Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 343 insertions, 0 deletions

diff --git a/drivers/pci/controller/pci-rcar-gen2.c b/drivers/pci/controller/pci-rcar-gen2.c
new file mode 100644
index 000000000..839695791
--- /dev/null
+++ b/drivers/pci/controller/pci-rcar-gen2.c
@@ -0,0 +1,343 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  pci-rcar-gen2: internal PCI bus support
+ *
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ * Copyright (C) 2013 Cogent Embedded, Inc.
+ *
+ * Author: Valentine Barshak <valentine.barshak@cogentembedded.com>
+ */
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/of_address.h>
+#include <linux/of_pci.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/sizes.h>
+#include <linux/slab.h>
+
+#include "../pci.h"
+
+/* AHB-PCI Bridge PCI communication registers */
+#define RCAR_AHBPCI_PCICOM_OFFSET	0x800
+
+#define RCAR_PCIAHB_WIN1_CTR_REG	(RCAR_AHBPCI_PCICOM_OFFSET + 0x00)
+#define RCAR_PCIAHB_WIN2_CTR_REG	(RCAR_AHBPCI_PCICOM_OFFSET + 0x04)
+#define RCAR_PCIAHB_PREFETCH0		0x0
+#define RCAR_PCIAHB_PREFETCH4		0x1
+#define RCAR_PCIAHB_PREFETCH8		0x2
+#define RCAR_PCIAHB_PREFETCH16		0x3
+
+#define RCAR_AHBPCI_WIN1_CTR_REG	(RCAR_AHBPCI_PCICOM_OFFSET + 0x10)
+#define RCAR_AHBPCI_WIN2_CTR_REG	(RCAR_AHBPCI_PCICOM_OFFSET + 0x14)
+#define RCAR_AHBPCI_WIN_CTR_MEM		(3 << 1)
+#define RCAR_AHBPCI_WIN_CTR_CFG		(5 << 1)
+#define RCAR_AHBPCI_WIN1_HOST		(1 << 30)
+#define RCAR_AHBPCI_WIN1_DEVICE		(1 << 31)
+
+#define RCAR_PCI_INT_ENABLE_REG		(RCAR_AHBPCI_PCICOM_OFFSET + 0x20)
+#define RCAR_PCI_INT_STATUS_REG		(RCAR_AHBPCI_PCICOM_OFFSET + 0x24)
+#define RCAR_PCI_INT_SIGTABORT		(1 << 0)
+#define RCAR_PCI_INT_SIGRETABORT	(1 << 1)
+#define RCAR_PCI_INT_REMABORT		(1 << 2)
+#define RCAR_PCI_INT_PERR		(1 << 3)
+#define RCAR_PCI_INT_SIGSERR		(1 << 4)
+#define RCAR_PCI_INT_RESERR		(1 << 5)
+#define RCAR_PCI_INT_WIN1ERR		(1 << 12)
+#define RCAR_PCI_INT_WIN2ERR		(1 << 13)
+#define RCAR_PCI_INT_A			(1 << 16)
+#define RCAR_PCI_INT_B			(1 << 17)
+#define RCAR_PCI_INT_PME		(1 << 19)
+#define RCAR_PCI_INT_ALLERRORS (RCAR_PCI_INT_SIGTABORT		| \
+				RCAR_PCI_INT_SIGRETABORT	| \
+				RCAR_PCI_INT_REMABORT		| \
+				RCAR_PCI_INT_PERR		| \
+				RCAR_PCI_INT_SIGSERR		| \
+				RCAR_PCI_INT_RESERR		| \
+				RCAR_PCI_INT_WIN1ERR		| \
+				RCAR_PCI_INT_WIN2ERR)
+
+#define RCAR_AHB_BUS_CTR_REG		(RCAR_AHBPCI_PCICOM_OFFSET + 0x30)
+#define RCAR_AHB_BUS_MMODE_HTRANS	(1 << 0)
+#define RCAR_AHB_BUS_MMODE_BYTE_BURST	(1 << 1)
+#define RCAR_AHB_BUS_MMODE_WR_INCR	(1 << 2)
+#define RCAR_AHB_BUS_MMODE_HBUS_REQ	(1 << 7)
+#define RCAR_AHB_BUS_SMODE_READYCTR	(1 << 17)
