Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 522 insertions, 0 deletions

diff --git a/drivers/platform/surface/aggregator/bus.c b/drivers/platform/surface/aggregator/bus.c
new file mode 100644
index 000000000..7004eb4a6
--- /dev/null
+++ b/drivers/platform/surface/aggregator/bus.c
@@ -0,0 +1,522 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Surface System Aggregator Module bus and device integration.
+ *
+ * Copyright (C) 2019-2022 Maximilian Luz <luzmaximilian@gmail.com>
+ */
+
+#include <linux/device.h>
+#include <linux/property.h>
+#include <linux/slab.h>
+
+#include <linux/surface_aggregator/controller.h>
+#include <linux/surface_aggregator/device.h>
+
+#include "bus.h"
+#include "controller.h"
+
+
+/* -- Device and bus functions. --------------------------------------------- */
+
+static ssize_t modalias_show(struct device *dev, struct device_attribute *attr,
+			     char *buf)
+{
+	struct ssam_device *sdev = to_ssam_device(dev);
+
+	return sysfs_emit(buf, "ssam:d%02Xc%02Xt%02Xi%02Xf%02X\n",
+			sdev->uid.domain, sdev->uid.category, sdev->uid.target,
+			sdev->uid.instance, sdev->uid.function);
+}
+static DEVICE_ATTR_RO(modalias);
+
+static struct attribute *ssam_device_attrs[] = {
+	&dev_attr_modalias.attr,
+	NULL,
+};
+ATTRIBUTE_GROUPS(ssam_device);
+
+static int ssam_device_uevent(struct device *dev, struct kobj_uevent_env *env)
+{
+	struct ssam_device *sdev = to_ssam_device(dev);
+
+	return add_uevent_var(env, "MODALIAS=ssam:d%02Xc%02Xt%02Xi%02Xf%02X",
+			      sdev->uid.domain, sdev->uid.category,
+			      sdev->uid.target, sdev->uid.instance,
+			      sdev->uid.function);
+}
+
+static void ssam_device_release(struct device *dev)
+{
+	struct ssam_device *sdev = to_ssam_device(dev);
+
+	ssam_controller_put(sdev->ctrl);
+	fwnode_handle_put(sdev->dev.fwnode);
+	kfree(sdev);
+}
+
+const struct device_type ssam_device_type = {
+	.name    = "surface_aggregator_device",
+	.groups  = ssam_device_groups,
+	.uevent  = ssam_device_uevent,
+	.release = ssam_device_release,
+};
+EXPORT_SYMBOL_GPL(ssam_device_type);
+
+/**
+ * ssam_device_alloc() - Allocate and initialize a SSAM client device.
+ * @ctrl: The controller under which the device should be added.
+ * @uid:  The UID of the device to be added.
+ *
+ * Allocates and initializes a new client device. The parent of the device
+ * will be set to the controller device and the name will be set based on the
+ * UID. Note that the device still has to be added via ssam_device_add().
+ * Refer to that function for more details.
+ *
+ * Return: Returns the newly allocated and initialized SSAM client device, or
+ * %NULL if it could not be allocated.
+ */
+struct ssam_device *ssam_device_alloc(struct ssam_controller *ctrl,
+				      struct ssam_device_uid uid)
+{
+	struct ssam_device *sdev;
+
+	sdev = kzalloc(sizeof(*sdev), GFP_KERNEL);
+	if (!sdev)
+		return NULL;
+
+	device_initialize(&sdev->dev);
+	sdev->dev.bus = &ssam_bus_type;
+	sdev->dev.type = &ssam_device_type;
+	sdev->dev.parent = ssam_controller_device(ctrl);
+	sdev->ctrl = ssam_controller_get(ctrl);
+	sdev->uid = uid;
+
+	dev_set_name(&sdev->dev, "%02x:%02x:%02x:%02x:%02x",
+		     sdev->uid.domain, sdev->uid.category, sdev->uid.target,
+		     sdev->uid.instance, sdev->uid.function);
+
+	return sdev;
+}
+EXPORT_SYMBOL_GPL(ssam_device_alloc);
+
+/**
+ * ssam_device_add() - Add a SSAM client device.
+ * @sdev: The SSAM client device to be added.
+ *
+ * Added client devices must be guaranteed to always have a valid and active
+ * controller. Thus, this function will fail with %-ENODEV if the controller
+ * of the device has not been initialized yet, has been suspended, or has been
+ * shut down.
+ *
+ * The caller of this function should ensure that the corresponding call to
+ * ssam_device_remove() is issued before the controller is shut down. If the
+ * added device is a direct child of the controller device (default), it will
+ * be automatically removed when the controller is shut down.
