Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 396 insertions, 0 deletions

diff --git a/drivers/regulator/max8907-regulator.c b/drivers/regulator/max8907-regulator.c
new file mode 100644
index 000000000..1a6fd68f3
--- /dev/null
+++ b/drivers/regulator/max8907-regulator.c
@@ -0,0 +1,396 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * max8907-regulator.c -- support regulators in max8907
+ *
+ * Copyright (C) 2010 Gyungoh Yoo <jack.yoo@maxim-ic.com>
+ * Copyright (C) 2010-2012, NVIDIA CORPORATION. All rights reserved.
+ *
+ * Portions based on drivers/regulator/tps65910-regulator.c,
+ *     Copyright 2010 Texas Instruments Inc.
+ *     Author: Graeme Gregory <gg@slimlogic.co.uk>
+ *     Author: Jorge Eduardo Candelaria <jedu@slimlogic.co.uk>
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/max8907.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#define MAX8907_II2RR_VERSION_MASK	0xF0
+#define MAX8907_II2RR_VERSION_REV_A	0x00
+#define MAX8907_II2RR_VERSION_REV_B	0x10
+#define MAX8907_II2RR_VERSION_REV_C	0x30
+
+struct max8907_regulator {
+	struct regulator_desc desc[MAX8907_NUM_REGULATORS];
+};
+
+#define REG_MBATT() \
+	[MAX8907_MBATT] = { \
+		.name = "MBATT", \
+		.supply_name = "mbatt", \
+		.id = MAX8907_MBATT, \
+		.ops = &max8907_mbatt_ops, \
+		.type = REGULATOR_VOLTAGE, \
+		.owner = THIS_MODULE, \
+	}
+
+#define REG_LDO(ids, supply, base, min, max, step) \
+	[MAX8907_##ids] = { \
+		.name = #ids, \
+		.supply_name = supply, \
+		.id = MAX8907_##ids, \
+		.n_voltages = ((max) - (min)) / (step) + 1, \
+		.ops = &max8907_ldo_ops, \
+		.type = REGULATOR_VOLTAGE, \
+		.owner = THIS_MODULE, \
+		.min_uV = (min), \
+		.uV_step = (step), \
+		.vsel_reg = (base) + MAX8907_VOUT, \
+		.vsel_mask = 0x3f, \
+		.enable_reg = (base) + MAX8907_CTL, \
+		.enable_mask = MAX8907_MASK_LDO_EN, \
+	}
+
+#define REG_FIXED(ids, supply, voltage) \
+	[MAX8907_##ids] = { \
+		.name = #ids, \
+		.supply_name = supply, \
+		.id = MAX8907_##ids, \
+		.n_voltages = 1, \
+		.ops = &max8907_fixed_ops, \
+		.type = REGULATOR_VOLTAGE, \
+		.owner = THIS_MODULE, \
+		.min_uV = (voltage), \
+	}
+
+#define REG_OUT5V(ids, supply, base, voltage) \
+	[MAX8907_##ids] = { \
+		.name = #ids, \
+		.supply_name = supply, \
+		.id = MAX8907_##ids, \
+		.n_voltages = 1, \
+		.ops = &max8907_out5v_ops, \
+		.type = REGULATOR_VOLTAGE, \
+		.owner = THIS_MODULE, \
+		.min_uV = (voltage), \
+		.enable_reg = (base), \
+		.enable_mask = MAX8907_MASK_OUT5V_EN, \
+	}
+
+#define REG_BBAT(ids, supply, base, min, max, step) \
+	[MAX8907_##ids] = { \
+		.name = #ids, \
+		.supply_name = supply, \
+		.id = MAX8907_##ids, \
+		.n_voltages = ((max) - (min)) / (step) + 1, \
+		.ops = &max8907_bbat_ops, \
+		.type = REGULATOR_VOLTAGE, \
+		.owner = THIS_MODULE, \
+		.min_uV = (min), \
+		.uV_step = (step), \
+		.vsel_reg = (base), \
+		.vsel_mask = MAX8907_MASK_VBBATTCV, \
+	}
+
+#define LDO_750_50(id, supply, base) REG_LDO(id, supply, (base), \
+			750000, 3900000, 50000)
+#define LDO_650_25(id, supply, base) REG_LDO(id, supply, (base), \
+			650000, 2225000, 25000)
+
+static const struct regulator_ops max8907_mbatt_ops = {
+};
+
+static const struct regulator_ops max8907_ldo_ops = {
+	.list_voltage = regulator_list_voltage_linear,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+};
+
+static const struct regulator_ops max8907_ldo_hwctl_ops = {
+	.list_voltage = regulator_list_voltage_linear,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+};
+
+static const struct regulator_ops max8907_fixed_ops = {
+	.list_voltage = regulator_list_voltage_linear,
+};
+
