Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 545 insertions, 0 deletions

diff --git a/drivers/scsi/device_handler/scsi_dh_emc.c b/drivers/scsi/device_handler/scsi_dh_emc.c
new file mode 100644
index 000000000..2e21ab447
--- /dev/null
+++ b/drivers/scsi/device_handler/scsi_dh_emc.c
@@ -0,0 +1,545 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Target driver for EMC CLARiiON AX/CX-series hardware.
+ * Based on code from Lars Marowsky-Bree <lmb@suse.de>
+ * and Ed Goggin <egoggin@emc.com>.
+ *
+ * Copyright (C) 2006 Red Hat, Inc.  All rights reserved.
+ * Copyright (C) 2006 Mike Christie
+ */
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <scsi/scsi.h>
+#include <scsi/scsi_eh.h>
+#include <scsi/scsi_dh.h>
+#include <scsi/scsi_device.h>
+
+#define CLARIION_NAME			"emc"
+
+#define CLARIION_TRESPASS_PAGE		0x22
+#define CLARIION_BUFFER_SIZE		0xFC
+#define CLARIION_TIMEOUT		(60 * HZ)
+#define CLARIION_RETRIES		3
+#define CLARIION_UNBOUND_LU		-1
+#define CLARIION_SP_A			0
+#define CLARIION_SP_B			1
+
+/* Flags */
+#define CLARIION_SHORT_TRESPASS		1
+#define CLARIION_HONOR_RESERVATIONS	2
+
+/* LUN states */
+#define CLARIION_LUN_UNINITIALIZED	-1
+#define CLARIION_LUN_UNBOUND		0
+#define CLARIION_LUN_BOUND		1
+#define CLARIION_LUN_OWNED		2
+
+static unsigned char long_trespass[] = {
+	0, 0, 0, 0, 0, 0, 0, 0,
+	CLARIION_TRESPASS_PAGE,	/* Page code */
+	0x09,			/* Page length - 2 */
+	0x01,			/* Trespass code */
+	0xff, 0xff,		/* Trespass target */
+	0, 0, 0, 0, 0, 0	/* Reserved bytes / unknown */
+};
+
+static unsigned char short_trespass[] = {
+	0, 0, 0, 0,
+	CLARIION_TRESPASS_PAGE,	/* Page code */
+	0x02,			/* Page length - 2 */
+	0x01,			/* Trespass code */
+	0xff,			/* Trespass target */
+};
+
+static const char * lun_state[] =
+{
+    "not bound",
+    "bound",
+    "owned",
+};
+
+struct clariion_dh_data {
+	/*
+	 * Flags:
+	 *  CLARIION_SHORT_TRESPASS
+	 * Use short trespass command (FC-series) or the long version
+	 * (default for AX/CX CLARiiON arrays).
+	 *
+	 *  CLARIION_HONOR_RESERVATIONS
+	 * Whether or not (default) to honor SCSI reservations when
+	 * initiating a switch-over.
+	 */
+	unsigned flags;
+	/*
+	 * I/O buffer for both MODE_SELECT and INQUIRY commands.
+	 */
+	unsigned char buffer[CLARIION_BUFFER_SIZE];
+	/*
+	 * LUN state
+	 */
+	int lun_state;
+	/*
+	 * SP Port number
+	 */
+	int port;
+	/*
+	 * which SP (A=0,B=1,UNBOUND=-1) is the default SP for this
+	 * path's mapped LUN
+	 */
+	int default_sp;
+	/*
+	 * which SP (A=0,B=1,UNBOUND=-1) is the active SP for this
+	 * path's mapped LUN
+	 */
+	int current_sp;
+};
+
+/*
+ * Parse MODE_SELECT cmd reply.