+ *
+ * By default, the controller device will become the parent of the newly
+ * created client device. The parent may be changed before ssam_device_add is
+ * called, but care must be taken that a) the correct suspend/resume ordering
+ * is guaranteed and b) the client device does not outlive the controller,
+ * i.e. that the device is removed before the controller is being shut down.
+ * In case these guarantees have to be manually enforced, please refer to the
+ * ssam_client_link() and ssam_client_bind() functions, which are intended to
+ * set up device-links for this purpose.
+ *
+ * Return: Returns zero on success, a negative error code on failure.
+ */
+int ssam_device_add(struct ssam_device *sdev)
+{
+	int status;
+
+	/*
+	 * Ensure that we can only add new devices to a controller if it has
+	 * been started and is not going away soon. This works in combination
+	 * with ssam_controller_remove_clients to ensure driver presence for the
+	 * controller device, i.e. it ensures that the controller (sdev->ctrl)
+	 * is always valid and can be used for requests as long as the client
+	 * device we add here is registered as child under it. This essentially
+	 * guarantees that the client driver can always expect the preconditions
+	 * for functions like ssam_request_do_sync() (controller has to be
+	 * started and is not suspended) to hold and thus does not have to check
+	 * for them.
+	 *
+	 * Note that for this to work, the controller has to be a parent device.
+	 * If it is not a direct parent, care has to be taken that the device is
+	 * removed via ssam_device_remove(), as device_unregister does not
+	 * remove child devices recursively.
+	 */
+	ssam_controller_statelock(sdev->ctrl);
+
+	if (sdev->ctrl->state != SSAM_CONTROLLER_STARTED) {
+		ssam_controller_stateunlock(sdev->ctrl);
+		return -ENODEV;
+	}
+
+	status = device_add(&sdev->dev);
+
+	ssam_controller_stateunlock(sdev->ctrl);
+	return status;
+}
+EXPORT_SYMBOL_GPL(ssam_device_add);
+
+/**
+ * ssam_device_remove() - Remove a SSAM client device.
+ * @sdev: The device to remove.
+ *
+ * Removes and unregisters the provided SSAM client device.
+ */
+void ssam_device_remove(struct ssam_device *sdev)
+{
+	device_unregister(&sdev->dev);
+}
+EXPORT_SYMBOL_GPL(ssam_device_remove);
+
+/**
+ * ssam_device_id_compatible() - Check if a device ID matches a UID.
+ * @id:  The device ID as potential match.
+ * @uid: The device UID matching against.
+ *
+ * Check if the given ID is a match for the given UID, i.e. if a device with
+ * the provided UID is compatible to the given ID following the match rules
+ * described in its &ssam_device_id.match_flags member.
+ *
+ * Return: Returns %true if the given UID is compatible to the match rule
+ * described by the given ID, %false otherwise.
+ */
+static bool ssam_device_id_compatible(const struct ssam_device_id *id,
+				      struct ssam_device_uid uid)
+{
+	if (id->domain != uid.domain || id->category != uid.category)
+		return false;
+
+	if ((id->match_flags & SSAM_MATCH_TARGET) && id->target != uid.target)
+		return false;
+
+	if ((id->match_flags & SSAM_MATCH_INSTANCE) && id->instance != uid.instance)
+		return false;
+
+	if ((id->match_flags & SSAM_MATCH_FUNCTION) && id->function != uid.function)
+		return false;
+
+	return true;
+}
+
+/**
+ * ssam_device_id_is_null() - Check if a device ID is null.
+ * @id: The device ID to check.
+ *
+ * Check if a given device ID is null, i.e. all zeros. Used to check for the
+ * end of ``MODULE_DEVICE_TABLE(ssam, ...)`` or similar lists.
+ *
+ * Return: Returns %true if the given ID represents a null ID, %false
+ * otherwise.
+ */
+static bool ssam_device_id_is_null(const struct ssam_device_id *id)
+{
+	return id->match_flags == 0 &&
+		id->domain == 0 &&
+		id->category == 0 &&
+		id->target == 0 &&
+		id->instance == 0 &&
+		id->function == 0 &&
+		id->driver_data == 0;
+}
+
+/**
+ * ssam_device_id_match() - Find the matching ID table entry for the given UID.
+ * @table: The table to search in.
+ * @uid:   The UID to matched against the individual table entries.
+ *
+ * Find the first match for the provided device UID in the provided ID table
+ * and return it. Returns %NULL if no match could be found.
+ */
+const struct ssam_device_id *ssam_device_id_match(const struct ssam_device_id *table,
+						  const struct ssam_device_uid uid)
+{
+	const struct ssam_device_id *id;
+
+	for (id = table; !ssam_device_id_is_null(id); ++id)
+		if (ssam_device_id_compatible(id, uid))
+			return id;
+
+	return NULL;
+}
+EXPORT_SYMBOL_GPL(ssam_device_id_match);
+
+/**
+ * ssam_device_get_match() - Find and return the ID matching the device in the
+ * ID table of the bound driver.