+static const struct regulator_ops max8907_out5v_ops = {
+	.list_voltage = regulator_list_voltage_linear,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+};
+
+static const struct regulator_ops max8907_out5v_hwctl_ops = {
+	.list_voltage = regulator_list_voltage_linear,
+};
+
+static const struct regulator_ops max8907_bbat_ops = {
+	.list_voltage = regulator_list_voltage_linear,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+};
+
+static const struct regulator_desc max8907_regulators[] = {
+	REG_MBATT(),
+	REG_LDO(SD1, "in-v1", MAX8907_REG_SDCTL1, 650000, 2225000, 25000),
+	REG_LDO(SD2, "in-v2", MAX8907_REG_SDCTL2, 637500, 1425000, 12500),
+	REG_LDO(SD3, "in-v3", MAX8907_REG_SDCTL3, 750000, 3900000, 50000),
+	LDO_750_50(LDO1, "in1", MAX8907_REG_LDOCTL1),
+	LDO_650_25(LDO2, "in2", MAX8907_REG_LDOCTL2),
+	LDO_650_25(LDO3, "in3", MAX8907_REG_LDOCTL3),
+	LDO_750_50(LDO4, "in4", MAX8907_REG_LDOCTL4),
+	LDO_750_50(LDO5, "in5", MAX8907_REG_LDOCTL5),
+	LDO_750_50(LDO6, "in6", MAX8907_REG_LDOCTL6),
+	LDO_750_50(LDO7, "in7", MAX8907_REG_LDOCTL7),
+	LDO_750_50(LDO8, "in8", MAX8907_REG_LDOCTL8),
+	LDO_750_50(LDO9, "in9", MAX8907_REG_LDOCTL9),
+	LDO_750_50(LDO10, "in10", MAX8907_REG_LDOCTL10),
+	LDO_750_50(LDO11, "in11", MAX8907_REG_LDOCTL11),
+	LDO_750_50(LDO12, "in12", MAX8907_REG_LDOCTL12),
+	LDO_750_50(LDO13, "in13", MAX8907_REG_LDOCTL13),
+	LDO_750_50(LDO14, "in14", MAX8907_REG_LDOCTL14),
+	LDO_750_50(LDO15, "in15", MAX8907_REG_LDOCTL15),
+	LDO_750_50(LDO16, "in16", MAX8907_REG_LDOCTL16),
+	LDO_650_25(LDO17, "in17", MAX8907_REG_LDOCTL17),
+	LDO_650_25(LDO18, "in18", MAX8907_REG_LDOCTL18),
+	LDO_750_50(LDO19, "in19", MAX8907_REG_LDOCTL19),
+	LDO_750_50(LDO20, "in20", MAX8907_REG_LDOCTL20),
+	REG_OUT5V(OUT5V, "mbatt", MAX8907_REG_OUT5VEN, 5000000),
+	REG_OUT5V(OUT33V, "mbatt",  MAX8907_REG_OUT33VEN, 3300000),
+	REG_BBAT(BBAT, "MBATT", MAX8907_REG_BBAT_CNFG,
+						2400000, 3000000, 200000),
+	REG_FIXED(SDBY, "MBATT", 1200000),
+	REG_FIXED(VRTC, "MBATT", 3300000),
+};
+
+#ifdef CONFIG_OF
+
+#define MATCH(_name, _id) \
+	[MAX8907_##_id] = { \
+		.name = #_name, \
+		.driver_data = (void *)&max8907_regulators[MAX8907_##_id], \
+	}
+
+static struct of_regulator_match max8907_matches[] = {
+	MATCH(mbatt, MBATT),
+	MATCH(sd1, SD1),
+	MATCH(sd2, SD2),
+	MATCH(sd3, SD3),
+	MATCH(ldo1, LDO1),
+	MATCH(ldo2, LDO2),
+	MATCH(ldo3, LDO3),
+	MATCH(ldo4, LDO4),
+	MATCH(ldo5, LDO5),
+	MATCH(ldo6, LDO6),
+	MATCH(ldo7, LDO7),
+	MATCH(ldo8, LDO8),
+	MATCH(ldo9, LDO9),
+	MATCH(ldo10, LDO10),
+	MATCH(ldo11, LDO11),
+	MATCH(ldo12, LDO12),
+	MATCH(ldo13, LDO13),
+	MATCH(ldo14, LDO14),
+	MATCH(ldo15, LDO15),
+	MATCH(ldo16, LDO16),
+	MATCH(ldo17, LDO17),
+	MATCH(ldo18, LDO18),
+	MATCH(ldo19, LDO19),
+	MATCH(ldo20, LDO20),
+	MATCH(out5v, OUT5V),
+	MATCH(out33v, OUT33V),
+	MATCH(bbat, BBAT),
+	MATCH(sdby, SDBY),
+	MATCH(vrtc, VRTC),
+};
+
+static int max8907_regulator_parse_dt(struct platform_device *pdev)
+{
+	struct device_node *np, *regulators;
+	int ret;
+
+	np = pdev->dev.parent->of_node;
+	if (!np)
+		return 0;
+
+	regulators = of_get_child_by_name(np, "regulators");
+	if (!regulators) {
+		dev_err(&pdev->dev, "regulators node not found\n");
+		return -EINVAL;
+	}
+
+	ret = of_regulator_match(&pdev->dev, regulators, max8907_matches,
+				 ARRAY_SIZE(max8907_matches));
+	of_node_put(regulators);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Error parsing regulator init data: %d\n",
+			ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static inline struct regulator_init_data *match_init_data(int index)
+{
+	return max8907_matches[index].init_data;
+}
+
+static inline struct device_node *match_of_node(int index)
