Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 400 insertions, 0 deletions

diff --git a/drivers/power/supply/gpio-charger.c b/drivers/power/supply/gpio-charger.c
new file mode 100644
index 000000000..68212b397
--- /dev/null
+++ b/drivers/power/supply/gpio-charger.c
@@ -0,0 +1,400 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
+ *  Driver for chargers which report their online status through a GPIO pin
+ */
+
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/gpio/consumer.h>
+
+#include <linux/power/gpio-charger.h>
+
+struct gpio_mapping {
+	u32 limit_ua;
+	u32 gpiodata;
+} __packed;
+
+struct gpio_charger {
+	struct device *dev;
+	unsigned int irq;
+	unsigned int charge_status_irq;
+	bool wakeup_enabled;
+
+	struct power_supply *charger;
+	struct power_supply_desc charger_desc;
+	struct gpio_desc *gpiod;
+	struct gpio_desc *charge_status;
+
+	struct gpio_descs *current_limit_gpios;
+	struct gpio_mapping *current_limit_map;
+	u32 current_limit_map_size;
+	u32 charge_current_limit;
+};
+
+static irqreturn_t gpio_charger_irq(int irq, void *devid)
+{
+	struct power_supply *charger = devid;
+
+	power_supply_changed(charger);
+
+	return IRQ_HANDLED;
+}
+
+static inline struct gpio_charger *psy_to_gpio_charger(struct power_supply *psy)
+{
+	return power_supply_get_drvdata(psy);
+}
+
+static int set_charge_current_limit(struct gpio_charger *gpio_charger, int val)
+{
+	struct gpio_mapping mapping;
+	int ndescs = gpio_charger->current_limit_gpios->ndescs;
+	struct gpio_desc **gpios = gpio_charger->current_limit_gpios->desc;
+	int i;
+
+	if (!gpio_charger->current_limit_map_size)
+		return -EINVAL;
+
+	for (i = 0; i < gpio_charger->current_limit_map_size; i++) {
+		if (gpio_charger->current_limit_map[i].limit_ua <= val)
+			break;
+	}
+	mapping = gpio_charger->current_limit_map[i];
+
+	for (i = 0; i < ndescs; i++) {
+		bool val = (mapping.gpiodata >> i) & 1;
+		gpiod_set_value_cansleep(gpios[ndescs-i-1], val);
+	}
+
+	gpio_charger->charge_current_limit = mapping.limit_ua;
+
+	dev_dbg(gpio_charger->dev, "set charge current limit to %d (requested: %d)\n",
+		gpio_charger->charge_current_limit, val);
+
+	return 0;
+}
+
+static int gpio_charger_get_property(struct power_supply *psy,
+		enum power_supply_property psp, union power_supply_propval *val)
+{
+	struct gpio_charger *gpio_charger = psy_to_gpio_charger(psy);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval = gpiod_get_value_cansleep(gpio_charger->gpiod);
+		break;
+	case POWER_SUPPLY_PROP_STATUS:
+		if (gpiod_get_value_cansleep(gpio_charger->charge_status))
+			val->intval = POWER_SUPPLY_STATUS_CHARGING;
+		else
+			val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+		break;
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
+		val->intval = gpio_charger->charge_current_limit;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int gpio_charger_set_property(struct power_supply *psy,
+	enum power_supply_property psp, const union power_supply_propval *val)
+{
+	struct gpio_charger *gpio_charger = psy_to_gpio_charger(psy);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
+		return set_charge_current_limit(gpio_charger, val->intval);
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int gpio_charger_property_is_writeable(struct power_supply *psy,
+					      enum power_supply_property psp)
+{
+	switch (psp) {
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
+		return 1;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+static enum power_supply_type gpio_charger_get_type(struct device *dev)
+{
+	const char *chargetype;
+
+	if (!device_property_read_string(dev, "charger-type", &chargetype)) {
+		if (!strcmp("unknown", chargetype))
+			return POWER_SUPPLY_TYPE_UNKNOWN;
+		if (!strcmp("battery", chargetype))