+ * @dev: The device for which to get the matching ID table entry.
+ *
+ * Find the fist match for the UID of the device in the ID table of the
+ * currently bound driver and return it. Returns %NULL if the device does not
+ * have a driver bound to it, the driver does not have match_table (i.e. it is
+ * %NULL), or there is no match in the driver's match_table.
+ *
+ * This function essentially calls ssam_device_id_match() with the ID table of
+ * the bound device driver and the UID of the device.
+ *
+ * Return: Returns the first match for the UID of the device in the device
+ * driver's match table, or %NULL if no such match could be found.
+ */
+const struct ssam_device_id *ssam_device_get_match(const struct ssam_device *dev)
+{
+	const struct ssam_device_driver *sdrv;
+
+	sdrv = to_ssam_device_driver(dev->dev.driver);
+	if (!sdrv)
+		return NULL;
+
+	if (!sdrv->match_table)
+		return NULL;
+
+	return ssam_device_id_match(sdrv->match_table, dev->uid);
+}
+EXPORT_SYMBOL_GPL(ssam_device_get_match);
+
+/**
+ * ssam_device_get_match_data() - Find the ID matching the device in the
+ * ID table of the bound driver and return its ``driver_data`` member.
+ * @dev: The device for which to get the match data.
+ *
+ * Find the fist match for the UID of the device in the ID table of the
+ * corresponding driver and return its driver_data. Returns %NULL if the
+ * device does not have a driver bound to it, the driver does not have
+ * match_table (i.e. it is %NULL), there is no match in the driver's
+ * match_table, or the match does not have any driver_data.
+ *
+ * This function essentially calls ssam_device_get_match() and, if any match
+ * could be found, returns its ``struct ssam_device_id.driver_data`` member.
+ *
+ * Return: Returns the driver data associated with the first match for the UID
+ * of the device in the device driver's match table, or %NULL if no such match
+ * could be found.
+ */
+const void *ssam_device_get_match_data(const struct ssam_device *dev)
+{
+	const struct ssam_device_id *id;
+
+	id = ssam_device_get_match(dev);
+	if (!id)
+		return NULL;
+
+	return (const void *)id->driver_data;
+}
+EXPORT_SYMBOL_GPL(ssam_device_get_match_data);
+
+static int ssam_bus_match(struct device *dev, struct device_driver *drv)
+{
+	struct ssam_device_driver *sdrv = to_ssam_device_driver(drv);
+	struct ssam_device *sdev = to_ssam_device(dev);
+
+	if (!is_ssam_device(dev))
+		return 0;
+
+	return !!ssam_device_id_match(sdrv->match_table, sdev->uid);
+}
+
+static int ssam_bus_probe(struct device *dev)
+{
+	return to_ssam_device_driver(dev->driver)
+		->probe(to_ssam_device(dev));
+}
+
+static void ssam_bus_remove(struct device *dev)
+{
+	struct ssam_device_driver *sdrv = to_ssam_device_driver(dev->driver);
+
+	if (sdrv->remove)
+		sdrv->remove(to_ssam_device(dev));
+}
+
+struct bus_type ssam_bus_type = {
+	.name   = "surface_aggregator",
+	.match  = ssam_bus_match,
+	.probe  = ssam_bus_probe,
+	.remove = ssam_bus_remove,
+};
+EXPORT_SYMBOL_GPL(ssam_bus_type);
+
+/**
+ * __ssam_device_driver_register() - Register a SSAM client device driver.
+ * @sdrv:  The driver to register.
+ * @owner: The module owning the provided driver.
+ *
+ * Please refer to the ssam_device_driver_register() macro for the normal way
+ * to register a driver from inside its owning module.
+ */
+int __ssam_device_driver_register(struct ssam_device_driver *sdrv,
+				  struct module *owner)
+{
+	sdrv->driver.owner = owner;
+	sdrv->driver.bus = &ssam_bus_type;
+
+	/* force drivers to async probe so I/O is possible in probe */
+	sdrv->driver.probe_type = PROBE_PREFER_ASYNCHRONOUS;
+
+	return driver_register(&sdrv->driver);
+}
+EXPORT_SYMBOL_GPL(__ssam_device_driver_register);
+
+/**
+ * ssam_device_driver_unregister - Unregister a SSAM device driver.
+ * @sdrv: The driver to unregister.
+ */
+void ssam_device_driver_unregister(struct ssam_device_driver *sdrv)
+{
+	driver_unregister(&sdrv->driver);
+}
+EXPORT_SYMBOL_GPL(ssam_device_driver_unregister);
+
+
+/* -- Bus registration. ----------------------------------------------------- */
+
+/**
+ * ssam_bus_register() - Register and set-up the SSAM client device bus.
