Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 343 insertions, 0 deletions

diff --git a/kernel/sched/completion.c b/kernel/sched/completion.c
new file mode 100644
index 000000000..d57a5c1c1
--- /dev/null
+++ b/kernel/sched/completion.c
@@ -0,0 +1,343 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/*
+ * Generic wait-for-completion handler;
+ *
+ * It differs from semaphores in that their default case is the opposite,
+ * wait_for_completion default blocks whereas semaphore default non-block. The
+ * interface also makes it easy to 'complete' multiple waiting threads,
+ * something which isn't entirely natural for semaphores.
+ *
+ * But more importantly, the primitive documents the usage. Semaphores would
+ * typically be used for exclusion which gives rise to priority inversion.
+ * Waiting for completion is a typically sync point, but not an exclusion point.
+ */
+
+/**
+ * complete: - signals a single thread waiting on this completion
+ * @x:  holds the state of this particular completion
+ *
+ * This will wake up a single thread waiting on this completion. Threads will be
+ * awakened in the same order in which they were queued.
+ *
+ * See also complete_all(), wait_for_completion() and related routines.
+ *
+ * If this function wakes up a task, it executes a full memory barrier before
+ * accessing the task state.
+ */
+void complete(struct completion *x)
+{
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&x->wait.lock, flags);
+
+	if (x->done != UINT_MAX)
+		x->done++;
+	swake_up_locked(&x->wait);
+	raw_spin_unlock_irqrestore(&x->wait.lock, flags);
+}
+EXPORT_SYMBOL(complete);
+
+/**
+ * complete_all: - signals all threads waiting on this completion
+ * @x:  holds the state of this particular completion
+ *
+ * This will wake up all threads waiting on this particular completion event.
+ *
+ * If this function wakes up a task, it executes a full memory barrier before
+ * accessing the task state.
+ *
+ * Since complete_all() sets the completion of @x permanently to done
+ * to allow multiple waiters to finish, a call to reinit_completion()
+ * must be used on @x if @x is to be used again. The code must make
+ * sure that all waiters have woken and finished before reinitializing
+ * @x. Also note that the function completion_done() can not be used
+ * to know if there are still waiters after complete_all() has been called.
+ */
+void complete_all(struct completion *x)
+{
+	unsigned long flags;
+
+	lockdep_assert_RT_in_threaded_ctx();
+
+	raw_spin_lock_irqsave(&x->wait.lock, flags);
+	x->done = UINT_MAX;
+	swake_up_all_locked(&x->wait);
+	raw_spin_unlock_irqrestore(&x->wait.lock, flags);
+}
+EXPORT_SYMBOL(complete_all);
+
+static inline long __sched
+do_wait_for_common(struct completion *x,
+		   long (*action)(long), long timeout, int state)
+{
+	if (!x->done) {
+		DECLARE_SWAITQUEUE(wait);
+
+		do {
+			if (signal_pending_state(state, current)) {
+				timeout = -ERESTARTSYS;
+				break;
+			}
+			__prepare_to_swait(&x->wait, &wait);
+			__set_current_state(state);
+			raw_spin_unlock_irq(&x->wait.lock);
+			timeout = action(timeout);
+			raw_spin_lock_irq(&x->wait.lock);
+		} while (!x->done && timeout);
+		__finish_swait(&x->wait, &wait);
+		if (!x->done)
+			return timeout;
+	}
+	if (x->done != UINT_MAX)
+		x->done--;
+	return timeout ?: 1;
+}
+
+static inline long __sched
+__wait_for_common(struct completion *x,
+		  long (*action)(long), long timeout, int state)
+{
+	might_sleep();
+
+	complete_acquire(x);
+
+	raw_spin_lock_irq(&x->wait.lock);
+	timeout = do_wait_for_common(x, action, timeout, state);
+	raw_spin_unlock_irq(&x->wait.lock);
+
+	complete_release(x);
+
+	return timeout;
+}
+
+static long __sched
+wait_for_common(struct completion *x, long timeout, int state)
+{
+	return __wait_for_common(x, schedule_timeout, timeout, state);
+}
+
+static long __sched
+wait_for_common_io(struct completion *x, long timeout, int state)
+{
+	return __wait_for_common(x, io_schedule_timeout, timeout, state);
+}
+
+/**
+ * wait_for_completion: - waits for completion of a task
+ * @x:  holds the state of this particular completion
+ *
+ * This waits to be signaled for completion of a specific task. It is NOT
+ * interruptible and there is no timeout.
