Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 356 insertions, 0 deletions

diff --git a/drivers/pci/controller/dwc/pcie-fu740.c b/drivers/pci/controller/dwc/pcie-fu740.c
new file mode 100644
index 000000000..0c90583c0
--- /dev/null
+++ b/drivers/pci/controller/dwc/pcie-fu740.c
@@ -0,0 +1,356 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * FU740 DesignWare PCIe Controller integration
+ * Copyright (C) 2019-2021 SiFive, Inc.
+ * Paul Walmsley
+ * Greentime Hu
+ *
+ * Based in part on the i.MX6 PCIe host controller shim which is:
+ *
+ * Copyright (C) 2013 Kosagi
+ *		https://www.kosagi.com
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/resource.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/iopoll.h>
+#include <linux/reset.h>
+
+#include "pcie-designware.h"
+
+#define to_fu740_pcie(x)	dev_get_drvdata((x)->dev)
+
+struct fu740_pcie {
+	struct dw_pcie pci;
+	void __iomem *mgmt_base;
+	struct gpio_desc *reset;
+	struct gpio_desc *pwren;
+	struct clk *pcie_aux;
+	struct reset_control *rst;
+};
+
+#define SIFIVE_DEVICESRESETREG		0x28
+
+#define PCIEX8MGMT_PERST_N		0x0
+#define PCIEX8MGMT_APP_LTSSM_ENABLE	0x10
+#define PCIEX8MGMT_APP_HOLD_PHY_RST	0x18
+#define PCIEX8MGMT_DEVICE_TYPE		0x708
+#define PCIEX8MGMT_PHY0_CR_PARA_ADDR	0x860
+#define PCIEX8MGMT_PHY0_CR_PARA_RD_EN	0x870
+#define PCIEX8MGMT_PHY0_CR_PARA_RD_DATA	0x878
+#define PCIEX8MGMT_PHY0_CR_PARA_SEL	0x880
+#define PCIEX8MGMT_PHY0_CR_PARA_WR_DATA	0x888
+#define PCIEX8MGMT_PHY0_CR_PARA_WR_EN	0x890
+#define PCIEX8MGMT_PHY0_CR_PARA_ACK	0x898
+#define PCIEX8MGMT_PHY1_CR_PARA_ADDR	0x8a0
+#define PCIEX8MGMT_PHY1_CR_PARA_RD_EN	0x8b0
+#define PCIEX8MGMT_PHY1_CR_PARA_RD_DATA	0x8b8
+#define PCIEX8MGMT_PHY1_CR_PARA_SEL	0x8c0
+#define PCIEX8MGMT_PHY1_CR_PARA_WR_DATA	0x8c8
+#define PCIEX8MGMT_PHY1_CR_PARA_WR_EN	0x8d0
+#define PCIEX8MGMT_PHY1_CR_PARA_ACK	0x8d8
+
+#define PCIEX8MGMT_PHY_CDR_TRACK_EN	BIT(0)
+#define PCIEX8MGMT_PHY_LOS_THRSHLD	BIT(5)
+#define PCIEX8MGMT_PHY_TERM_EN		BIT(9)
+#define PCIEX8MGMT_PHY_TERM_ACDC	BIT(10)
+#define PCIEX8MGMT_PHY_EN		BIT(11)
+#define PCIEX8MGMT_PHY_INIT_VAL		(PCIEX8MGMT_PHY_CDR_TRACK_EN|\
+					 PCIEX8MGMT_PHY_LOS_THRSHLD|\
+					 PCIEX8MGMT_PHY_TERM_EN|\
+					 PCIEX8MGMT_PHY_TERM_ACDC|\
+					 PCIEX8MGMT_PHY_EN)
+
+#define PCIEX8MGMT_PHY_LANEN_DIG_ASIC_RX_OVRD_IN_3	0x1008
+#define PCIEX8MGMT_PHY_LANE_OFF		0x100
+#define PCIEX8MGMT_PHY_LANE0_BASE	(PCIEX8MGMT_PHY_LANEN_DIG_ASIC_RX_OVRD_IN_3 + 0x100 * 0)
+#define PCIEX8MGMT_PHY_LANE1_BASE	(PCIEX8MGMT_PHY_LANEN_DIG_ASIC_RX_OVRD_IN_3 + 0x100 * 1)
+#define PCIEX8MGMT_PHY_LANE2_BASE	(PCIEX8MGMT_PHY_LANEN_DIG_ASIC_RX_OVRD_IN_3 + 0x100 * 2)
+#define PCIEX8MGMT_PHY_LANE3_BASE	(PCIEX8MGMT_PHY_LANEN_DIG_ASIC_RX_OVRD_IN_3 + 0x100 * 3)
+
+static void fu740_pcie_assert_reset(struct fu740_pcie *afp)
+{
+	/* Assert PERST_N GPIO */
+	gpiod_set_value_cansleep(afp->reset, 0);
+	/* Assert controller PERST_N */
+	writel_relaxed(0x0, afp->mgmt_base + PCIEX8MGMT_PERST_N);
+}
+
+static void fu740_pcie_deassert_reset(struct fu740_pcie *afp)
+{
+	/* Deassert controller PERST_N */
+	writel_relaxed(0x1, afp->mgmt_base + PCIEX8MGMT_PERST_N);
+	/* Deassert PERST_N GPIO */
+	gpiod_set_value_cansleep(afp->reset, 1);
+}
+
+static void fu740_pcie_power_on(struct fu740_pcie *afp)
+{
+	gpiod_set_value_cansleep(afp->pwren, 1);
+	/*
+	 * Ensure that PERST has been asserted for at least 100 ms.