+ */
+static int trespass_endio(struct scsi_device *sdev,
+			  struct scsi_sense_hdr *sshdr)
+{
+	int err = SCSI_DH_IO;
+
+	sdev_printk(KERN_ERR, sdev, "%s: Found valid sense data 0x%2x, "
+		    "0x%2x, 0x%2x while sending CLARiiON trespass "
+		    "command.\n", CLARIION_NAME, sshdr->sense_key,
+		    sshdr->asc, sshdr->ascq);
+
+	if (sshdr->sense_key == 0x05 && sshdr->asc == 0x04 &&
+	    sshdr->ascq == 0x00) {
+		/*
+		 * Array based copy in progress -- do not send
+		 * mode_select or copy will be aborted mid-stream.
+		 */
+		sdev_printk(KERN_INFO, sdev, "%s: Array Based Copy in "
+			    "progress while sending CLARiiON trespass "
+			    "command.\n", CLARIION_NAME);
+		err = SCSI_DH_DEV_TEMP_BUSY;
+	} else if (sshdr->sense_key == 0x02 && sshdr->asc == 0x04 &&
+		   sshdr->ascq == 0x03) {
+		/*
+		 * LUN Not Ready - Manual Intervention Required
+		 * indicates in-progress ucode upgrade (NDU).
+		 */
+		sdev_printk(KERN_INFO, sdev, "%s: Detected in-progress "
+			    "ucode upgrade NDU operation while sending "
+			    "CLARiiON trespass command.\n", CLARIION_NAME);
+		err = SCSI_DH_DEV_TEMP_BUSY;
+	} else
+		err = SCSI_DH_DEV_FAILED;
+	return err;
+}
+
+static int parse_sp_info_reply(struct scsi_device *sdev,
+			       struct clariion_dh_data *csdev)
+{
+	int err = SCSI_DH_OK;
+
+	/* check for in-progress ucode upgrade (NDU) */
+	if (csdev->buffer[48] != 0) {
+		sdev_printk(KERN_NOTICE, sdev, "%s: Detected in-progress "
+			    "ucode upgrade NDU operation while finding "
+			    "current active SP.", CLARIION_NAME);
+		err = SCSI_DH_DEV_TEMP_BUSY;
+		goto out;
+	}
+	if (csdev->buffer[4] > 2) {
+		/* Invalid buffer format */
+		sdev_printk(KERN_NOTICE, sdev,
+			    "%s: invalid VPD page 0xC0 format\n",
+			    CLARIION_NAME);
+		err = SCSI_DH_NOSYS;
+		goto out;
+	}
+	switch (csdev->buffer[28] & 0x0f) {
+	case 6:
+		sdev_printk(KERN_NOTICE, sdev,
+			    "%s: ALUA failover mode detected\n",
+			    CLARIION_NAME);
+		break;
+	case 4:
+		/* Linux failover */
+		break;
+	default:
+		sdev_printk(KERN_WARNING, sdev,
+			    "%s: Invalid failover mode %d\n",
+			    CLARIION_NAME, csdev->buffer[28] & 0x0f);
+		err = SCSI_DH_NOSYS;
+		goto out;
+	}
+
+	csdev->default_sp = csdev->buffer[5];
+	csdev->lun_state = csdev->buffer[4];
+	csdev->current_sp = csdev->buffer[8];
+	csdev->port = csdev->buffer[7];
+	if (csdev->lun_state == CLARIION_LUN_OWNED)
+		sdev->access_state = SCSI_ACCESS_STATE_OPTIMAL;
+	else
+		sdev->access_state = SCSI_ACCESS_STATE_STANDBY;
+	if (csdev->default_sp == csdev->current_sp)
+		sdev->access_state |= SCSI_ACCESS_STATE_PREFERRED;
+out:
+	return err;
+}
+
+#define emc_default_str "FC (Legacy)"
+
+static char * parse_sp_model(struct scsi_device *sdev, unsigned char *buffer)
+{
+	unsigned char len = buffer[4] + 5;
+	char *sp_model = NULL;
+	unsigned char sp_len, serial_len;
+
+	if (len < 160) {
+		sdev_printk(KERN_WARNING, sdev,
+			    "%s: Invalid information section length %d\n",
+			    CLARIION_NAME, len);
+		/* Check for old FC arrays */
+		if (!strncmp(buffer + 8, "DGC", 3)) {