+			return POWER_SUPPLY_TYPE_BATTERY;
+		if (!strcmp("ups", chargetype))
+			return POWER_SUPPLY_TYPE_UPS;
+		if (!strcmp("mains", chargetype))
+			return POWER_SUPPLY_TYPE_MAINS;
+		if (!strcmp("usb-sdp", chargetype))
+			return POWER_SUPPLY_TYPE_USB;
+		if (!strcmp("usb-dcp", chargetype))
+			return POWER_SUPPLY_TYPE_USB;
+		if (!strcmp("usb-cdp", chargetype))
+			return POWER_SUPPLY_TYPE_USB;
+		if (!strcmp("usb-aca", chargetype))
+			return POWER_SUPPLY_TYPE_USB;
+	}
+	dev_warn(dev, "unknown charger type %s\n", chargetype);
+
+	return POWER_SUPPLY_TYPE_UNKNOWN;
+}
+
+static int gpio_charger_get_irq(struct device *dev, void *dev_id,
+				struct gpio_desc *gpio)
+{
+	int ret, irq = gpiod_to_irq(gpio);
+
+	if (irq > 0) {
+		ret = devm_request_any_context_irq(dev, irq, gpio_charger_irq,
+						   IRQF_TRIGGER_RISING |
+						   IRQF_TRIGGER_FALLING,
+						   dev_name(dev),
+						   dev_id);
+		if (ret < 0) {
+			dev_warn(dev, "Failed to request irq: %d\n", ret);
+			irq = 0;
+		}
+	}
+
+	return irq;
+}
+
+static int init_charge_current_limit(struct device *dev,
+				    struct gpio_charger *gpio_charger)
+{
+	int i, len;
+	u32 cur_limit = U32_MAX;
+
+	gpio_charger->current_limit_gpios = devm_gpiod_get_array_optional(dev,
+		"charge-current-limit", GPIOD_OUT_LOW);
+	if (IS_ERR(gpio_charger->current_limit_gpios)) {
+		dev_err(dev, "error getting current-limit GPIOs\n");
+		return PTR_ERR(gpio_charger->current_limit_gpios);
+	}
+
+	if (!gpio_charger->current_limit_gpios)
+		return 0;
+
+	len = device_property_read_u32_array(dev, "charge-current-limit-mapping",
+		NULL, 0);
+	if (len < 0)
+		return len;
+
+	if (len == 0 || len % 2) {
+		dev_err(dev, "invalid charge-current-limit-mapping length\n");
+		return -EINVAL;
+	}
+
+	gpio_charger->current_limit_map = devm_kmalloc_array(dev,
+		len / 2, sizeof(*gpio_charger->current_limit_map), GFP_KERNEL);
+	if (!gpio_charger->current_limit_map)
+		return -ENOMEM;
+
+	gpio_charger->current_limit_map_size = len / 2;
+
+	len = device_property_read_u32_array(dev, "charge-current-limit-mapping",
+		(u32*) gpio_charger->current_limit_map, len);
+	if (len < 0)
+		return len;
+
+	for (i=0; i < gpio_charger->current_limit_map_size; i++) {
+		if (gpio_charger->current_limit_map[i].limit_ua > cur_limit) {
+			dev_err(dev, "charge-current-limit-mapping not sorted by current in descending order\n");
+			return -EINVAL;
+		}
+
+		cur_limit = gpio_charger->current_limit_map[i].limit_ua;
+	}
+
+	/* default to smallest current limitation for safety reasons */
+	len = gpio_charger->current_limit_map_size - 1;
+	set_charge_current_limit(gpio_charger,
+		gpio_charger->current_limit_map[len].limit_ua);
+
+	return 0;
+}
+
+/*
+ * The entries will be overwritten by driver's probe routine depending
+ * on the available features. This list ensures, that the array is big
+ * enough for all optional features.
+ */
+static enum power_supply_property gpio_charger_properties[] = {
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
+};
+
+static int gpio_charger_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	const struct gpio_charger_platform_data *pdata = dev->platform_data;
+	struct power_supply_config psy_cfg = {};
+	struct gpio_charger *gpio_charger;
+	struct power_supply_desc *charger_desc;
+	struct gpio_desc *charge_status;
+	int charge_status_irq;
+	int ret;
+	int num_props = 0;
+
+	if (!pdata && !dev->of_node) {
+		dev_err(dev, "No platform data\n");
+		return -ENOENT;
+	}
+
+	gpio_charger = devm_kzalloc(dev, sizeof(*gpio_charger), GFP_KERNEL);
+	if (!gpio_charger)
+		return -ENOMEM;
+	gpio_charger->dev = dev;
+
+	/*
+	 * This will fetch a GPIO descriptor from device tree, ACPI or
+	 * boardfile descriptor tables. It's good to try this first.
