Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 324 insertions, 0 deletions

diff --git a/include/uapi/sound/snd_sst_tokens.h b/include/uapi/sound/snd_sst_tokens.h
new file mode 100644
index 000000000..defeb0c6e
--- /dev/null
+++ b/include/uapi/sound/snd_sst_tokens.h
@@ -0,0 +1,324 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * snd_sst_tokens.h - Intel SST tokens definition
+ *
+ * Copyright (C) 2016 Intel Corp
+ * Author: Shreyas NC <shreyas.nc@intel.com>
+ */
+#ifndef __SND_SST_TOKENS_H__
+#define __SND_SST_TOKENS_H__
+
+/**
+ * %SKL_TKN_UUID:               Module UUID
+ *
+ * %SKL_TKN_U8_BLOCK_TYPE:      Type of the private data block.Can be:
+ *                              tuples, bytes, short and words
+ *
+ * %SKL_TKN_U8_IN_PIN_TYPE:     Input pin type,
+ *                              homogenous=0, heterogenous=1
+ *
+ * %SKL_TKN_U8_OUT_PIN_TYPE:    Output pin type,
+ *                              homogenous=0, heterogenous=1
+ * %SKL_TKN_U8_DYN_IN_PIN:      Configure Input pin dynamically
+ *                              if true
+ *
+ * %SKL_TKN_U8_DYN_OUT_PIN:     Configure Output pin dynamically
+ *                              if true
+ *
+ * %SKL_TKN_U8_IN_QUEUE_COUNT:  Store the number of Input pins
+ *
+ * %SKL_TKN_U8_OUT_QUEUE_COUNT: Store the number of Output pins
+ *
+ * %SKL_TKN_U8_TIME_SLOT:       TDM slot number
+ *
+ * %SKL_TKN_U8_CORE_ID:         Stores module affinity value.Can take
+ *                              the values:
+ *                              SKL_AFFINITY_CORE_0 = 0,
+ *                              SKL_AFFINITY_CORE_1,
+ *                              SKL_AFFINITY_CORE_MAX
+ *
+ * %SKL_TKN_U8_MOD_TYPE:        Module type value.
+ *
+ * %SKL_TKN_U8_CONN_TYPE:       Module connection type can be a FE,
+ *                              BE or NONE as defined :
+ *                              SKL_PIPE_CONN_TYPE_NONE = 0,
+ *                              SKL_PIPE_CONN_TYPE_FE = 1 (HOST_DMA)
+ *                              SKL_PIPE_CONN_TYPE_BE = 2 (LINK_DMA)
+ *
+ * %SKL_TKN_U8_DEV_TYPE:        Type of device to which the module is
+ *                              connected
+ *                              Can take the values:
+ *                              SKL_DEVICE_BT = 0x0,
+ *                              SKL_DEVICE_DMIC = 0x1,
+ *                              SKL_DEVICE_I2S = 0x2,
+ *                              SKL_DEVICE_SLIMBUS = 0x3,
+ *                              SKL_DEVICE_HDALINK = 0x4,
+ *                              SKL_DEVICE_HDAHOST = 0x5,
+ *                              SKL_DEVICE_NONE
+ *
+ * %SKL_TKN_U8_HW_CONN_TYPE:    Connection type of the HW to which the
+ *                              module is connected
+ *                              SKL_CONN_NONE = 0,
+ *                              SKL_CONN_SOURCE = 1,
+ *                              SKL_CONN_SINK = 2
+ *
+ * %SKL_TKN_U16_PIN_INST_ID:    Stores the pin instance id
+ *
+ * %SKL_TKN_U16_MOD_INST_ID:    Stores the mdule instance id
+ *
+ * %SKL_TKN_U32_MAX_MCPS:       Module max mcps value
+ *
+ * %SKL_TKN_U32_MEM_PAGES:      Module resource pages
+ *
+ * %SKL_TKN_U32_OBS:            Stores Output Buffer size
+ *
+ * %SKL_TKN_U32_IBS:            Stores input buffer size
+ *
+ * %SKL_TKN_U32_VBUS_ID:        Module VBUS_ID. PDM=0, SSP0=0,
+ *                              SSP1=1,SSP2=2,
+ *                              SSP3=3, SSP4=4,
+ *                              SSP5=5, SSP6=6,INVALID
+ *
+ * %SKL_TKN_U32_PARAMS_FIXUP:   Module Params fixup mask
+ * %SKL_TKN_U32_CONVERTER:      Module params converter mask
+ * %SKL_TKN_U32_PIPE_ID:        Stores the pipe id
+ *
+ * %SKL_TKN_U32_PIPE_CONN_TYPE: Type of the token to which the pipe is
+ *                              connected to. It can be
+ *                              SKL_PIPE_CONN_TYPE_NONE = 0,
+ *                              SKL_PIPE_CONN_TYPE_FE = 1 (HOST_DMA),
+ *                              SKL_PIPE_CONN_TYPE_BE = 2 (LINK_DMA),
+ *
+ * %SKL_TKN_U32_PIPE_PRIORITY:  Pipe priority value
+ * %SKL_TKN_U32_PIPE_MEM_PGS:   Pipe resource pages
+ *
+ * %SKL_TKN_U32_DIR_PIN_COUNT:  Value for the direction to set input/output
+ *                              formats and the pin count.