+			/* Old FC array, not supporting extended information */
+			sp_model = emc_default_str;
+		}
+		goto out;
+	}
+
+	/*
+	 * Parse extended information for SP model number
+	 */
+	serial_len = buffer[160];
+	if (serial_len == 0 || serial_len + 161 > len) {
+		sdev_printk(KERN_WARNING, sdev,
+			    "%s: Invalid array serial number length %d\n",
+			    CLARIION_NAME, serial_len);
+		goto out;
+	}
+	sp_len = buffer[99];
+	if (sp_len == 0 || serial_len + sp_len + 161 > len) {
+		sdev_printk(KERN_WARNING, sdev,
+			    "%s: Invalid model number length %d\n",
+			    CLARIION_NAME, sp_len);
+		goto out;
+	}
+	sp_model = &buffer[serial_len + 161];
+	/* Strip whitespace at the end */
+	while (sp_len > 1 && sp_model[sp_len - 1] == ' ')
+		sp_len--;
+
+	sp_model[sp_len] = '\0';
+
+out:
+	return sp_model;
+}
+
+static int send_trespass_cmd(struct scsi_device *sdev,
+			    struct clariion_dh_data *csdev)
+{
+	unsigned char *page22;
+	unsigned char cdb[MAX_COMMAND_SIZE];
+	int err, res = SCSI_DH_OK, len;
+	struct scsi_sense_hdr sshdr;
+	blk_opf_t req_flags = REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT |
+		REQ_FAILFAST_DRIVER;
+
+	if (csdev->flags & CLARIION_SHORT_TRESPASS) {
+		page22 = short_trespass;
+		if (!(csdev->flags & CLARIION_HONOR_RESERVATIONS))
+			/* Set Honor Reservations bit */
+			page22[6] |= 0x80;
+		len = sizeof(short_trespass);
+		cdb[0] = MODE_SELECT;
+		cdb[1] = 0x10;
+		cdb[4] = len;
+	} else {
+		page22 = long_trespass;
+		if (!(csdev->flags & CLARIION_HONOR_RESERVATIONS))
+			/* Set Honor Reservations bit */
+			page22[10] |= 0x80;
+		len = sizeof(long_trespass);
+		cdb[0] = MODE_SELECT_10;
+		cdb[8] = len;
+	}
+	BUG_ON((len > CLARIION_BUFFER_SIZE));
+	memcpy(csdev->buffer, page22, len);
+
+	err = scsi_execute(sdev, cdb, DMA_TO_DEVICE, csdev->buffer, len, NULL,
+			&sshdr, CLARIION_TIMEOUT * HZ, CLARIION_RETRIES,
+			req_flags, 0, NULL);
+	if (err) {
+		if (scsi_sense_valid(&sshdr))
+			res = trespass_endio(sdev, &sshdr);
+		else {
+			sdev_printk(KERN_INFO, sdev,
+				    "%s: failed to send MODE SELECT: %x\n",
+				    CLARIION_NAME, err);
+			res = SCSI_DH_IO;
+		}
+	}
+
+	return res;
+}
+
+static enum scsi_disposition clariion_check_sense(struct scsi_device *sdev,
+					struct scsi_sense_hdr *sense_hdr)
+{
+	switch (sense_hdr->sense_key) {
+	case NOT_READY:
+		if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x03)
+			/*
+			 * LUN Not Ready - Manual Intervention Required
+			 * indicates this is a passive path.
+			 *
+			 * FIXME: However, if this is seen and EVPD C0
+			 * indicates that this is due to a NDU in
+			 * progress, we should set FAIL_PATH too.
+			 * This indicates we might have to do a SCSI
+			 * inquiry in the end_io path. Ugh.
+			 *
+			 * Can return FAILED only when we want the error
+			 * recovery process to kick in.
+			 */
+			return SUCCESS;
+		break;
+	case ILLEGAL_REQUEST:
+		if (sense_hdr->asc == 0x25 && sense_hdr->ascq == 0x01)
+			/*
+			 * An array based copy is in progress. Do not
+			 * fail the path, do not bypass to another PG,
+			 * do not retry. Fail the IO immediately.