+ */
+int ssam_bus_register(void)
+{
+	return bus_register(&ssam_bus_type);
+}
+
+/**
+ * ssam_bus_unregister() - Unregister the SSAM client device bus.
+ */
+void ssam_bus_unregister(void)
+{
+	return bus_unregister(&ssam_bus_type);
+}
+
+
+/* -- Helpers for controller and hub devices. ------------------------------- */
+
+static int ssam_device_uid_from_string(const char *str, struct ssam_device_uid *uid)
+{
+	u8 d, tc, tid, iid, fn;
+	int n;
+
+	n = sscanf(str, "%hhx:%hhx:%hhx:%hhx:%hhx", &d, &tc, &tid, &iid, &fn);
+	if (n != 5)
+		return -EINVAL;
+
+	uid->domain = d;
+	uid->category = tc;
+	uid->target = tid;
+	uid->instance = iid;
+	uid->function = fn;
+
+	return 0;
+}
+
+static int ssam_get_uid_for_node(struct fwnode_handle *node, struct ssam_device_uid *uid)
+{
+	const char *str = fwnode_get_name(node);
+
+	/*
+	 * To simplify definitions of firmware nodes, we set the device name
+	 * based on the UID of the device, prefixed with "ssam:".
+	 */
+	if (strncmp(str, "ssam:", strlen("ssam:")) != 0)
+		return -ENODEV;
+
+	str += strlen("ssam:");
+	return ssam_device_uid_from_string(str, uid);
+}
+
+static int ssam_add_client_device(struct device *parent, struct ssam_controller *ctrl,
+				  struct fwnode_handle *node)
+{
+	struct ssam_device_uid uid;
+	struct ssam_device *sdev;
+	int status;
+
+	status = ssam_get_uid_for_node(node, &uid);
+	if (status)
+		return status;
+
+	sdev = ssam_device_alloc(ctrl, uid);
+	if (!sdev)
+		return -ENOMEM;
+
+	sdev->dev.parent = parent;
+	sdev->dev.fwnode = fwnode_handle_get(node);
+
+	status = ssam_device_add(sdev);
+	if (status)
+		ssam_device_put(sdev);
+
+	return status;
+}
+
+/**
+ * __ssam_register_clients() - Register client devices defined under the
+ * given firmware node as children of the given device.
+ * @parent: The parent device under which clients should be registered.
+ * @ctrl: The controller with which client should be registered.
+ * @node: The firmware node holding definitions of the devices to be added.
+ *
+ * Register all clients that have been defined as children of the given root
+ * firmware node as children of the given parent device. The respective child
+ * firmware nodes will be associated with the correspondingly created child
+ * devices.
+ *
+ * The given controller will be used to instantiate the new devices. See
+ * ssam_device_add() for details.
+ *
+ * Note that, generally, the use of either ssam_device_register_clients() or
+ * ssam_register_clients() should be preferred as they directly use the
+ * firmware node and/or controller associated with the given device. This
+ * function is only intended for use when different device specifications (e.g.
+ * ACPI and firmware nodes) need to be combined (as is done in the platform hub
+ * of the device registry).
+ *
+ * Return: Returns zero on success, nonzero on failure.
+ */
+int __ssam_register_clients(struct device *parent, struct ssam_controller *ctrl,
+			    struct fwnode_handle *node)
+{
+	struct fwnode_handle *child;
+	int status;
+
+	fwnode_for_each_child_node(node, child) {
+		/*
+		 * Try to add the device specified in the firmware node. If
+		 * this fails with -ENODEV, the node does not specify any SSAM
+		 * device, so ignore it and continue with the next one.
+		 */
+		status = ssam_add_client_device(parent, ctrl, child);
+		if (status && status != -ENODEV)
+			goto err;
+	}
+
+	return 0;
+err:
+	ssam_remove_clients(parent);
+	return status;
+}
+EXPORT_SYMBOL_GPL(__ssam_register_clients);
+
+static int ssam_remove_device(struct device *dev, void *_data)
+{
+	struct ssam_device *sdev = to_ssam_device(dev);
+
+	if (is_ssam_device(dev))
+		ssam_device_remove(sdev);
+
+	return 0;
+}
+
+/**
+ * ssam_remove_clients() - Remove SSAM client devices registered as direct
+ * children under the given parent device.
+ * @dev: The (parent) device to remove all direct clients for.
+ *
+ * Remove all SSAM client devices registered as direct children under the given
+ * device. Note that this only accounts for direct children of the device.
+ * Refer to ssam_device_add()/ssam_device_remove() for more details.
+ */
+void ssam_remove_clients(struct device *dev)
+{
+	device_for_each_child_reverse(dev, NULL, ssam_remove_device);
+}
+EXPORT_SYMBOL_GPL(ssam_remove_clients);