Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 114 insertions, 0 deletions

diff --git a/drivers/scsi/fdomain.h b/drivers/scsi/fdomain.h
new file mode 100644
index 000000000..93afcee20
--- /dev/null
+++ b/drivers/scsi/fdomain.h
@@ -0,0 +1,114 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#define FDOMAIN_REGION_SIZE	0x10
+#define FDOMAIN_BIOS_SIZE	0x2000
+
+enum {
+	in_arbitration	= 0x02,
+	in_selection	= 0x04,
+	in_other	= 0x08,
+	disconnect	= 0x10,
+	aborted		= 0x20,
+	sent_ident	= 0x40,
+};
+
+/* (@) = not present on TMC1800, (#) = not present on TMC1800 and TMC18C50 */
+#define REG_SCSI_DATA		0	/* R/W: SCSI Data (with ACK) */
+#define REG_BSTAT		1	/* R: SCSI Bus Status */
+#define		BSTAT_BSY	BIT(0)	 /* Busy */
+#define		BSTAT_MSG	BIT(1)	 /* Message */
+#define		BSTAT_IO	BIT(2)	 /* Input/Output */
+#define		BSTAT_CMD	BIT(3)	 /* Command/Data */
+#define		BSTAT_REQ	BIT(4)	 /* Request and Not Ack */
+#define		BSTAT_SEL	BIT(5)	 /* Select */
+#define		BSTAT_ACK	BIT(6)	 /* Acknowledge and Request */
+#define		BSTAT_ATN	BIT(7)	 /* Attention */
+#define REG_BCTL		1	/* W: SCSI Bus Control */
+#define		BCTL_RST	BIT(0)	 /* Bus Reset */
+#define		BCTL_SEL	BIT(1)	 /* Select */
+#define		BCTL_BSY	BIT(2)	 /* Busy */
+#define		BCTL_ATN	BIT(3)	 /* Attention */
+#define		BCTL_IO		BIT(4)	 /* Input/Output */
+#define		BCTL_CMD	BIT(5)	 /* Command/Data */
+#define		BCTL_MSG	BIT(6)	 /* Message */
+#define		BCTL_BUSEN	BIT(7)	 /* Enable bus drivers */
+#define REG_ASTAT		2	/* R: Adapter Status 1 */
+#define		ASTAT_IRQ	BIT(0)	 /* Interrupt active */
+#define		ASTAT_ARB	BIT(1)	 /* Arbitration complete */
+#define		ASTAT_PARERR	BIT(2)	 /* Parity error */
+#define		ASTAT_RST	BIT(3)	 /* SCSI reset occurred */
+#define		ASTAT_FIFODIR	BIT(4)	 /* FIFO direction */
+#define		ASTAT_FIFOEN	BIT(5)	 /* FIFO enabled */
+#define		ASTAT_PAREN	BIT(6)	 /* Parity enabled */
+#define		ASTAT_BUSEN	BIT(7)	 /* Bus drivers enabled */
+#define REG_ICTL		2	/* W: Interrupt Control */
+#define		ICTL_FIFO_MASK	0x0f	 /* FIFO threshold, 1/16 FIFO size */
+#define		ICTL_FIFO	BIT(4)	 /* Int. on FIFO count */
+#define		ICTL_ARB	BIT(5)	 /* Int. on Arbitration complete */
+#define		ICTL_SEL	BIT(6)	 /* Int. on SCSI Select */
+#define		ICTL_REQ	BIT(7)	 /* Int. on SCSI Request */
+#define REG_FSTAT		3	/* R: Adapter Status 2 (FIFO) - (@) */
+#define		FSTAT_ONOTEMPTY	BIT(0)	 /* Output FIFO not empty */
+#define		FSTAT_INOTEMPTY	BIT(1)	 /* Input FIFO not empty */
+#define		FSTAT_NOTEMPTY	BIT(2)	 /* Main FIFO not empty */
+#define		FSTAT_NOTFULL	BIT(3)	 /* Main FIFO not full */
+#define REG_MCTL		3	/* W: SCSI Data Mode Control */
+#define		MCTL_ACK_MASK	0x0f	 /* Acknowledge period */
+#define		MCTL_ACTDEASS	BIT(4)	 /* Active deassert of REQ and ACK */
