Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 248 insertions, 0 deletions

diff --git a/drivers/scsi/wd719x.h b/drivers/scsi/wd719x.h
new file mode 100644
index 000000000..966ab0fb4
--- /dev/null
+++ b/drivers/scsi/wd719x.h
@@ -0,0 +1,248 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _WD719X_H_
+#define _WD719X_H_
+
+#define WD719X_SG 255		/* Scatter/gather size */
+
+struct wd719x_sglist {
+	__le32 ptr;
+	__le32 length;
+} __packed;
+
+enum wd719x_card_type {
+	WD719X_TYPE_UNKNOWN = 0,
+	WD719X_TYPE_7193,
+	WD719X_TYPE_7197,
+	WD719X_TYPE_7296,
+};
+
+union wd719x_regs {
+	__le32 all;	/* All Status at once */
+	struct {
+		u8 OPC;		/* Opcode register */
+		u8 SCSI;	/* SCSI Errors */
+		u8 SUE;		/* Spider unique Errors */
+		u8 INT;		/* Interrupt Status */
+	} bytes;
+};
+
+/* Spider Command Block (SCB) */
+struct wd719x_scb {
+	__le32 Int_SCB;	/* 00-03 Internal SCB link pointer (must be cleared) */
+	u8 SCB_opcode;	/* 04 SCB Command opcode */
+	u8 CDB_tag;	/* 05 SCSI Tag byte for CDB queues (0 if untagged) */
+	u8 lun;		/* 06 SCSI LUN */
+	u8 devid;	/* 07 SCSI Device ID */
+	u8 CDB[16];	/* 08-23 SCSI CDB (16 bytes as defined by ANSI spec. */
+	__le32 data_p;	/* 24-27 Data transfer address (or SG list address) */
+	__le32 data_length; /* 28-31 Data transfer Length (or SG list length) */
+	__le32 CDB_link;    /* 32-35 SCSI CDB Link Ptr */
+	__le32 sense_buf;   /* 36-39 Auto request sense buffer address */
+	u8 sense_buf_length;/* 40 Auto request sense transfer length */
+	u8 reserved;	/* 41 reserved */
+	u8 SCB_options;	/* 42 SCB-options */
+	u8 SCB_tag_msg;	/* 43 Tagged messages options */
+	/* Not filled in by host */
+	__le32 req_ptr;	/* 44-47 Ptr to Host Request returned on interrupt */
+	u8 host_opcode;	/* 48 Host Command Opcode (same as AMR_00) */
+	u8 scsi_stat;	/* 49 SCSI Status returned */
+	u8 ret_error;	/* 50 SPIDER Unique Error Code returned (SUE) */
+	u8 int_stat;	/* 51 Message u8 / Interrupt Status byte returned */
+	__le32 transferred; /* 52-55 Bytes Transferred */
+	u8 last_trans[3];  /* 56-58 Bytes Transferred in last session */
+	u8 length;	/* 59 SCSI Messages Length (1-8) */
+	u8 sync_offset;	/* 60 Synchronous offset */
+	u8 sync_rate;	/* 61 Synchronous rate */
+	u8 flags[2];	/* 62-63 SCB specific flags (local to each thread) */
+	/* everything below is for driver use (not used by card) */
+	dma_addr_t phys;	/* bus address of the SCB */
+	dma_addr_t dma_handle;
+	struct scsi_cmnd *cmd;	/* a copy of the pointer we were passed */
+	struct list_head list;
+	struct wd719x_sglist sg_list[WD719X_SG] __aligned(8); /* SG list */
+} __packed;
+
+struct wd719x {
+	struct Scsi_Host *sh;	/* pointer to host structure */
+	struct pci_dev *pdev;
+	void __iomem *base;
+	enum wd719x_card_type type; /* type of card */
+	void *fw_virt;		/* firmware buffer CPU address */
+	dma_addr_t fw_phys;	/* firmware buffer bus address */
+	size_t fw_size;		/* firmware buffer size */
+	struct wd719x_host_param *params; /* host parameters (EEPROM) */
+	dma_addr_t params_phys; /* host parameters bus address */
+	void *hash_virt;	/* hash table CPU address */
+	dma_addr_t hash_phys;	/* hash table bus address */
+	struct list_head active_scbs;
+};
+
+/* timeout delays in microsecs */
+#define WD719X_WAIT_FOR_CMD_READY	500
+#define WD719X_WAIT_FOR_RISC		2000
+#define WD719X_WAIT_FOR_SCSI_RESET	3000000
+
+/* All commands except 0x00 generate an interrupt */
