Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 418 insertions, 0 deletions

diff --git a/fs/jffs2/compr.c b/fs/jffs2/compr.c
new file mode 100644
index 000000000..4849a4c9a
--- /dev/null
+++ b/fs/jffs2/compr.c
@@ -0,0 +1,418 @@
+/*
+ * JFFS2 -- Journalling Flash File System, Version 2.
+ *
+ * Copyright © 2001-2007 Red Hat, Inc.
+ * Copyright © 2004-2010 David Woodhouse <dwmw2@infradead.org>
+ * Copyright © 2004 Ferenc Havasi <havasi@inf.u-szeged.hu>,
+ *		    University of Szeged, Hungary
+ *
+ * Created by Arjan van de Ven <arjan@infradead.org>
+ *
+ * For licensing information, see the file 'LICENCE' in this directory.
+ *
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include "compr.h"
+
+static DEFINE_SPINLOCK(jffs2_compressor_list_lock);
+
+/* Available compressors are on this list */
+static LIST_HEAD(jffs2_compressor_list);
+
+/* Actual compression mode */
+static int jffs2_compression_mode = JFFS2_COMPR_MODE_PRIORITY;
+
+/* Statistics for blocks stored without compression */
+static uint32_t none_stat_compr_blocks=0,none_stat_decompr_blocks=0,none_stat_compr_size=0;
+
+
+/*
+ * Return 1 to use this compression
+ */
+static int jffs2_is_best_compression(struct jffs2_compressor *this,
+		struct jffs2_compressor *best, uint32_t size, uint32_t bestsize)
+{
+	switch (jffs2_compression_mode) {
+	case JFFS2_COMPR_MODE_SIZE:
+		if (bestsize > size)
+			return 1;
+		return 0;
+	case JFFS2_COMPR_MODE_FAVOURLZO:
+		if ((this->compr == JFFS2_COMPR_LZO) && (bestsize > size))
+			return 1;
+		if ((best->compr != JFFS2_COMPR_LZO) && (bestsize > size))
+			return 1;
+		if ((this->compr == JFFS2_COMPR_LZO) && (bestsize > (size * FAVOUR_LZO_PERCENT / 100)))
+			return 1;
+		if ((bestsize * FAVOUR_LZO_PERCENT / 100) > size)
+			return 1;
+
+		return 0;
+	}
+	/* Shouldn't happen */
+	return 0;
+}
+
+/*
+ * jffs2_selected_compress:
+ * @compr: Explicit compression type to use (ie, JFFS2_COMPR_ZLIB).
+ *	If 0, just take the first available compression mode.
+ * @data_in: Pointer to uncompressed data
+ * @cpage_out: Pointer to returned pointer to buffer for compressed data
+ * @datalen: On entry, holds the amount of data available for compression.
+ *	On exit, expected to hold the amount of data actually compressed.
+ * @cdatalen: On entry, holds the amount of space available for compressed
+ *	data. On exit, expected to hold the actual size of the compressed
+ *	data.
+ *
+ * Returns: the compression type used.  Zero is used to show that the data
+ * could not be compressed; probably because we couldn't find the requested
+ * compression mode.
+ */
+static int jffs2_selected_compress(u8 compr, unsigned char *data_in,
+		unsigned char **cpage_out, u32 *datalen, u32 *cdatalen)
+{
+	struct jffs2_compressor *this;
+	int err, ret = JFFS2_COMPR_NONE;
+	uint32_t orig_slen, orig_dlen;
+	char *output_buf;
+
+	output_buf = kmalloc(*cdatalen, GFP_KERNEL);
+	if (!output_buf) {
+		pr_warn("No memory for compressor allocation. Compression failed.\n");
+		return ret;
+	}
+	orig_slen = *datalen;
+	orig_dlen = *cdatalen;
+	spin_lock(&jffs2_compressor_list_lock);
+	list_for_each_entry(this, &jffs2_compressor_list, list) {
+		/* Skip decompress-only and disabled modules */
+		if (!this->compress || this->disabled)
+			continue;
+
+		/* Skip if not the desired compression type */
+		if (compr && (compr != this->compr))
+			continue;
+
+		/*
+		 * Either compression type was unspecified, or we found our
+		 * compressor; either way, we're good to go.