+	 */
+	gpio_charger->gpiod = devm_gpiod_get_optional(dev, NULL, GPIOD_IN);
+	if (IS_ERR(gpio_charger->gpiod)) {
+		/* Just try again if this happens */
+		return dev_err_probe(dev, PTR_ERR(gpio_charger->gpiod),
+				     "error getting GPIO descriptor\n");
+	}
+
+	if (gpio_charger->gpiod) {
+		gpio_charger_properties[num_props] = POWER_SUPPLY_PROP_ONLINE;
+		num_props++;
+	}
+
+	charge_status = devm_gpiod_get_optional(dev, "charge-status", GPIOD_IN);
+	if (IS_ERR(charge_status))
+		return PTR_ERR(charge_status);
+	if (charge_status) {
+		gpio_charger->charge_status = charge_status;
+		gpio_charger_properties[num_props] = POWER_SUPPLY_PROP_STATUS;
+		num_props++;
+	}
+
+	ret = init_charge_current_limit(dev, gpio_charger);
+	if (ret < 0)
+		return ret;
+	if (gpio_charger->current_limit_map) {
+		gpio_charger_properties[num_props] =
+			POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX;
+		num_props++;
+	}
+
+	charger_desc = &gpio_charger->charger_desc;
+	charger_desc->properties = gpio_charger_properties;
+	charger_desc->num_properties = num_props;
+	charger_desc->get_property = gpio_charger_get_property;
+	charger_desc->set_property = gpio_charger_set_property;
+	charger_desc->property_is_writeable =
+					gpio_charger_property_is_writeable;
+
+	psy_cfg.of_node = dev->of_node;
+	psy_cfg.drv_data = gpio_charger;
+
+	if (pdata) {
+		charger_desc->name = pdata->name;
+		charger_desc->type = pdata->type;
+		psy_cfg.supplied_to = pdata->supplied_to;
+		psy_cfg.num_supplicants = pdata->num_supplicants;
+	} else {
+		charger_desc->name = dev->of_node->name;
+		charger_desc->type = gpio_charger_get_type(dev);
+	}
+
+	if (!charger_desc->name)
+		charger_desc->name = pdev->name;
+
+	gpio_charger->charger = devm_power_supply_register(dev, charger_desc,
+							   &psy_cfg);
+	if (IS_ERR(gpio_charger->charger)) {
+		ret = PTR_ERR(gpio_charger->charger);
+		dev_err(dev, "Failed to register power supply: %d\n", ret);
+		return ret;
+	}
+
+	gpio_charger->irq = gpio_charger_get_irq(dev, gpio_charger->charger,
+						 gpio_charger->gpiod);
+
+	charge_status_irq = gpio_charger_get_irq(dev, gpio_charger->charger,
+						 gpio_charger->charge_status);
+	gpio_charger->charge_status_irq = charge_status_irq;
+
+	platform_set_drvdata(pdev, gpio_charger);
+
+	device_init_wakeup(dev, 1);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int gpio_charger_suspend(struct device *dev)
+{
+	struct gpio_charger *gpio_charger = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev))
+		gpio_charger->wakeup_enabled =
+			!enable_irq_wake(gpio_charger->irq);
+
+	return 0;
+}
+
+static int gpio_charger_resume(struct device *dev)
+{
+	struct gpio_charger *gpio_charger = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev) && gpio_charger->wakeup_enabled)
+		disable_irq_wake(gpio_charger->irq);
+	power_supply_changed(gpio_charger->charger);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(gpio_charger_pm_ops,
+		gpio_charger_suspend, gpio_charger_resume);
+
+static const struct of_device_id gpio_charger_match[] = {
+	{ .compatible = "gpio-charger" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, gpio_charger_match);
+
+static struct platform_driver gpio_charger_driver = {
+	.probe = gpio_charger_probe,
+	.driver = {
+		.name = "gpio-charger",
+		.pm = &gpio_charger_pm_ops,
+		.of_match_table = gpio_charger_match,
+	},
+};
+
+module_platform_driver(gpio_charger_driver);
+
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
+MODULE_DESCRIPTION("Driver for chargers only communicating via GPIO(s)");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:gpio-charger");