+#define		MCTL_TARGET	BIT(5)	 /* Enable target mode */
+#define		MCTL_FASTSYNC	BIT(6)	 /* Enable Fast Synchronous */
+#define		MCTL_SYNC	BIT(7)	 /* Enable Synchronous */
+#define REG_INTCOND		4	/* R: Interrupt Condition - (@) */
+#define		IRQ_FIFO	BIT(1)	 /* FIFO interrupt */
+#define		IRQ_REQ		BIT(2)	 /* SCSI Request interrupt */
+#define		IRQ_SEL		BIT(3)	 /* SCSI Select interrupt */
+#define		IRQ_ARB		BIT(4)	 /* SCSI Arbitration interrupt */
+#define		IRQ_RST		BIT(5)	 /* SCSI Reset interrupt */
+#define		IRQ_FORCED	BIT(6)	 /* Forced interrupt */
+#define		IRQ_TIMEOUT	BIT(7)	 /* Bus timeout */
+#define REG_ACTL		4	/* W: Adapter Control 1 */
+#define		ACTL_RESET	BIT(0)	 /* Reset FIFO, parity, reset int. */
+#define		ACTL_FIRQ	BIT(1)	 /* Set Forced interrupt */
+#define		ACTL_ARB	BIT(2)	 /* Initiate Bus Arbitration */
+#define		ACTL_PAREN	BIT(3)	 /* Enable SCSI Parity */
+#define		ACTL_IRQEN	BIT(4)	 /* Enable interrupts */
+#define		ACTL_CLRFIRQ	BIT(5)	 /* Clear Forced interrupt */
+#define		ACTL_FIFOWR	BIT(6)	 /* FIFO Direction (1=write) */
+#define		ACTL_FIFOEN	BIT(7)	 /* Enable FIFO */
+#define REG_ID_LSB		5	/* R: ID Code (LSB) */
+#define REG_ACTL2		5	/* Adapter Control 2 - (@) */
+#define		ACTL2_RAMOVRLY	BIT(0)	 /* Enable RAM overlay */
+#define		ACTL2_SLEEP	BIT(7)	 /* Sleep mode */
+#define REG_ID_MSB		6	/* R: ID Code (MSB) */
+#define REG_LOOPBACK		7	/* R/W: Loopback */
+#define REG_SCSI_DATA_NOACK	8	/* R/W: SCSI Data (no ACK) */
+#define REG_ASTAT3		9	/* R: Adapter Status 3 */
+#define		ASTAT3_ACTDEASS	BIT(0)	 /* Active deassert enabled */
+#define		ASTAT3_RAMOVRLY	BIT(1)	 /* RAM overlay enabled */
+#define		ASTAT3_TARGERR	BIT(2)	 /* Target error */
+#define		ASTAT3_IRQEN	BIT(3)	 /* Interrupts enabled */
+#define		ASTAT3_IRQMASK	0xf0	 /* Enabled interrupts mask */
+#define REG_CFG1		10	/* R: Configuration Register 1 */
+#define		CFG1_BUS	BIT(0)	 /* 0 = ISA */
+#define		CFG1_IRQ_MASK	0x0e	 /* IRQ jumpers */
+#define		CFG1_IO_MASK	0x30	 /* I/O base jumpers */
+#define		CFG1_BIOS_MASK	0xc0	 /* BIOS base jumpers */
+#define REG_CFG2		11	/* R/W: Configuration Register 2 (@) */
+#define		CFG2_ROMDIS	BIT(0)	 /* ROM disabled */
+#define		CFG2_RAMDIS	BIT(1)	 /* RAM disabled */
+#define		CFG2_IRQEDGE	BIT(2)	 /* Edge-triggered interrupts */
+#define		CFG2_NOWS	BIT(3)	 /* No wait states */
+#define		CFG2_32BIT	BIT(7)	 /* 32-bit mode */
+#define REG_FIFO		12	/* R/W: FIFO */
+#define REG_FIFO_COUNT		14	/* R: FIFO Data Count */
+
+#ifdef CONFIG_PM_SLEEP
+static const struct dev_pm_ops __maybe_unused fdomain_pm_ops;
+#define FDOMAIN_PM_OPS	(&fdomain_pm_ops)
+#else
+#define FDOMAIN_PM_OPS	NULL
+#endif /* CONFIG_PM_SLEEP */
+
+struct Scsi_Host *fdomain_create(int base, int irq, int this_id,
+				 struct device *dev);
+int fdomain_destroy(struct Scsi_Host *sh);