+	 * Section 2.2 of PCI Express Card Electromechanical Specification
+	 * Revision 3.0
+	 */
+	msleep(100);
+}
+
+static void fu740_pcie_drive_reset(struct fu740_pcie *afp)
+{
+	fu740_pcie_assert_reset(afp);
+	fu740_pcie_power_on(afp);
+	fu740_pcie_deassert_reset(afp);
+}
+
+static void fu740_phyregwrite(const uint8_t phy, const uint16_t addr,
+			      const uint16_t wrdata, struct fu740_pcie *afp)
+{
+	struct device *dev = afp->pci.dev;
+	void __iomem *phy_cr_para_addr;
+	void __iomem *phy_cr_para_wr_data;
+	void __iomem *phy_cr_para_wr_en;
+	void __iomem *phy_cr_para_ack;
+	int ret, val;
+
+	/* Setup */
+	if (phy) {
+		phy_cr_para_addr = afp->mgmt_base + PCIEX8MGMT_PHY1_CR_PARA_ADDR;
+		phy_cr_para_wr_data = afp->mgmt_base + PCIEX8MGMT_PHY1_CR_PARA_WR_DATA;
+		phy_cr_para_wr_en = afp->mgmt_base + PCIEX8MGMT_PHY1_CR_PARA_WR_EN;
+		phy_cr_para_ack = afp->mgmt_base + PCIEX8MGMT_PHY1_CR_PARA_ACK;
+	} else {
+		phy_cr_para_addr = afp->mgmt_base + PCIEX8MGMT_PHY0_CR_PARA_ADDR;
+		phy_cr_para_wr_data = afp->mgmt_base + PCIEX8MGMT_PHY0_CR_PARA_WR_DATA;
+		phy_cr_para_wr_en = afp->mgmt_base + PCIEX8MGMT_PHY0_CR_PARA_WR_EN;
+		phy_cr_para_ack = afp->mgmt_base + PCIEX8MGMT_PHY0_CR_PARA_ACK;
+	}
+
+	writel_relaxed(addr, phy_cr_para_addr);
+	writel_relaxed(wrdata, phy_cr_para_wr_data);
+	writel_relaxed(1, phy_cr_para_wr_en);
+
+	/* Wait for wait_idle */
+	ret = readl_poll_timeout(phy_cr_para_ack, val, val, 10, 5000);
+	if (ret)
+		dev_warn(dev, "Wait for wait_idle state failed!\n");
+
+	/* Clear */
+	writel_relaxed(0, phy_cr_para_wr_en);
+
+	/* Wait for ~wait_idle */
+	ret = readl_poll_timeout(phy_cr_para_ack, val, !val, 10, 5000);
+	if (ret)
+		dev_warn(dev, "Wait for !wait_idle state failed!\n");
+}
+
+static void fu740_pcie_init_phy(struct fu740_pcie *afp)
+{
+	/* Enable phy cr_para_sel interfaces */
+	writel_relaxed(0x1, afp->mgmt_base + PCIEX8MGMT_PHY0_CR_PARA_SEL);
+	writel_relaxed(0x1, afp->mgmt_base + PCIEX8MGMT_PHY1_CR_PARA_SEL);
+
+	/*
+	 * Wait 10 cr_para cycles to guarantee that the registers are ready
+	 * to be edited.
