Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 221 insertions, 0 deletions

diff --git a/kernel/debug/kdb/kdb_bt.c b/kernel/debug/kdb/kdb_bt.c
new file mode 100644
index 000000000..10b454554
--- /dev/null
+++ b/kernel/debug/kdb/kdb_bt.c
@@ -0,0 +1,221 @@
+/*
+ * Kernel Debugger Architecture Independent Stack Traceback
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 1999-2004 Silicon Graphics, Inc.  All Rights Reserved.
+ * Copyright (c) 2009 Wind River Systems, Inc.  All Rights Reserved.
+ */
+
+#include <linux/ctype.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/sched/signal.h>
+#include <linux/sched/debug.h>
+#include <linux/kdb.h>
+#include <linux/nmi.h>
+#include "kdb_private.h"
+
+
+static void kdb_show_stack(struct task_struct *p, void *addr)
+{
+	kdb_trap_printk++;
+
+	if (!addr && kdb_task_has_cpu(p)) {
+		int old_lvl = console_loglevel;
+
+		console_loglevel = CONSOLE_LOGLEVEL_MOTORMOUTH;
+		kdb_dump_stack_on_cpu(kdb_process_cpu(p));
+		console_loglevel = old_lvl;
+	} else {
+		show_stack(p, addr, KERN_EMERG);
+	}
+
+	kdb_trap_printk--;
+}
+
+/*
+ * kdb_bt
+ *
+ *	This function implements the 'bt' command.  Print a stack
+ *	traceback.
+ *
+ *	bt [<address-expression>]	(addr-exp is for alternate stacks)
+ *	btp <pid>			Kernel stack for <pid>
+ *	btt <address-expression>	Kernel stack for task structure at
+ *					<address-expression>
+ *	bta [state_chars>|A]		All useful processes, optionally
+ *					filtered by state
+ *	btc [<cpu>]			The current process on one cpu,
+ *					default is all cpus
+ *
+ *	bt <address-expression> refers to a address on the stack, that location
+ *	is assumed to contain a return address.
+ *
+ *	btt <address-expression> refers to the address of a struct task.
+ *
+ * Inputs:
+ *	argc	argument count
+ *	argv	argument vector
+ * Outputs:
+ *	None.
+ * Returns:
+ *	zero for success, a kdb diagnostic if error
+ * Locking:
+ *	none.
+ * Remarks:
+ *	Backtrack works best when the code uses frame pointers.  But even
+ *	without frame pointers we should get a reasonable trace.
+ *
+ *	mds comes in handy when examining the stack to do a manual traceback or
+ *	to get a starting point for bt <address-expression>.
+ */
+
+static int
+kdb_bt1(struct task_struct *p, const char *mask, bool btaprompt)
+{
+	char ch;
+
+	if (kdb_getarea(ch, (unsigned long)p) ||
+	    kdb_getarea(ch, (unsigned long)(p+1)-1))
+		return KDB_BADADDR;
+	if (!kdb_task_state(p, mask))
+		return 0;
+	kdb_printf("Stack traceback for pid %d\n", p->pid);
+	kdb_ps1(p);
+	kdb_show_stack(p, NULL);
+	if (btaprompt) {
+		kdb_printf("Enter <q> to end, <cr> or <space> to continue:");
+		do {
+			ch = kdb_getchar();
+		} while (!strchr("\r\n q", ch));
+		kdb_printf("\n");
+
+		/* reset the pager */
+		kdb_nextline = 1;
+
+		if (ch == 'q')
+			return 1;
+	}
+	touch_nmi_watchdog();
+	return 0;
+}
+
+static void
+kdb_bt_cpu(unsigned long cpu)
+{
+	struct task_struct *kdb_tsk;
+
+	if (cpu >= num_possible_cpus() || !cpu_online(cpu)) {
+		kdb_printf("WARNING: no process for cpu %ld\n", cpu);
+		return;
+	}
+
+	/* If a CPU failed to round up we could be here */
+	kdb_tsk = KDB_TSK(cpu);
+	if (!kdb_tsk) {
+		kdb_printf("WARNING: no task for cpu %ld\n", cpu);
+		return;
+	}
+
+	kdb_bt1(kdb_tsk, "A", false);
+}
+
+int
+kdb_bt(int argc, const char **argv)
+{
+	int diag;
+	int btaprompt = 1;
+	int nextarg;
+	unsigned long addr;
+	long offset;
+
+	/* Prompt after each proc in bta */
+	kdbgetintenv("BTAPROMPT", &btaprompt);
+
+	if (strcmp(argv[0], "bta") == 0) {
+		struct task_struct *g, *p;
+		unsigned long cpu;
+		const char *mask = argc ? argv[1] : kdbgetenv("PS");
+
+		if (argc == 0)
+			kdb_ps_suppressed();
+		/* Run the active tasks first */
+		for_each_online_cpu(cpu) {
+			p = kdb_curr_task(cpu);
+			if (kdb_bt1(p, mask, btaprompt))
+				return 0;
+		}
+		/* Now the inactive tasks */
+		for_each_process_thread(g, p) {
+			if (KDB_FLAG(CMD_INTERRUPT))
+				return 0;
+			if (task_curr(p))
+				continue;
+			if (kdb_bt1(p, mask, btaprompt))
+				return 0;
+		}
+	} else if (strcmp(argv[0], "btp") == 0) {
+		struct task_struct *p;
+		unsigned long pid;
+		if (argc != 1)
+			return KDB_ARGCOUNT;
+		diag = kdbgetularg((char *)argv[1], &pid);
+		if (diag)
+			return diag;
+		p = find_task_by_pid_ns(pid, &init_pid_ns);
+		if (p)
+			return kdb_bt1(p, "A", false);
+		kdb_printf("No process with pid == %ld found\n", pid);
+		return 0;
+	} else if (strcmp(argv[0], "btt") == 0) {
+		if (argc != 1)
+			return KDB_ARGCOUNT;
+		diag = kdbgetularg((char *)argv[1], &addr);
+		if (diag)
+			return diag;
+		return kdb_bt1((struct task_struct *)addr, "A", false);
+	} else if (strcmp(argv[0], "btc") == 0) {
+		unsigned long cpu = ~0;
+		if (argc > 1)
+			return KDB_ARGCOUNT;
+		if (argc == 1) {
+			diag = kdbgetularg((char *)argv[1], &cpu);
+			if (diag)
+				return diag;
+		}
+		if (cpu != ~0) {
+			kdb_bt_cpu(cpu);
+		} else {
+			/*
+			 * Recursive use of kdb_parse, do not use argv after
+			 * this point.
+			 */
+			argv = NULL;
+			kdb_printf("btc: cpu status: ");
+			kdb_parse("cpu\n");
+			for_each_online_cpu(cpu) {
+				kdb_bt_cpu(cpu);
+				touch_nmi_watchdog();
+			}
+		}
+		return 0;
+	} else {
+		if (argc) {
+			nextarg = 1;
+			diag = kdbgetaddrarg(argc, argv, &nextarg, &addr,
+					     &offset, NULL);
+			if (diag)
+				return diag;
+			kdb_show_stack(kdb_current_task, (void *)addr);
+			return 0;
+		} else {
+			return kdb_bt1(kdb_current_task, "A", false);
+		}
+	}
+
+	/* NOTREACHED */
+	return 0;
+}