+#define RCAR_AHB_BUS_MODE		(RCAR_AHB_BUS_MMODE_HTRANS |	\
+					RCAR_AHB_BUS_MMODE_BYTE_BURST |	\
+					RCAR_AHB_BUS_MMODE_WR_INCR |	\
+					RCAR_AHB_BUS_MMODE_HBUS_REQ |	\
+					RCAR_AHB_BUS_SMODE_READYCTR)
+
+#define RCAR_USBCTR_REG			(RCAR_AHBPCI_PCICOM_OFFSET + 0x34)
+#define RCAR_USBCTR_USBH_RST		(1 << 0)
+#define RCAR_USBCTR_PCICLK_MASK		(1 << 1)
+#define RCAR_USBCTR_PLL_RST		(1 << 2)
+#define RCAR_USBCTR_DIRPD		(1 << 8)
+#define RCAR_USBCTR_PCIAHB_WIN2_EN	(1 << 9)
+#define RCAR_USBCTR_PCIAHB_WIN1_256M	(0 << 10)
+#define RCAR_USBCTR_PCIAHB_WIN1_512M	(1 << 10)
+#define RCAR_USBCTR_PCIAHB_WIN1_1G	(2 << 10)
+#define RCAR_USBCTR_PCIAHB_WIN1_2G	(3 << 10)
+#define RCAR_USBCTR_PCIAHB_WIN1_MASK	(3 << 10)
+
+#define RCAR_PCI_ARBITER_CTR_REG	(RCAR_AHBPCI_PCICOM_OFFSET + 0x40)
+#define RCAR_PCI_ARBITER_PCIREQ0	(1 << 0)
+#define RCAR_PCI_ARBITER_PCIREQ1	(1 << 1)
+#define RCAR_PCI_ARBITER_PCIBP_MODE	(1 << 12)
+
+#define RCAR_PCI_UNIT_REV_REG		(RCAR_AHBPCI_PCICOM_OFFSET + 0x48)
+
+struct rcar_pci {
+	struct device *dev;
+	void __iomem *reg;
+	struct resource mem_res;
+	struct resource *cfg_res;
+	int irq;
+};
+
+/* PCI configuration space operations */
+static void __iomem *rcar_pci_cfg_base(struct pci_bus *bus, unsigned int devfn,
+				       int where)
+{
+	struct rcar_pci *priv = bus->sysdata;
+	int slot, val;
+
+	if (!pci_is_root_bus(bus) || PCI_FUNC(devfn))
+		return NULL;
+
+	/* Only one EHCI/OHCI device built-in */
+	slot = PCI_SLOT(devfn);
+	if (slot > 2)
+		return NULL;
+
+	/* bridge logic only has registers to 0x40 */
+	if (slot == 0x0 && where >= 0x40)
+		return NULL;
+
+	val = slot ? RCAR_AHBPCI_WIN1_DEVICE | RCAR_AHBPCI_WIN_CTR_CFG :
+		     RCAR_AHBPCI_WIN1_HOST | RCAR_AHBPCI_WIN_CTR_CFG;
+
+	iowrite32(val, priv->reg + RCAR_AHBPCI_WIN1_CTR_REG);
+	return priv->reg + (slot >> 1) * 0x100 + where;
+}
+
+#ifdef CONFIG_PCI_DEBUG
+/* if debug enabled, then attach an error handler irq to the bridge */
+
+static irqreturn_t rcar_pci_err_irq(int irq, void *pw)
+{
+	struct rcar_pci *priv = pw;
+	struct device *dev = priv->dev;
+	u32 status = ioread32(priv->reg + RCAR_PCI_INT_STATUS_REG);
+
+	if (status & RCAR_PCI_INT_ALLERRORS) {
+		dev_err(dev, "error irq: status %08x\n", status);
+
+		/* clear the error(s) */
+		iowrite32(status & RCAR_PCI_INT_ALLERRORS,
+			  priv->reg + RCAR_PCI_INT_STATUS_REG);
+		return IRQ_HANDLED;
+	}
+
+	return IRQ_NONE;
+}
+
+static void rcar_pci_setup_errirq(struct rcar_pci *priv)
+{
+	struct device *dev = priv->dev;
+	int ret;
+	u32 val;
+
+	ret = devm_request_irq(dev, priv->irq, rcar_pci_err_irq,