+		 */
+		this->usecount++;
+		spin_unlock(&jffs2_compressor_list_lock);
+
+		*datalen  = orig_slen;
+		*cdatalen = orig_dlen;
+		err = this->compress(data_in, output_buf, datalen, cdatalen);
+
+		spin_lock(&jffs2_compressor_list_lock);
+		this->usecount--;
+		if (!err) {
+			/* Success */
+			ret = this->compr;
+			this->stat_compr_blocks++;
+			this->stat_compr_orig_size += *datalen;
+			this->stat_compr_new_size += *cdatalen;
+			break;
+		}
+	}
+	spin_unlock(&jffs2_compressor_list_lock);
+	if (ret == JFFS2_COMPR_NONE)
+		kfree(output_buf);
+	else
+		*cpage_out = output_buf;
+
+	return ret;
+}
+
+/* jffs2_compress:
+ * @data_in: Pointer to uncompressed data
+ * @cpage_out: Pointer to returned pointer to buffer for compressed data
+ * @datalen: On entry, holds the amount of data available for compression.
+ *	On exit, expected to hold the amount of data actually compressed.
+ * @cdatalen: On entry, holds the amount of space available for compressed
+ *	data. On exit, expected to hold the actual size of the compressed
+ *	data.
+ *
+ * Returns: Lower byte to be stored with data indicating compression type used.
+ * Zero is used to show that the data could not be compressed - the
+ * compressed version was actually larger than the original.
+ * Upper byte will be used later. (soon)
+ *
+ * If the cdata buffer isn't large enough to hold all the uncompressed data,
+ * jffs2_compress should compress as much as will fit, and should set
+ * *datalen accordingly to show the amount of data which were compressed.
+ */
+uint16_t jffs2_compress(struct jffs2_sb_info *c, struct jffs2_inode_info *f,
+			unsigned char *data_in, unsigned char **cpage_out,
+			uint32_t *datalen, uint32_t *cdatalen)
+{
+	int ret = JFFS2_COMPR_NONE;
+	int mode, compr_ret;
+	struct jffs2_compressor *this, *best=NULL;
+	unsigned char *output_buf = NULL, *tmp_buf;
+	uint32_t orig_slen, orig_dlen;
+	uint32_t best_slen=0, best_dlen=0;
+
+	if (c->mount_opts.override_compr)
+		mode = c->mount_opts.compr;
+	else
+		mode = jffs2_compression_mode;
+
+	switch (mode) {
+	case JFFS2_COMPR_MODE_NONE:
+		break;
+	case JFFS2_COMPR_MODE_PRIORITY:
+		ret = jffs2_selected_compress(0, data_in, cpage_out, datalen,
+				cdatalen);
+		break;
+	case JFFS2_COMPR_MODE_SIZE:
+	case JFFS2_COMPR_MODE_FAVOURLZO:
+		orig_slen = *datalen;
+		orig_dlen = *cdatalen;
+		spin_lock(&jffs2_compressor_list_lock);
+		list_for_each_entry(this, &jffs2_compressor_list, list) {
+			/* Skip decompress-only backwards-compatibility and disabled modules */
+			if ((!this->compress)||(this->disabled))
+				continue;
+			/* Allocating memory for output buffer if necessary */
+			if ((this->compr_buf_size < orig_slen) && (this->compr_buf)) {
+				spin_unlock(&jffs2_compressor_list_lock);
+				kfree(this->compr_buf);
+				spin_lock(&jffs2_compressor_list_lock);
+				this->compr_buf_size=0;
+				this->compr_buf=NULL;
+			}
+			if (!this->compr_buf) {
+				spin_unlock(&jffs2_compressor_list_lock);
+				tmp_buf = kmalloc(orig_slen, GFP_KERNEL);