+#define WD719X_CMD_READY	0x00 /* Command register ready (or noop) */
+#define WD719X_CMD_INIT_RISC	0x01 /* Initialize RISC */
+/* 0x02 is reserved */
+#define WD719X_CMD_BUSRESET	0x03 /* Assert SCSI bus reset */
+#define WD719X_CMD_READ_FIRMVER	0x04 /* Read the Firmware Revision */
+#define WD719X_CMD_ECHO_BYTES	0x05 /* Echo command bytes (DW) */
+/* 0x06 is reserved */
+/* 0x07 is reserved */
+#define WD719X_CMD_GET_PARAM	0x08 /* Get programmable parameters */
+#define WD719X_CMD_SET_PARAM	0x09 /* Set programmable parameters */
+#define WD719X_CMD_SLEEP	0x0a /* Put SPIDER to sleep */
+#define WD719X_CMD_READ_INIT	0x0b /* Read initialization parameters */
+#define WD719X_CMD_RESTORE_INIT	0x0c /* Restore initialization parameters */
+/* 0x0d is reserved */
+/* 0x0e is reserved */
+/* 0x0f is reserved */
+#define WD719X_CMD_ABORT_TAG	0x10 /* Send Abort tag message to target */
+#define WD719X_CMD_ABORT	0x11 /* Send Abort message to target */
+#define WD719X_CMD_RESET	0x12 /* Send Reset message to target */
+#define WD719X_CMD_INIT_SCAM	0x13 /* Initiate SCAM */
+#define WD719X_CMD_GET_SYNC	0x14 /* Get synchronous rates */
+#define WD719X_CMD_SET_SYNC	0x15 /* Set synchronous rates */
+#define WD719X_CMD_GET_WIDTH	0x16 /* Get SCSI bus width */
+#define WD719X_CMD_SET_WIDTH	0x17 /* Set SCSI bus width */
+#define WD719X_CMD_GET_TAGS	0x18 /* Get tag flags */
+#define WD719X_CMD_SET_TAGS	0x19 /* Set tag flags */
+#define WD719X_CMD_GET_PARAM2	0x1a /* Get programmable params (format 2) */
+#define WD719X_CMD_SET_PARAM2	0x1b /* Set programmable params (format 2) */
+/* Commands with request pointers (mailbox) */
+#define WD719X_CMD_PROCESS_SCB	0x80 /* Process SCSI Control Block (SCB) */
+/* No interrupt generated on acceptance of SCB pointer */
+
+/* interrupt status defines */
+#define WD719X_INT_NONE		0x00 /* No interrupt pending */
+#define WD719X_INT_NOERRORS	0x01 /* Command completed with no errors */
+#define WD719X_INT_LINKNOERRORS	0x02 /* link cmd completed with no errors */
+#define WD719X_INT_LINKNOSTATUS	0x03 /* link cmd completed with no flag set */
+#define WD719X_INT_ERRORSLOGGED	0x04 /* cmd completed with errors logged */
+#define WD719X_INT_SPIDERFAILED	0x05 /* cmd failed without valid SCSI status */
+#define WD719X_INT_BADINT	0x80 /* unsolicited interrupt */
+#define WD719X_INT_PIOREADY	0xf0 /* data ready for PIO output */
+
+/* Spider Unique Error Codes (SUE) */
+#define WD719X_SUE_NOERRORS	0x00 /* No errors detected by SPIDER */
+#define WD719X_SUE_REJECTED	0x01 /* Command Rejected (bad opcode/param) */
+#define WD719X_SUE_SCBQFULL	0x02 /* SCB queue full */
+/* 0x03 is reserved */
+#define WD719X_SUE_TERM		0x04 /* Host terminated SCB via primative cmd */
+#define WD719X_SUE_CHAN1PAR	0x05 /* PCI Channel 1 parity error occurred */
+#define WD719X_SUE_CHAN1ABORT	0x06 /* PCI Channel 1 system abort occurred */
+#define WD719X_SUE_CHAN23PAR	0x07 /* PCI Channel 2/3 parity error occurred */
+#define WD719X_SUE_CHAN23ABORT	0x08 /* PCI Channel 2/3 system abort occurred */
+#define WD719X_SUE_TIMEOUT	0x10 /* Selection/reselection timeout */
+#define WD719X_SUE_RESET	0x11 /* SCSI bus reset occurred */
+#define WD719X_SUE_BUSERROR	0x12 /* SCSI bus error */
+#define WD719X_SUE_WRONGWAY	0x13 /* Wrong data transfer dir set by target */
+#define WD719X_SUE_BADPHASE	0x14 /* SCSI phase illegal or unexpected */