+	 */
+	ndelay(10);
+
+	/* Set PHY AC termination mode */
+	fu740_phyregwrite(0, PCIEX8MGMT_PHY_LANE0_BASE, PCIEX8MGMT_PHY_INIT_VAL, afp);
+	fu740_phyregwrite(0, PCIEX8MGMT_PHY_LANE1_BASE, PCIEX8MGMT_PHY_INIT_VAL, afp);
+	fu740_phyregwrite(0, PCIEX8MGMT_PHY_LANE2_BASE, PCIEX8MGMT_PHY_INIT_VAL, afp);
+	fu740_phyregwrite(0, PCIEX8MGMT_PHY_LANE3_BASE, PCIEX8MGMT_PHY_INIT_VAL, afp);
+	fu740_phyregwrite(1, PCIEX8MGMT_PHY_LANE0_BASE, PCIEX8MGMT_PHY_INIT_VAL, afp);
+	fu740_phyregwrite(1, PCIEX8MGMT_PHY_LANE1_BASE, PCIEX8MGMT_PHY_INIT_VAL, afp);
+	fu740_phyregwrite(1, PCIEX8MGMT_PHY_LANE2_BASE, PCIEX8MGMT_PHY_INIT_VAL, afp);
+	fu740_phyregwrite(1, PCIEX8MGMT_PHY_LANE3_BASE, PCIEX8MGMT_PHY_INIT_VAL, afp);
+}
+
+static int fu740_pcie_start_link(struct dw_pcie *pci)
+{
+	struct device *dev = pci->dev;
+	struct fu740_pcie *afp = dev_get_drvdata(dev);
+	u8 cap_exp = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
+	int ret;
+	u32 orig, tmp;
+
+	/*
+	 * Force 2.5GT/s when starting the link, due to some devices not
+	 * probing at higher speeds. This happens with the PCIe switch
+	 * on the Unmatched board when U-Boot has not initialised the PCIe.
+	 * The fix in U-Boot is to force 2.5GT/s, which then gets cleared
+	 * by the soft reset done by this driver.
+	 */
+	dev_dbg(dev, "cap_exp at %x\n", cap_exp);
+	dw_pcie_dbi_ro_wr_en(pci);
+
+	tmp = dw_pcie_readl_dbi(pci, cap_exp + PCI_EXP_LNKCAP);
+	orig = tmp & PCI_EXP_LNKCAP_SLS;
+	tmp &= ~PCI_EXP_LNKCAP_SLS;
+	tmp |= PCI_EXP_LNKCAP_SLS_2_5GB;
+	dw_pcie_writel_dbi(pci, cap_exp + PCI_EXP_LNKCAP, tmp);
+
+	/* Enable LTSSM */
+	writel_relaxed(0x1, afp->mgmt_base + PCIEX8MGMT_APP_LTSSM_ENABLE);
+
+	ret = dw_pcie_wait_for_link(pci);
+	if (ret) {
+		dev_err(dev, "error: link did not start\n");
+		goto err;
+	}
+
+	tmp = dw_pcie_readl_dbi(pci, cap_exp + PCI_EXP_LNKCAP);
+	if ((tmp & PCI_EXP_LNKCAP_SLS) != orig) {
+		dev_dbg(dev, "changing speed back to original\n");
+
+		tmp &= ~PCI_EXP_LNKCAP_SLS;
+		tmp |= orig;
+		dw_pcie_writel_dbi(pci, cap_exp + PCI_EXP_LNKCAP, tmp);
+
+		tmp = dw_pcie_readl_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL);
+		tmp |= PORT_LOGIC_SPEED_CHANGE;
+		dw_pcie_writel_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL, tmp);
+
+		ret = dw_pcie_wait_for_link(pci);
+		if (ret) {
+			dev_err(dev, "error: link did not start at new speed\n");
+			goto err;
+		}
+	}
+
+	ret = 0;
+err:
+	WARN_ON(ret);	/* we assume that errors will be very rare */
+	dw_pcie_dbi_ro_wr_dis(pci);
+	return ret;
+}
+
+static int fu740_pcie_host_init(struct dw_pcie_rp *pp)
+{
+	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
+	struct fu740_pcie *afp = to_fu740_pcie(pci);
+	struct device *dev = pci->dev;
+	int ret;
+
+	/* Power on reset */
+	fu740_pcie_drive_reset(afp);
+
+	/* Enable pcieauxclk */
+	ret = clk_prepare_enable(afp->pcie_aux);
+	if (ret) {
+		dev_err(dev, "unable to enable pcie_aux clock\n");
+		return ret;