+				spin_lock(&jffs2_compressor_list_lock);
+				if (!tmp_buf) {
+					pr_warn("No memory for compressor allocation. (%d bytes)\n",
+						orig_slen);
+					continue;
+				}
+				else {
+					this->compr_buf = tmp_buf;
+					this->compr_buf_size = orig_slen;
+				}
+			}
+			this->usecount++;
+			spin_unlock(&jffs2_compressor_list_lock);
+			*datalen  = orig_slen;
+			*cdatalen = orig_dlen;
+			compr_ret = this->compress(data_in, this->compr_buf, datalen, cdatalen);
+			spin_lock(&jffs2_compressor_list_lock);
+			this->usecount--;
+			if (!compr_ret) {
+				if (((!best_dlen) || jffs2_is_best_compression(this, best, *cdatalen, best_dlen))
+						&& (*cdatalen < *datalen)) {
+					best_dlen = *cdatalen;
+					best_slen = *datalen;
+					best = this;
+				}
+			}
+		}
+		if (best_dlen) {
+			*cdatalen = best_dlen;
+			*datalen  = best_slen;
+			output_buf = best->compr_buf;
+			best->compr_buf = NULL;
+			best->compr_buf_size = 0;
+			best->stat_compr_blocks++;
+			best->stat_compr_orig_size += best_slen;
+			best->stat_compr_new_size  += best_dlen;
+			ret = best->compr;
+			*cpage_out = output_buf;
+		}
+		spin_unlock(&jffs2_compressor_list_lock);
+		break;
+	case JFFS2_COMPR_MODE_FORCELZO:
+		ret = jffs2_selected_compress(JFFS2_COMPR_LZO, data_in,
+				cpage_out, datalen, cdatalen);
+		break;
+	case JFFS2_COMPR_MODE_FORCEZLIB:
+		ret = jffs2_selected_compress(JFFS2_COMPR_ZLIB, data_in,
+				cpage_out, datalen, cdatalen);
+		break;
+	default:
+		pr_err("unknown compression mode\n");
+	}
+
+	if (ret == JFFS2_COMPR_NONE) {
+		*cpage_out = data_in;
+		*datalen = *cdatalen;
+		none_stat_compr_blocks++;
+		none_stat_compr_size += *datalen;
+	}
+	return ret;
+}
+
+int jffs2_decompress(struct jffs2_sb_info *c, struct jffs2_inode_info *f,
+		     uint16_t comprtype, unsigned char *cdata_in,
+		     unsigned char *data_out, uint32_t cdatalen, uint32_t datalen)
+{
+	struct jffs2_compressor *this;
+	int ret;
+
+	/* Older code had a bug where it would write non-zero 'usercompr'
+	   fields. Deal with it. */
+	if ((comprtype & 0xff) <= JFFS2_COMPR_ZLIB)
+		comprtype &= 0xff;
+
+	switch (comprtype & 0xff) {
+	case JFFS2_COMPR_NONE:
+		/* This should be special-cased elsewhere, but we might as well deal with it */
+		memcpy(data_out, cdata_in, datalen);
+		none_stat_decompr_blocks++;
+		break;
+	case JFFS2_COMPR_ZERO:
+		memset(data_out, 0, datalen);
+		break;
+	default:
+		spin_lock(&jffs2_compressor_list_lock);
+		list_for_each_entry(this, &jffs2_compressor_list, list) {
+			if (comprtype == this->compr) {
+				this->usecount++;
+				spin_unlock(&jffs2_compressor_list_lock);
+				ret = this->decompress(cdata_in, data_out, cdatalen, datalen);
+				spin_lock(&jffs2_compressor_list_lock);
+				if (ret) {
+					pr_warn("Decompressor \"%s\" returned %d\n",
+						this->name, ret);
+				}
+				else {
+					this->stat_decompr_blocks++;
+				}
+				this->usecount--;
+				spin_unlock(&jffs2_compressor_list_lock);
+				return ret;
+			}
+		}
+		pr_warn("compression type 0x%02x not available\n", comprtype);
