_phy(struct artpec6_pcie *artpec6_pcie)
+{
+	switch (artpec6_pcie->variant) {
+	case ARTPEC6:
+		artpec6_pcie_wait_for_phy_a6(artpec6_pcie);
+		break;
+	case ARTPEC7:
+		artpec6_pcie_wait_for_phy_a7(artpec6_pcie);
+		break;
+	}
+}
+
+static void artpec6_pcie_init_phy_a6(struct artpec6_pcie *artpec6_pcie)
+{
+	u32 val;
+
+	val = artpec6_pcie_readl(artpec6_pcie, PCIECFG);
+	val |=  PCIECFG_RISRCREN |	/* Receiver term. 50 Ohm */
+		PCIECFG_MODE_TX_DRV_EN |
+		PCIECFG_CISRREN |	/* Reference clock term. 100 Ohm */
+		PCIECFG_MACRO_ENABLE;
+	val |= PCIECFG_REFCLK_ENABLE;
+	val &= ~PCIECFG_DBG_OEN;
+	val &= ~PCIECFG_CLKREQ_B;
+	artpec6_pcie_writel(artpec6_pcie, PCIECFG, val);
+	usleep_range(5000, 6000);
+
+	val = artpec6_pcie_readl(artpec6_pcie, NOCCFG);
+	val |= NOCCFG_ENABLE_CLK_PCIE;
+	artpec6_pcie_writel(artpec6_pcie, NOCCFG, val);
+	usleep_range(20, 30);
+
+	val = artpec6_pcie_readl(artpec6_pcie, PCIECFG);
+	val |= PCIECFG_PCLK_ENABLE | PCIECFG_PLL_ENABLE;
+	artpec6_pcie_writel(artpec6_pcie, PCIECFG, val);
+	usleep_range(6000, 7000);
+
+	val = artpec6_pcie_readl(artpec6_pcie, NOCCFG);
+	val &= ~NOCCFG_POWER_PCIE_IDLEREQ;
+	artpec6_pcie_writel(artpec6_pcie, NOCCFG, val);
+}
+
+static void artpec6_pcie_init_phy_a7(struct artpec6_pcie *artpec6_pcie)
+{
+	struct dw_pcie *pci = artpec6_pcie->pci;
+	u32 val;
+	bool extrefclk;
+
+	/* Check if external reference clock is connected */
+	val = artpec6_pcie_readl(artpec6_pcie, PCIESTAT);
+	extrefclk = !!(val & PCIESTAT_EXTREFCLK);
+	dev_dbg(pci->dev, "Using reference clock: %s\n",
+		extrefclk ? "external" : "internal");
+
+	val = artpec6_pcie_readl(artpec6_pcie, PCIECFG);
+	val |=  PCIECFG_RISRCREN |	/* Receiver term. 50 Ohm */
+		PCIECFG_PCLK_ENABLE;
+	if (extrefclk)
+		val |= PCIECFG_REFCLKSEL;
+	else
+		val &= ~PCIECFG_REFCLKSEL;
+	artpec6_pcie_writel(artpec6_pcie, PCIECFG, val);
+	usleep_range(10, 20);
+
+	val = artpec6_pcie_readl(artpec6_pcie, NOCCFG);
+	val |= NOCCFG_ENABLE_CLK_PCIE;
+	artpec6_pcie_writel(artpec6_pcie, NOCCFG, val);
+	usleep_range(20, 30);
+
+	val = artpec6_pcie_readl(artpec6_pcie, NOCCFG);
+	val &= ~NOCCFG_POWER_PCIE_IDLEREQ;
+	artpec6_pcie_writel(artpec6_pcie, NOCCFG, val);
+}
+
+static void artpec6_pcie_init_phy(struct artpec6_pcie *artpec6_pcie)
+{
+	switch (artpec6_pcie->variant) {
+	case ARTPEC6:
+		artpec6_pcie_init_phy_a6(artpec6_pcie);
+		break;
+	case ARTPEC7:
+		artpec6_pcie_init_phy_a7(artpec6_pcie);
+		break;
+	}
+}
+
+static void artpec6_pcie_assert_core_reset(struct artpec6_pcie *artpec6_pcie)
+{
+	u32 val;
+
+	val = artpec6_pcie_readl(artpec6_pcie, PCIECFG);
+	switch (artpec6_pcie->variant) {