+ *                              The first 4 bits have the direction
+ *                              value and the next 4 have
+ *                              the pin count value.
+ *                              SKL_DIR_IN = 0, SKL_DIR_OUT = 1.
+ *                              The input and output formats
+ *                              share the same set of tokens
+ *                              with the distinction between input
+ *                              and output made by reading direction
+ *                              token.
+ *
+ * %SKL_TKN_U32_FMT_CH:         Supported channel count
+ *
+ * %SKL_TKN_U32_FMT_FREQ:       Supported frequency/sample rate
+ *
+ * %SKL_TKN_U32_FMT_BIT_DEPTH:  Supported container size
+ *
+ * %SKL_TKN_U32_FMT_SAMPLE_SIZE:Number of samples in the container
+ *
+ * %SKL_TKN_U32_FMT_CH_CONFIG:  Supported channel configurations for the
+ *                              input/output.
+ *
+ * %SKL_TKN_U32_FMT_INTERLEAVE: Interleaving style which can be per
+ *                              channel or per sample. The values can be :
+ *                              SKL_INTERLEAVING_PER_CHANNEL = 0,
+ *                              SKL_INTERLEAVING_PER_SAMPLE = 1,
+ *
+ * %SKL_TKN_U32_FMT_SAMPLE_TYPE:
+ *                              Specifies the sample type. Can take the
+ *                              values: SKL_SAMPLE_TYPE_INT_MSB = 0,
+ *                              SKL_SAMPLE_TYPE_INT_LSB = 1,
+ *                              SKL_SAMPLE_TYPE_INT_SIGNED = 2,
+ *                              SKL_SAMPLE_TYPE_INT_UNSIGNED = 3,
+ *                              SKL_SAMPLE_TYPE_FLOAT = 4
+ *
+ * %SKL_TKN_U32_CH_MAP:         Channel map values
+ * %SKL_TKN_U32_MOD_SET_PARAMS: It can take these values:
+ *                              SKL_PARAM_DEFAULT, SKL_PARAM_INIT,
+ *                              SKL_PARAM_SET, SKL_PARAM_BIND
+ *
+ * %SKL_TKN_U32_MOD_PARAM_ID:   ID of the module params
+ *
+ * %SKL_TKN_U32_CAPS_SET_PARAMS:
+ *                              Set params value
+ *
+ * %SKL_TKN_U32_CAPS_PARAMS_ID: Params ID
+ *
+ * %SKL_TKN_U32_CAPS_SIZE:      Caps size
+ *
+ * %SKL_TKN_U32_PROC_DOMAIN:    Specify processing domain
+ *
+ * %SKL_TKN_U32_LIB_COUNT:      Specifies the number of libraries
+ *
+ * %SKL_TKN_STR_LIB_NAME:       Specifies the library name
+ *
+ * %SKL_TKN_U32_PMODE:		Specifies the power mode for pipe
+ *
+ * %SKL_TKL_U32_D0I3_CAPS:	Specifies the D0i3 capability for module
+ *
+ * %SKL_TKN_U32_DMA_BUF_SIZE:	DMA buffer size in millisec
+ *
+ * %SKL_TKN_U32_PIPE_DIR:       Specifies pipe direction. Can be
+ *                              playback/capture.