+	}
+
+	/*
+	 * Assert hold_phy_rst (hold the controller LTSSM in reset after
+	 * power_up_rst_n for register programming with cr_para)
+	 */
+	writel_relaxed(0x1, afp->mgmt_base + PCIEX8MGMT_APP_HOLD_PHY_RST);
+
+	/* Deassert power_up_rst_n */
+	ret = reset_control_deassert(afp->rst);
+	if (ret) {
+		dev_err(dev, "unable to deassert pcie_power_up_rst_n\n");
+		return ret;
+	}
+
+	fu740_pcie_init_phy(afp);
+
+	/* Disable pcieauxclk */
+	clk_disable_unprepare(afp->pcie_aux);
+	/* Clear hold_phy_rst */
+	writel_relaxed(0x0, afp->mgmt_base + PCIEX8MGMT_APP_HOLD_PHY_RST);
+	/* Enable pcieauxclk */
+	clk_prepare_enable(afp->pcie_aux);
+	/* Set RC mode */
+	writel_relaxed(0x4, afp->mgmt_base + PCIEX8MGMT_DEVICE_TYPE);
+
+	return 0;
+}
+
+static const struct dw_pcie_host_ops fu740_pcie_host_ops = {
+	.host_init = fu740_pcie_host_init,
+};
+
+static const struct dw_pcie_ops dw_pcie_ops = {
+	.start_link = fu740_pcie_start_link,
+};
+
+static int fu740_pcie_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct dw_pcie *pci;
+	struct fu740_pcie *afp;
+
+	afp = devm_kzalloc(dev, sizeof(*afp), GFP_KERNEL);
+	if (!afp)
+		return -ENOMEM;
+	pci = &afp->pci;
+	pci->dev = dev;
+	pci->ops = &dw_pcie_ops;
+	pci->pp.ops = &fu740_pcie_host_ops;
+
+	/* SiFive specific region: mgmt */
+	afp->mgmt_base = devm_platform_ioremap_resource_byname(pdev, "mgmt");
+	if (IS_ERR(afp->mgmt_base))
+		return PTR_ERR(afp->mgmt_base);
+
+	/* Fetch GPIOs */
+	afp->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
+	if (IS_ERR(afp->reset))
+		return dev_err_probe(dev, PTR_ERR(afp->reset), "unable to get reset-gpios\n");
+
+	afp->pwren = devm_gpiod_get_optional(dev, "pwren", GPIOD_OUT_LOW);
+	if (IS_ERR(afp->pwren))
+		return dev_err_probe(dev, PTR_ERR(afp->pwren), "unable to get pwren-gpios\n");
+
+	/* Fetch clocks */
+	afp->pcie_aux = devm_clk_get(dev, "pcie_aux");
+	if (IS_ERR(afp->pcie_aux))
+		return dev_err_probe(dev, PTR_ERR(afp->pcie_aux),
+					     "pcie_aux clock source missing or invalid\n");
+
+	/* Fetch reset */
+	afp->rst = devm_reset_control_get_exclusive(dev, NULL);
+	if (IS_ERR(afp->rst))
+		return dev_err_probe(dev, PTR_ERR(afp->rst), "unable to get reset\n");
+
+	platform_set_drvdata(pdev, afp);
+
+	return dw_pcie_host_init(&pci->pp);
+}
+
+static void fu740_pcie_shutdown(struct platform_device *pdev)
+{
+	struct fu740_pcie *afp = platform_get_drvdata(pdev);
+
+	/* Bring down link, so bootloader gets clean state in case of reboot */
+	fu740_pcie_assert_reset(afp);
+}
+
+static const struct of_device_id fu740_pcie_of_match[] = {
+	{ .compatible = "sifive,fu740-pcie", },
+	{},
+};
+
+static struct platform_driver fu740_pcie_driver = {
+	.driver = {
+		   .name = "fu740-pcie",
+		   .of_match_table = fu740_pcie_of_match,
+		   .suppress_bind_attrs = true,
+	},
+	.probe = fu740_pcie_probe,
+	.shutdown = fu740_pcie_shutdown,
+};
+
+builtin_platform_driver(fu740_pcie_driver);