+	case ARTPEC6:
+		val |= PCIECFG_CORE_RESET_REQ;
+		break;
+	case ARTPEC7:
+		val &= ~PCIECFG_NOC_RESET;
+		break;
+	}
+	artpec6_pcie_writel(artpec6_pcie, PCIECFG, val);
+}
+
+static void artpec6_pcie_deassert_core_reset(struct artpec6_pcie *artpec6_pcie)
+{
+	u32 val;
+
+	val = artpec6_pcie_readl(artpec6_pcie, PCIECFG);
+	switch (artpec6_pcie->variant) {
+	case ARTPEC6:
+		val &= ~PCIECFG_CORE_RESET_REQ;
+		break;
+	case ARTPEC7:
+		val |= PCIECFG_NOC_RESET;
+		break;
+	}
+	artpec6_pcie_writel(artpec6_pcie, PCIECFG, val);
+	usleep_range(100, 200);
+}
+
+static int artpec6_pcie_host_init(struct dw_pcie_rp *pp)
+{
+	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
+	struct artpec6_pcie *artpec6_pcie = to_artpec6_pcie(pci);
+
+	if (artpec6_pcie->variant == ARTPEC7) {
+		pci->n_fts[0] = 180;
+		pci->n_fts[1] = 180;
+	}
+	artpec6_pcie_assert_core_reset(artpec6_pcie);
+	artpec6_pcie_init_phy(artpec6_pcie);
+	artpec6_pcie_deassert_core_reset(artpec6_pcie);
+	artpec6_pcie_wait_for_phy(artpec6_pcie);
+
+	return 0;
+}
+
+static const struct dw_pcie_host_ops artpec6_pcie_host_ops = {
+	.host_init = artpec6_pcie_host_init,
+};
+
+static void artpec6_pcie_ep_init(struct dw_pcie_ep *ep)
+{
+	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+	struct artpec6_pcie *artpec6_pcie = to_artpec6_pcie(pci);
+	enum pci_barno bar;
+
+	artpec6_pcie_assert_core_reset(artpec6_pcie);
+	artpec6_pcie_init_phy(artpec6_pcie);
+	artpec6_pcie_deassert_core_reset(artpec6_pcie);
+	artpec6_pcie_wait_for_phy(artpec6_pcie);
+
+	for (bar = 0; bar < PCI_STD_NUM_BARS; bar++)
+		dw_pcie_ep_reset_bar(pci, bar);
+}
+
+static int artpec6_pcie_raise_irq(struct dw_pcie_ep *ep, u8 func_no,
+				  enum pci_epc_irq_type type, u16 interrupt_num)
+{
+	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+
+	switch (type) {
+	case PCI_EPC_IRQ_LEGACY:
+		dev_err(pci->dev, "EP cannot trigger legacy IRQs\n");
+		return -EINVAL;
+	case PCI_EPC_IRQ_MSI:
+		return dw_pcie_ep_raise_msi_irq(ep, func_no, interrupt_num);
+	default:
+		dev_err(pci->dev, "UNKNOWN IRQ type\n");
+	}
+
+	return 0;
+}
+
+static const struct dw_pcie_ep_ops pcie_ep_ops = {
+	.ep_init = artpec6_pcie_ep_init,
+	.raise_irq = artpec6_pcie_raise_irq,
+};
+
+static int artpec6_pcie_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct dw_pcie *pci;
+	struct artpec6_pcie *artpec6_pcie;
+	int ret;
+	const struct artpec_pcie_of_data *data;
+	enum artpec_pcie_variants variant;
+	enum dw_pcie_device_mode mode;
+	u32 val;
+
+	data = of_device_get_match_data(dev);
+	if (!data)
+		return -EINVAL;
+
+	variant = (enum artpec_pcie_variants)data->variant;