+ *
+ * %SKL_TKN_U32_NUM_CONFIGS:    Number of pipe configs
+ *
+ * %SKL_TKN_U32_PATH_MEM_PGS:   Size of memory (in pages) required for pipeline
+ *                              and its data
+ *
+ * %SKL_TKN_U32_PIPE_CONFIG_ID: Config id for the modules in the pipe
+ *                              and PCM params supported by that pipe
+ *                              config. This is used as index to fill
+ *                              up the pipe config and module config
+ *                              structure.
+ *
+ * %SKL_TKN_U32_CFG_FREQ:
+ * %SKL_TKN_U8_CFG_CHAN:
+ * %SKL_TKN_U8_CFG_BPS:         PCM params (freq, channels, bits per sample)
+ *                              supported for each of the pipe configs.
+ *
+ * %SKL_TKN_CFG_MOD_RES_ID:     Module's resource index for each of the
+ *                              pipe config
+ *
+ * %SKL_TKN_CFG_MOD_FMT_ID:     Module's interface index for each of the
+ *                              pipe config
+ *
+ * %SKL_TKN_U8_NUM_MOD:         Number of modules in the manifest
+ *
+ * %SKL_TKN_MM_U8_MOD_IDX:      Current index of the module in the manifest
+ *
+ * %SKL_TKN_MM_U8_NUM_RES:      Number of resources for the module
+ *
+ * %SKL_TKN_MM_U8_NUM_INTF:     Number of interfaces for the module
+ *
+ * %SKL_TKN_MM_U32_RES_ID:      Resource index for the resource info to
+ *                              be filled into.
+ *                              A module can support multiple resource
+ *                              configuration and is represnted as a
+ *                              resource table. This index is used to
+ *                              fill information into appropriate index.
+ *
+ * %SKL_TKN_MM_U32_CPS:         DSP cycles per second
+ *
+ * %SKL_TKN_MM_U32_DMA_SIZE:    Allocated buffer size for gateway DMA
+ *
+ * %SKL_TKN_MM_U32_CPC:         DSP cycles allocated per frame
+ *
+ * %SKL_TKN_MM_U32_RES_PIN_ID:  Resource pin index in the module
+ *
+ * %SKL_TKN_MM_U32_INTF_PIN_ID: Interface index in the module
+ *
+ * %SKL_TKN_MM_U32_PIN_BUF:     Buffer size of the module pin
+ *
+ * %SKL_TKN_MM_U32_FMT_ID:      Format index for each of the interface/
+ *                              format information to be filled into.
+ *
+ * %SKL_TKN_MM_U32_NUM_IN_FMT:  Number of input formats
+ * %SKL_TKN_MM_U32_NUM_OUT_FMT: Number of output formats
+ *
+ * %SKL_TKN_U32_ASTATE_IDX:     Table Index for the A-State entry to be filled
+ *                              with kcps and clock source
+ *
+ * %SKL_TKN_U32_ASTATE_COUNT:   Number of valid entries in A-State table
+ *
+ * %SKL_TKN_U32_ASTATE_KCPS:    Specifies the core load threshold (in kilo
+ *                              cycles per second) below which DSP is clocked
+ *                              from source specified by clock source.
+ *
+ * %SKL_TKN_U32_ASTATE_CLK_SRC: Clock source for A-State entry
+ *
+ * %SKL_TKN_U32_FMT_CFG_IDX:    Format config index
+ *
+ * module_id and loadable flags dont have tokens as these values will be
+ * read from the DSP FW manifest
+ *
+ * Tokens defined can be used either in the manifest or widget private data.
+ *
+ * SKL_TKN_MM is used as a suffix for all tokens that represent
+ * module data in the manifest.