+#define WD719X_SUE_TOOLONG	0x15 /* target requested too much data */
+#define WD719X_SUE_BUSFREE	0x16 /* Unexpected SCSI bus free */
+#define WD719X_SUE_ARSDONE	0x17 /* Auto request sense executed */
+#define WD719X_SUE_IGNORED	0x18 /* SCSI message was ignored by target */
+#define WD719X_SUE_WRONGTAGS	0x19 /* Tagged SCB & tags off (or vice versa) */
+#define WD719X_SUE_BADTAGS	0x1a /* Wrong tag message type for target */
+#define WD719X_SUE_NOSCAMID	0x1b /* No SCAM soft ID available */
+
+/* code sizes */
+#define	WD719X_HASH_TABLE_SIZE	4096
+
+/* Advanced Mode Registers */
+/* Regs 0x00..0x1f are for Advanced Mode of the card (RISC is running). */
+#define WD719X_AMR_COMMAND		0x00
+#define WD719X_AMR_CMD_PARAM		0x01
+#define WD719X_AMR_CMD_PARAM_2		0x02
+#define WD719X_AMR_CMD_PARAM_3		0x03
+#define WD719X_AMR_SCB_IN		0x04
+
+#define WD719X_AMR_BIOS_SHARE_INT	0x0f
+
+#define WD719X_AMR_SCB_OUT		0x18
+#define WD719X_AMR_OP_CODE		0x1c
+#define WD719X_AMR_SCSI_STATUS		0x1d
+#define WD719X_AMR_SCB_ERROR		0x1e
+#define WD719X_AMR_INT_STATUS		0x1f
+
+#define WD719X_DISABLE_INT	0x80
+
+/* SCB flags */
+#define WD719X_SCB_FLAGS_CHECK_DIRECTION	0x01
+#define WD719X_SCB_FLAGS_PCI_TO_SCSI		0x02
+#define WD719X_SCB_FLAGS_AUTO_REQUEST_SENSE	0x10
+#define WD719X_SCB_FLAGS_DO_SCATTER_GATHER	0x20
+#define WD719X_SCB_FLAGS_NO_DISCONNECT		0x40
+
+/* PCI Registers used for reset, initial code download */
+/* Regs 0x20..0x3f are for Normal (DOS) mode (RISC is asleep). */
+#define WD719X_PCI_GPIO_CONTROL		0x3C
+#define WD719X_PCI_GPIO_DATA		0x3D
+#define WD719X_PCI_PORT_RESET		0x3E
+#define WD719X_PCI_MODE_SELECT		0x3F
+
+#define WD719X_PCI_EXTERNAL_ADDR	0x60
+#define WD719X_PCI_INTERNAL_ADDR	0x64
+#define WD719X_PCI_DMA_TRANSFER_SIZE	0x66
+#define WD719X_PCI_CHANNEL2_3CMD	0x68
+#define WD719X_PCI_CHANNEL2_3STATUS	0x69
+
+#define WD719X_GPIO_ID_BITS		0x0a
+#define WD719X_PRAM_BASE_ADDR		0x00
+
+/* codes written to or read from the card */
+#define WD719X_PCI_RESET		 0x01
+#define WD719X_ENABLE_ADVANCE_MODE	 0x01
+
+#define WD719X_START_CHANNEL2_3DMA	 0x17
+#define WD719X_START_CHANNEL2_3DONE	 0x01
+#define WD719X_START_CHANNEL2_3ABORT	 0x20
+
+/* 33C296 GPIO bits for EEPROM pins */
+#define WD719X_EE_DI	(1 << 1)
+#define WD719X_EE_CS	(1 << 2)
+#define WD719X_EE_CLK	(1 << 3)
+#define WD719X_EE_DO	(1 << 4)
+
+/* EEPROM contents */
+struct wd719x_eeprom_header {
+	u8 sig1;
+	u8 sig2;
+	u8 version;
+	u8 checksum;
+	u8 cfg_offset;
+	u8 cfg_size;
+	u8 setup_offset;
+	u8 setup_size;
+} __packed;
+
+#define WD719X_EE_SIG1		0
+#define WD719X_EE_SIG2		1
+#define WD719X_EE_VERSION	2
+#define WD719X_EE_CHECKSUM	3
+#define WD719X_EE_CFG_OFFSET	4
+#define WD719X_EE_CFG_SIZE	5
+#define WD719X_EE_SETUP_OFFSET	6
+#define WD719X_EE_SETUP_SIZE	7
+
+#define WD719X_EE_SCSI_ID_MASK	0xf
+
+/* SPIDER Host Parameters Block (=EEPROM configuration block) */
+struct wd719x_host_param {
+	u8 ch_1_th;	/* FIFO threshold */
+	u8 scsi_conf;	/* SCSI configuration */
+	u8 own_scsi_id;	/* controller SCSI ID */
+	u8 sel_timeout;	/* selection timeout*/
+	u8 sleep_timer;	/* seep timer */
+	__le16 cdb_size;/* CDB size groups */
+	__le16 tag_en;	/* Tag msg enables (ID 0-15) */
+	u8 scsi_pad;	/* SCSI pad control */
+	__le32 wide;	/* WIDE msg options (ID 0-15) */
+	__le32 sync;	/* SYNC msg options (ID 0-15) */
+	u8 soft_mask;	/* soft error mask */
+	u8 unsol_mask;	/* unsolicited error mask */
+} __packed;
+
+#endif /* _WD719X_H_ */