+			 * (Actually this is the same conclusion as in
+			 * the default handler, but lets make sure.)
+			 *
+			 * Can return FAILED only when we want the error
+			 * recovery process to kick in.
+			 */
+			return SUCCESS;
+		break;
+	case UNIT_ATTENTION:
+		if (sense_hdr->asc == 0x29 && sense_hdr->ascq == 0x00)
+			/*
+			 * Unit Attention Code. This is the first IO
+			 * to the new path, so just retry.
+			 */
+			return ADD_TO_MLQUEUE;
+		break;
+	}
+
+	return SCSI_RETURN_NOT_HANDLED;
+}
+
+static blk_status_t clariion_prep_fn(struct scsi_device *sdev,
+		struct request *req)
+{
+	struct clariion_dh_data *h = sdev->handler_data;
+
+	if (h->lun_state != CLARIION_LUN_OWNED) {
+		req->rq_flags |= RQF_QUIET;
+		return BLK_STS_IOERR;
+	}
+
+	return BLK_STS_OK;
+}
+
+static int clariion_std_inquiry(struct scsi_device *sdev,
+				struct clariion_dh_data *csdev)
+{
+	int err = SCSI_DH_OK;
+	char *sp_model;
+
+	sp_model = parse_sp_model(sdev, sdev->inquiry);
+	if (!sp_model) {
+		err = SCSI_DH_DEV_UNSUPP;
+		goto out;
+	}
+
+	/*
+	 * FC Series arrays do not support long trespass
+	 */
+	if (!strlen(sp_model) || !strncmp(sp_model, "FC",2))
+		csdev->flags |= CLARIION_SHORT_TRESPASS;
+
+	sdev_printk(KERN_INFO, sdev,
+		    "%s: detected Clariion %s, flags %x\n",
+		    CLARIION_NAME, sp_model, csdev->flags);
+out:
+	return err;
+}
+
+static int clariion_send_inquiry(struct scsi_device *sdev,
+				 struct clariion_dh_data *csdev)
+{
+	int err = SCSI_DH_IO;
+
+	if (!scsi_get_vpd_page(sdev, 0xC0, csdev->buffer,
+			       CLARIION_BUFFER_SIZE))
+		err = parse_sp_info_reply(sdev, csdev);
+
+	return err;
+}
+
+static int clariion_activate(struct scsi_device *sdev,
+				activate_complete fn, void *data)
+{
+	struct clariion_dh_data *csdev = sdev->handler_data;
+	int result;
+
+	result = clariion_send_inquiry(sdev, csdev);
+	if (result != SCSI_DH_OK)
+		goto done;
+
+	if (csdev->lun_state == CLARIION_LUN_OWNED)
+		goto done;
+
+	result = send_trespass_cmd(sdev, csdev);
+	if (result != SCSI_DH_OK)
+		goto done;
+	sdev_printk(KERN_INFO, sdev,"%s: %s trespass command sent\n",
+		    CLARIION_NAME,
+		    csdev->flags&CLARIION_SHORT_TRESPASS?"short":"long" );
+
+	/* Update status */
+	result = clariion_send_inquiry(sdev, csdev);
+	if (result != SCSI_DH_OK)
+		goto done;
+
+done:
+	sdev_printk(KERN_INFO, sdev,
+		    "%s: at SP %c Port %d (%s, default SP %c)\n",
+		    CLARIION_NAME, csdev->current_sp + 'A',
+		    csdev->port, lun_state[csdev->lun_state],
+		    csdev->default_sp + 'A');
+
+	if (fn)
+		fn(data, result);
+	return 0;
+}
+/*
+ * params - parameters in the following format
+ *      "no_of_params\0param1\0param2\0param3\0...\0"
+ *      for example, string for 2 parameters with value 10 and 21
+ *      is specified as "2\010\021\0".