+			       IRQF_SHARED, "error irq", priv);
+	if (ret) {
+		dev_err(dev, "cannot claim IRQ for error handling\n");
+		return;
+	}
+
+	val = ioread32(priv->reg + RCAR_PCI_INT_ENABLE_REG);
+	val |= RCAR_PCI_INT_ALLERRORS;
+	iowrite32(val, priv->reg + RCAR_PCI_INT_ENABLE_REG);
+}
+#else
+static inline void rcar_pci_setup_errirq(struct rcar_pci *priv) { }
+#endif
+
+/* PCI host controller setup */
+static void rcar_pci_setup(struct rcar_pci *priv)
+{
+	struct pci_host_bridge *bridge = pci_host_bridge_from_priv(priv);
+	struct device *dev = priv->dev;
+	void __iomem *reg = priv->reg;
+	struct resource_entry *entry;
+	unsigned long window_size;
+	unsigned long window_addr;
+	unsigned long window_pci;
+	u32 val;
+
+	entry = resource_list_first_type(&bridge->dma_ranges, IORESOURCE_MEM);
+	if (!entry) {
+		window_addr = 0x40000000;
+		window_pci = 0x40000000;
+		window_size = SZ_1G;
+	} else {
+		window_addr = entry->res->start;
+		window_pci = entry->res->start - entry->offset;
+		window_size = resource_size(entry->res);
+	}
+
+	pm_runtime_enable(dev);
+	pm_runtime_get_sync(dev);
+
+	val = ioread32(reg + RCAR_PCI_UNIT_REV_REG);
+	dev_info(dev, "PCI: revision %x\n", val);
+
+	/* Disable Direct Power Down State and assert reset */
+	val = ioread32(reg + RCAR_USBCTR_REG) & ~RCAR_USBCTR_DIRPD;
+	val |= RCAR_USBCTR_USBH_RST | RCAR_USBCTR_PLL_RST;
+	iowrite32(val, reg + RCAR_USBCTR_REG);
+	udelay(4);
+
+	/* De-assert reset and reset PCIAHB window1 size */
+	val &= ~(RCAR_USBCTR_PCIAHB_WIN1_MASK | RCAR_USBCTR_PCICLK_MASK |
+		 RCAR_USBCTR_USBH_RST | RCAR_USBCTR_PLL_RST);
+
+	/* Setup PCIAHB window1 size */
+	switch (window_size) {
+	case SZ_2G:
+		val |= RCAR_USBCTR_PCIAHB_WIN1_2G;
+		break;
+	case SZ_1G:
+		val |= RCAR_USBCTR_PCIAHB_WIN1_1G;
+		break;
+	case SZ_512M:
+		val |= RCAR_USBCTR_PCIAHB_WIN1_512M;
+		break;
+	default:
+		pr_warn("unknown window size %ld - defaulting to 256M\n",
+			window_size);
+		window_size = SZ_256M;
+		fallthrough;
+	case SZ_256M:
+		val |= RCAR_USBCTR_PCIAHB_WIN1_256M;
+		break;
+	}
+	iowrite32(val, reg + RCAR_USBCTR_REG);
+
+	/* Configure AHB master and slave modes */
+	iowrite32(RCAR_AHB_BUS_MODE, reg + RCAR_AHB_BUS_CTR_REG);
+
+	/* Configure PCI arbiter */
+	val = ioread32(reg + RCAR_PCI_ARBITER_CTR_REG);
+	val |= RCAR_PCI_ARBITER_PCIREQ0 | RCAR_PCI_ARBITER_PCIREQ1 |
+	       RCAR_PCI_ARBITER_PCIBP_MODE;
+	iowrite32(val, reg + RCAR_PCI_ARBITER_CTR_REG);
+
+	/* PCI-AHB mapping */
+	iowrite32(window_addr | RCAR_PCIAHB_PREFETCH16,
+		  reg + RCAR_PCIAHB_WIN1_CTR_REG);
+
+	/* AHB-PCI mapping: OHCI/EHCI registers */