+	mode = (enum dw_pcie_device_mode)data->mode;
+
+	artpec6_pcie = devm_kzalloc(dev, sizeof(*artpec6_pcie), GFP_KERNEL);
+	if (!artpec6_pcie)
+		return -ENOMEM;
+
+	pci = devm_kzalloc(dev, sizeof(*pci), GFP_KERNEL);
+	if (!pci)
+		return -ENOMEM;
+
+	pci->dev = dev;
+	pci->ops = &dw_pcie_ops;
+
+	artpec6_pcie->pci = pci;
+	artpec6_pcie->variant = variant;
+	artpec6_pcie->mode = mode;
+
+	artpec6_pcie->phy_base =
+		devm_platform_ioremap_resource_byname(pdev, "phy");
+	if (IS_ERR(artpec6_pcie->phy_base))
+		return PTR_ERR(artpec6_pcie->phy_base);
+
+	artpec6_pcie->regmap =
+		syscon_regmap_lookup_by_phandle(dev->of_node,
+						"axis,syscon-pcie");
+	if (IS_ERR(artpec6_pcie->regmap))
+		return PTR_ERR(artpec6_pcie->regmap);
+
+	platform_set_drvdata(pdev, artpec6_pcie);
+
+	switch (artpec6_pcie->mode) {
+	case DW_PCIE_RC_TYPE:
+		if (!IS_ENABLED(CONFIG_PCIE_ARTPEC6_HOST))
+			return -ENODEV;
+
+		pci->pp.ops = &artpec6_pcie_host_ops;
+
+		ret = dw_pcie_host_init(&pci->pp);
+		if (ret < 0)
+			return ret;
+		break;
+	case DW_PCIE_EP_TYPE:
+		if (!IS_ENABLED(CONFIG_PCIE_ARTPEC6_EP))
+			return -ENODEV;
+
+		val = artpec6_pcie_readl(artpec6_pcie, PCIECFG);
+		val &= ~PCIECFG_DEVICE_TYPE_MASK;
+		artpec6_pcie_writel(artpec6_pcie, PCIECFG, val);
+
+		pci->ep.ops = &pcie_ep_ops;
+
+		return dw_pcie_ep_init(&pci->ep);
+	default:
+		dev_err(dev, "INVALID device type %d\n", artpec6_pcie->mode);
+	}
+
+	return 0;
+}
+
+static const struct artpec_pcie_of_data artpec6_pcie_rc_of_data = {
+	.variant = ARTPEC6,
+	.mode = DW_PCIE_RC_TYPE,
+};
+
+static const struct artpec_pcie_of_data artpec6_pcie_ep_of_data = {
+	.variant = ARTPEC6,
+	.mode = DW_PCIE_EP_TYPE,
+};
+
+static const struct artpec_pcie_of_data artpec7_pcie_rc_of_data = {
+	.variant = ARTPEC7,
+	.mode = DW_PCIE_RC_TYPE,
+};
+
+static const struct artpec_pcie_of_data artpec7_pcie_ep_of_data = {
+	.variant = ARTPEC7,
+	.mode = DW_PCIE_EP_TYPE,
+};
+
+static const struct of_device_id artpec6_pcie_of_match[] = {
+	{
+		.compatible = "axis,artpec6-pcie",
+		.data = &artpec6_pcie_rc_of_data,
+	},
+	{
+		.compatible = "axis,artpec6-pcie-ep",
+		.data = &artpec6_pcie_ep_of_data,
+	},
+	{
+		.compatible = "axis,artpec7-pcie",
+		.data = &artpec7_pcie_rc_of_data,
+	},
+	{
+		.compatible = "axis,artpec7-pcie-ep",
+		.data = &artpec7_pcie_ep_of_data,
+	},
+	{},
+};
+
+static struct platform_driver artpec6_pcie_driver = {
+	.probe = artpec6_pcie_probe,
+	.driver = {
+		.name	= "artpec6-pcie",
+		.of_match_table = artpec6_pcie_of_match,
+		.suppress_bind_attrs = true,
+	},
+};
+builtin_platform_driver(artpec6_pcie_driver);