+{
+	return max8907_matches[index].of_node;
+}
+#else
+static int max8907_regulator_parse_dt(struct platform_device *pdev)
+{
+	return 0;
+}
+
+static inline struct regulator_init_data *match_init_data(int index)
+{
+	return NULL;
+}
+
+static inline struct device_node *match_of_node(int index)
+{
+	return NULL;
+}
+#endif
+
+static int max8907_regulator_probe(struct platform_device *pdev)
+{
+	struct max8907 *max8907 = dev_get_drvdata(pdev->dev.parent);
+	struct max8907_platform_data *pdata = dev_get_platdata(max8907->dev);
+	int ret;
+	struct max8907_regulator *pmic;
+	unsigned int val;
+	int i;
+	struct regulator_config config = {};
+	struct regulator_init_data *idata;
+	const char *mbatt_rail_name = NULL;
+
+	ret = max8907_regulator_parse_dt(pdev);
+	if (ret)
+		return ret;
+
+	pmic = devm_kzalloc(&pdev->dev, sizeof(*pmic), GFP_KERNEL);
+	if (!pmic)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, pmic);
+
+	memcpy(pmic->desc, max8907_regulators, sizeof(pmic->desc));
+
+	/* Backwards compatibility with MAX8907B; SD1 uses different voltages */
+	ret = regmap_read(max8907->regmap_gen, MAX8907_REG_II2RR, &val);
+	if (ret)
+		return ret;
+
+	if ((val & MAX8907_II2RR_VERSION_MASK) ==
+	    MAX8907_II2RR_VERSION_REV_B) {
+		pmic->desc[MAX8907_SD1].min_uV = 637500;
+		pmic->desc[MAX8907_SD1].uV_step = 12500;
+		pmic->desc[MAX8907_SD1].n_voltages =
+						(1425000 - 637500) / 12500 + 1;
+	}
+
+	for (i = 0; i < MAX8907_NUM_REGULATORS; i++) {
+		struct regulator_dev *rdev;
+
+		config.dev = pdev->dev.parent;
+		if (pdata)
+			idata = pdata->init_data[i];
+		else
+			idata = match_init_data(i);
+		config.init_data = idata;
+		config.driver_data = pmic;
+		config.regmap = max8907->regmap_gen;
+		config.of_node = match_of_node(i);
+
+		switch (pmic->desc[i].id) {
+		case MAX8907_MBATT:
+			if (idata && idata->constraints.name)
+				mbatt_rail_name = idata->constraints.name;
+			else
+				mbatt_rail_name = pmic->desc[i].name;
+			break;
+		case MAX8907_BBAT:
+		case MAX8907_SDBY:
+		case MAX8907_VRTC:
+			idata->supply_regulator = mbatt_rail_name;
+			break;
+		}
+
+		if (pmic->desc[i].ops == &max8907_ldo_ops) {
+			ret = regmap_read(config.regmap, pmic->desc[i].enable_reg,
+				    &val);
+			if (ret)
+				return ret;
+
+			if ((val & MAX8907_MASK_LDO_SEQ) !=
+			    MAX8907_MASK_LDO_SEQ)
+				pmic->desc[i].ops = &max8907_ldo_hwctl_ops;
+		} else if (pmic->desc[i].ops == &max8907_out5v_ops) {
+			ret = regmap_read(config.regmap, pmic->desc[i].enable_reg,
+				    &val);
+			if (ret)
+				return ret;
+
+			if ((val & (MAX8907_MASK_OUT5V_VINEN |
+						MAX8907_MASK_OUT5V_ENSRC)) !=
+			    MAX8907_MASK_OUT5V_ENSRC)
+				pmic->desc[i].ops = &max8907_out5v_hwctl_ops;
+		}
+
+		rdev = devm_regulator_register(&pdev->dev,
+						&pmic->desc[i], &config);
+		if (IS_ERR(rdev)) {
+			dev_err(&pdev->dev,
+				"failed to register %s regulator\n",
+				pmic->desc[i].name);
+			return PTR_ERR(rdev);
+		}
+	}
+
+	return 0;
+}
+
+static struct platform_driver max8907_regulator_driver = {
+	.driver = {
+		   .name = "max8907-regulator",
+		   },
+	.probe = max8907_regulator_probe,
+};
+
+static int __init max8907_regulator_init(void)
+{
+	return platform_driver_register(&max8907_regulator_driver);
+}
+
+subsys_initcall(max8907_regulator_init);
+
+static void __exit max8907_reg_exit(void)
+{
+	platform_driver_unregister(&max8907_regulator_driver);
+}
+
+module_exit(max8907_reg_exit);
+
+MODULE_DESCRIPTION("MAX8907 regulator driver");
+MODULE_AUTHOR("Gyungoh Yoo <jack.yoo@maxim-ic.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:max8907-regulator");