+	val = priv->mem_res.start | RCAR_AHBPCI_WIN_CTR_MEM;
+	iowrite32(val, reg + RCAR_AHBPCI_WIN2_CTR_REG);
+
+	/* Enable AHB-PCI bridge PCI configuration access */
+	iowrite32(RCAR_AHBPCI_WIN1_HOST | RCAR_AHBPCI_WIN_CTR_CFG,
+		  reg + RCAR_AHBPCI_WIN1_CTR_REG);
+	/* Set PCI-AHB Window1 address */
+	iowrite32(window_pci | PCI_BASE_ADDRESS_MEM_PREFETCH,
+		  reg + PCI_BASE_ADDRESS_1);
+	/* Set AHB-PCI bridge PCI communication area address */
+	val = priv->cfg_res->start + RCAR_AHBPCI_PCICOM_OFFSET;
+	iowrite32(val, reg + PCI_BASE_ADDRESS_0);
+
+	val = ioread32(reg + PCI_COMMAND);
+	val |= PCI_COMMAND_SERR | PCI_COMMAND_PARITY |
+	       PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER;
+	iowrite32(val, reg + PCI_COMMAND);
+
+	/* Enable PCI interrupts */
+	iowrite32(RCAR_PCI_INT_A | RCAR_PCI_INT_B | RCAR_PCI_INT_PME,
+		  reg + RCAR_PCI_INT_ENABLE_REG);
+
+	rcar_pci_setup_errirq(priv);
+}
+
+static struct pci_ops rcar_pci_ops = {
+	.map_bus = rcar_pci_cfg_base,
+	.read	= pci_generic_config_read,
+	.write	= pci_generic_config_write,
+};
+
+static int rcar_pci_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct resource *cfg_res, *mem_res;
+	struct rcar_pci *priv;
+	struct pci_host_bridge *bridge;
+	void __iomem *reg;
+
+	bridge = devm_pci_alloc_host_bridge(dev, sizeof(*priv));
+	if (!bridge)
+		return -ENOMEM;
+
+	priv = pci_host_bridge_priv(bridge);
+	bridge->sysdata = priv;
+
+	cfg_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	reg = devm_ioremap_resource(dev, cfg_res);
+	if (IS_ERR(reg))
+		return PTR_ERR(reg);
+
+	mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (!mem_res || !mem_res->start)
+		return -ENODEV;
+
+	if (mem_res->start & 0xFFFF)
+		return -EINVAL;
+
+	priv->mem_res = *mem_res;
+	priv->cfg_res = cfg_res;
+
+	priv->irq = platform_get_irq(pdev, 0);
+	priv->reg = reg;
+	priv->dev = dev;
+
+	if (priv->irq < 0) {
+		dev_err(dev, "no valid irq found\n");
+		return priv->irq;
+	}
+
+	bridge->ops = &rcar_pci_ops;
+
+	pci_add_flags(PCI_REASSIGN_ALL_BUS);
+
+	rcar_pci_setup(priv);
+
+	return pci_host_probe(bridge);
+}
+
+static const struct of_device_id rcar_pci_of_match[] = {
+	{ .compatible = "renesas,pci-r8a7790", },
+	{ .compatible = "renesas,pci-r8a7791", },
+	{ .compatible = "renesas,pci-r8a7794", },
+	{ .compatible = "renesas,pci-rcar-gen2", },
+	{ .compatible = "renesas,pci-rzn1", },
+	{ },
+};
+
+static struct platform_driver rcar_pci_driver = {
+	.driver = {
+		.name = "pci-rcar-gen2",
+		.suppress_bind_attrs = true,
+		.of_match_table = rcar_pci_of_match,
+	},
+	.probe = rcar_pci_probe,
+};
+builtin_platform_driver(rcar_pci_driver);