+ */
+enum SKL_TKNS {
+	SKL_TKN_UUID = 1,
+	SKL_TKN_U8_NUM_BLOCKS,
+	SKL_TKN_U8_BLOCK_TYPE,
+	SKL_TKN_U8_IN_PIN_TYPE,
+	SKL_TKN_U8_OUT_PIN_TYPE,
+	SKL_TKN_U8_DYN_IN_PIN,
+	SKL_TKN_U8_DYN_OUT_PIN,
+	SKL_TKN_U8_IN_QUEUE_COUNT,
+	SKL_TKN_U8_OUT_QUEUE_COUNT,
+	SKL_TKN_U8_TIME_SLOT,
+	SKL_TKN_U8_CORE_ID,
+	SKL_TKN_U8_MOD_TYPE,
+	SKL_TKN_U8_CONN_TYPE,
+	SKL_TKN_U8_DEV_TYPE,
+	SKL_TKN_U8_HW_CONN_TYPE,
+	SKL_TKN_U16_MOD_INST_ID,
+	SKL_TKN_U16_BLOCK_SIZE,
+	SKL_TKN_U32_MAX_MCPS,
+	SKL_TKN_U32_MEM_PAGES,
+	SKL_TKN_U32_OBS,
+	SKL_TKN_U32_IBS,
+	SKL_TKN_U32_VBUS_ID,
+	SKL_TKN_U32_PARAMS_FIXUP,
+	SKL_TKN_U32_CONVERTER,
+	SKL_TKN_U32_PIPE_ID,
+	SKL_TKN_U32_PIPE_CONN_TYPE,
+	SKL_TKN_U32_PIPE_PRIORITY,
+	SKL_TKN_U32_PIPE_MEM_PGS,
+	SKL_TKN_U32_DIR_PIN_COUNT,
+	SKL_TKN_U32_FMT_CH,
+	SKL_TKN_U32_FMT_FREQ,
+	SKL_TKN_U32_FMT_BIT_DEPTH,
+	SKL_TKN_U32_FMT_SAMPLE_SIZE,
+	SKL_TKN_U32_FMT_CH_CONFIG,
+	SKL_TKN_U32_FMT_INTERLEAVE,
+	SKL_TKN_U32_FMT_SAMPLE_TYPE,
+	SKL_TKN_U32_FMT_CH_MAP,
+	SKL_TKN_U32_PIN_MOD_ID,
+	SKL_TKN_U32_PIN_INST_ID,
+	SKL_TKN_U32_MOD_SET_PARAMS,
+	SKL_TKN_U32_MOD_PARAM_ID,
+	SKL_TKN_U32_CAPS_SET_PARAMS,
+	SKL_TKN_U32_CAPS_PARAMS_ID,
+	SKL_TKN_U32_CAPS_SIZE,
+	SKL_TKN_U32_PROC_DOMAIN,
+	SKL_TKN_U32_LIB_COUNT,
+	SKL_TKN_STR_LIB_NAME,
+	SKL_TKN_U32_PMODE,
+	SKL_TKL_U32_D0I3_CAPS, /* Typo added at v4.10 */
+	SKL_TKN_U32_D0I3_CAPS = SKL_TKL_U32_D0I3_CAPS,
+	SKL_TKN_U32_DMA_BUF_SIZE,
+
+	SKL_TKN_U32_PIPE_DIRECTION,
+	SKL_TKN_U32_PIPE_CONFIG_ID,
+	SKL_TKN_U32_NUM_CONFIGS,
+	SKL_TKN_U32_PATH_MEM_PGS,
+
+	SKL_TKN_U32_CFG_FREQ,
+	SKL_TKN_U8_CFG_CHAN,
+	SKL_TKN_U8_CFG_BPS,
+	SKL_TKN_CFG_MOD_RES_ID,
+	SKL_TKN_CFG_MOD_FMT_ID,
+	SKL_TKN_U8_NUM_MOD,
+
+	SKL_TKN_MM_U8_MOD_IDX,
+	SKL_TKN_MM_U8_NUM_RES,
+	SKL_TKN_MM_U8_NUM_INTF,
+	SKL_TKN_MM_U32_RES_ID,
+	SKL_TKN_MM_U32_CPS,
+	SKL_TKN_MM_U32_DMA_SIZE,
+	SKL_TKN_MM_U32_CPC,
+	SKL_TKN_MM_U32_RES_PIN_ID,
+	SKL_TKN_MM_U32_INTF_PIN_ID,
+	SKL_TKN_MM_U32_PIN_BUF,
+	SKL_TKN_MM_U32_FMT_ID,
+	SKL_TKN_MM_U32_NUM_IN_FMT,
+	SKL_TKN_MM_U32_NUM_OUT_FMT,
+
+	SKL_TKN_U32_ASTATE_IDX,
+	SKL_TKN_U32_ASTATE_COUNT,
+	SKL_TKN_U32_ASTATE_KCPS,
+	SKL_TKN_U32_ASTATE_CLK_SRC,
+
+	SKL_TKN_U32_FMT_CFG_IDX = 96,
+	SKL_TKN_MAX = SKL_TKN_U32_FMT_CFG_IDX,
+};
+
+#endif