+ */
+static int clariion_set_params(struct scsi_device *sdev, const char *params)
+{
+	struct clariion_dh_data *csdev = sdev->handler_data;
+	unsigned int hr = 0, st = 0, argc;
+	const char *p = params;
+	int result = SCSI_DH_OK;
+
+	if ((sscanf(params, "%u", &argc) != 1) || (argc != 2))
+		return -EINVAL;
+
+	while (*p++)
+		;
+	if ((sscanf(p, "%u", &st) != 1) || (st > 1))
+		return -EINVAL;
+
+	while (*p++)
+		;
+	if ((sscanf(p, "%u", &hr) != 1) || (hr > 1))
+		return -EINVAL;
+
+	if (st)
+		csdev->flags |= CLARIION_SHORT_TRESPASS;
+	else
+		csdev->flags &= ~CLARIION_SHORT_TRESPASS;
+
+	if (hr)
+		csdev->flags |= CLARIION_HONOR_RESERVATIONS;
+	else
+		csdev->flags &= ~CLARIION_HONOR_RESERVATIONS;
+
+	/*
+	 * If this path is owned, we have to send a trespass command
+	 * with the new parameters. If not, simply return. Next trespass
+	 * command would use the parameters.
+	 */
+	if (csdev->lun_state != CLARIION_LUN_OWNED)
+		goto done;
+
+	csdev->lun_state = CLARIION_LUN_UNINITIALIZED;
+	result = send_trespass_cmd(sdev, csdev);
+	if (result != SCSI_DH_OK)
+		goto done;
+
+	/* Update status */
+	result = clariion_send_inquiry(sdev, csdev);
+
+done:
+	return result;
+}
+
+static int clariion_bus_attach(struct scsi_device *sdev)
+{
+	struct clariion_dh_data *h;
+	int err;
+
+	h = kzalloc(sizeof(*h) , GFP_KERNEL);
+	if (!h)
+		return SCSI_DH_NOMEM;
+	h->lun_state = CLARIION_LUN_UNINITIALIZED;
+	h->default_sp = CLARIION_UNBOUND_LU;
+	h->current_sp = CLARIION_UNBOUND_LU;
+
+	err = clariion_std_inquiry(sdev, h);
+	if (err != SCSI_DH_OK)
+		goto failed;
+
+	err = clariion_send_inquiry(sdev, h);
+	if (err != SCSI_DH_OK)
+		goto failed;
+
+	sdev_printk(KERN_INFO, sdev,
+		    "%s: connected to SP %c Port %d (%s, default SP %c)\n",
+		    CLARIION_NAME, h->current_sp + 'A',
+		    h->port, lun_state[h->lun_state],
+		    h->default_sp + 'A');
+
+	sdev->handler_data = h;
+	return SCSI_DH_OK;
+
+failed:
+	kfree(h);
+	return err;
+}
+
+static void clariion_bus_detach(struct scsi_device *sdev)
+{
+	kfree(sdev->handler_data);
+	sdev->handler_data = NULL;
+}
+
+static struct scsi_device_handler clariion_dh = {
+	.name		= CLARIION_NAME,
+	.module		= THIS_MODULE,
+	.attach		= clariion_bus_attach,
+	.detach		= clariion_bus_detach,
+	.check_sense	= clariion_check_sense,
+	.activate	= clariion_activate,
+	.prep_fn	= clariion_prep_fn,
+	.set_params	= clariion_set_params,
+};
+
+static int __init clariion_init(void)
+{
+	int r;
+
+	r = scsi_register_device_handler(&clariion_dh);
+	if (r != 0)
+		printk(KERN_ERR "%s: Failed to register scsi device handler.",
+			CLARIION_NAME);
+	return r;
+}
+
+static void __exit clariion_exit(void)
+{
+	scsi_unregister_device_handler(&clariion_dh);
+}
+
+module_init(clariion_init);
+module_exit(clariion_exit);
+
+MODULE_DESCRIPTION("EMC CX/AX/FC-family driver");
+MODULE_AUTHOR("Mike Christie <michaelc@cs.wisc.edu>, Chandra Seetharaman <sekharan@us.ibm.com>");
+MODULE_LICENSE("GPL");