+		spin_unlock(&jffs2_compressor_list_lock);
+		return -EIO;
+	}
+	return 0;
+}
+
+int jffs2_register_compressor(struct jffs2_compressor *comp)
+{
+	struct jffs2_compressor *this;
+
+	if (!comp->name) {
+		pr_warn("NULL compressor name at registering JFFS2 compressor. Failed.\n");
+		return -1;
+	}
+	comp->compr_buf_size=0;
+	comp->compr_buf=NULL;
+	comp->usecount=0;
+	comp->stat_compr_orig_size=0;
+	comp->stat_compr_new_size=0;
+	comp->stat_compr_blocks=0;
+	comp->stat_decompr_blocks=0;
+	jffs2_dbg(1, "Registering JFFS2 compressor \"%s\"\n", comp->name);
+
+	spin_lock(&jffs2_compressor_list_lock);
+
+	list_for_each_entry(this, &jffs2_compressor_list, list) {
+		if (this->priority < comp->priority) {
+			list_add(&comp->list, this->list.prev);
+			goto out;
+		}
+	}
+	list_add_tail(&comp->list, &jffs2_compressor_list);
+out:
+	D2(list_for_each_entry(this, &jffs2_compressor_list, list) {
+		printk(KERN_DEBUG "Compressor \"%s\", prio %d\n", this->name, this->priority);
+	})
+
+	spin_unlock(&jffs2_compressor_list_lock);
+
+	return 0;
+}
+
+int jffs2_unregister_compressor(struct jffs2_compressor *comp)
+{
+	D2(struct jffs2_compressor *this);
+
+	jffs2_dbg(1, "Unregistering JFFS2 compressor \"%s\"\n", comp->name);
+
+	spin_lock(&jffs2_compressor_list_lock);
+
+	if (comp->usecount) {
+		spin_unlock(&jffs2_compressor_list_lock);
+		pr_warn("Compressor module is in use. Unregister failed.\n");
+		return -1;
+	}
+	list_del(&comp->list);
+
+	D2(list_for_each_entry(this, &jffs2_compressor_list, list) {
+		printk(KERN_DEBUG "Compressor \"%s\", prio %d\n", this->name, this->priority);
+	})
+	spin_unlock(&jffs2_compressor_list_lock);
+	return 0;
+}
+
+void jffs2_free_comprbuf(unsigned char *comprbuf, unsigned char *orig)
+{
+	if (orig != comprbuf)
+		kfree(comprbuf);
+}
+
+int __init jffs2_compressors_init(void)
+{
+/* Registering compressors */
+#ifdef CONFIG_JFFS2_ZLIB
+	jffs2_zlib_init();
+#endif
+#ifdef CONFIG_JFFS2_RTIME
+	jffs2_rtime_init();
+#endif
+#ifdef CONFIG_JFFS2_RUBIN
+	jffs2_rubinmips_init();
+	jffs2_dynrubin_init();
+#endif
+#ifdef CONFIG_JFFS2_LZO
+	jffs2_lzo_init();
+#endif
+/* Setting default compression mode */
+#ifdef CONFIG_JFFS2_CMODE_NONE
+	jffs2_compression_mode = JFFS2_COMPR_MODE_NONE;
+	jffs2_dbg(1, "default compression mode: none\n");
+#else
+#ifdef CONFIG_JFFS2_CMODE_SIZE
+	jffs2_compression_mode = JFFS2_COMPR_MODE_SIZE;
+	jffs2_dbg(1, "default compression mode: size\n");
+#else
+#ifdef CONFIG_JFFS2_CMODE_FAVOURLZO
+	jffs2_compression_mode = JFFS2_COMPR_MODE_FAVOURLZO;
+	jffs2_dbg(1, "default compression mode: favourlzo\n");
+#else
+	jffs2_dbg(1, "default compression mode: priority\n");
+#endif
+#endif
+#endif
+	return 0;
+}
+
+int jffs2_compressors_exit(void)
+{
+/* Unregistering compressors */
+#ifdef CONFIG_JFFS2_LZO
+	jffs2_lzo_exit();
+#endif
+#ifdef CONFIG_JFFS2_RUBIN
+	jffs2_dynrubin_exit();
+	jffs2_rubinmips_exit();
+#endif
+#ifdef CONFIG_JFFS2_RTIME
+	jffs2_rtime_exit();
+#endif
+#ifdef CONFIG_JFFS2_ZLIB
+	jffs2_zlib_exit();
+#endif
+	return 0;
+}