+ *
+ * See also similar routines (i.e. wait_for_completion_timeout()) with timeout
+ * and interrupt capability. Also see complete().
+ */
+void __sched wait_for_completion(struct completion *x)
+{
+	wait_for_common(x, MAX_SCHEDULE_TIMEOUT, TASK_UNINTERRUPTIBLE);
+}
+EXPORT_SYMBOL(wait_for_completion);
+
+/**
+ * wait_for_completion_timeout: - waits for completion of a task (w/timeout)
+ * @x:  holds the state of this particular completion
+ * @timeout:  timeout value in jiffies
+ *
+ * This waits for either a completion of a specific task to be signaled or for a
+ * specified timeout to expire. The timeout is in jiffies. It is not
+ * interruptible.
+ *
+ * Return: 0 if timed out, and positive (at least 1, or number of jiffies left
+ * till timeout) if completed.
+ */
+unsigned long __sched
+wait_for_completion_timeout(struct completion *x, unsigned long timeout)
+{
+	return wait_for_common(x, timeout, TASK_UNINTERRUPTIBLE);
+}
+EXPORT_SYMBOL(wait_for_completion_timeout);
+
+/**
+ * wait_for_completion_io: - waits for completion of a task
+ * @x:  holds the state of this particular completion
+ *
+ * This waits to be signaled for completion of a specific task. It is NOT
+ * interruptible and there is no timeout. The caller is accounted as waiting
+ * for IO (which traditionally means blkio only).
+ */
+void __sched wait_for_completion_io(struct completion *x)
+{
+	wait_for_common_io(x, MAX_SCHEDULE_TIMEOUT, TASK_UNINTERRUPTIBLE);
+}
+EXPORT_SYMBOL(wait_for_completion_io);
+
+/**
+ * wait_for_completion_io_timeout: - waits for completion of a task (w/timeout)
+ * @x:  holds the state of this particular completion
+ * @timeout:  timeout value in jiffies
+ *
+ * This waits for either a completion of a specific task to be signaled or for a
+ * specified timeout to expire. The timeout is in jiffies. It is not
+ * interruptible. The caller is accounted as waiting for IO (which traditionally
+ * means blkio only).
+ *
+ * Return: 0 if timed out, and positive (at least 1, or number of jiffies left
+ * till timeout) if completed.
+ */
+unsigned long __sched
+wait_for_completion_io_timeout(struct completion *x, unsigned long timeout)
+{
+	return wait_for_common_io(x, timeout, TASK_UNINTERRUPTIBLE);
+}
+EXPORT_SYMBOL(wait_for_completion_io_timeout);
+
+/**
+ * wait_for_completion_interruptible: - waits for completion of a task (w/intr)
+ * @x:  holds the state of this particular completion
+ *
+ * This waits for completion of a specific task to be signaled. It is
+ * interruptible.
+ *
+ * Return: -ERESTARTSYS if interrupted, 0 if completed.
+ */
+int __sched wait_for_completion_interruptible(struct completion *x)
+{
+	long t = wait_for_common(x, MAX_SCHEDULE_TIMEOUT, TASK_INTERRUPTIBLE);
+
+	if (t == -ERESTARTSYS)
+		return t;
+	return 0;
+}
+EXPORT_SYMBOL(wait_for_completion_interruptible);
+
+/**
+ * wait_for_completion_interruptible_timeout: - waits for completion (w/(to,intr))
+ * @x:  holds the state of this particular completion
+ * @timeout:  timeout value in jiffies
+ *
+ * This waits for either a completion of a specific task to be signaled or for a
+ * specified timeout to expire. It is interruptible. The timeout is in jiffies.
+ *
+ * Return: -ERESTARTSYS if interrupted, 0 if timed out, positive (at least 1,
+ * or number of jiffies left till timeout) if completed.
+ */
+long __sched
+wait_for_completion_interruptible_timeout(struct completion *x,
+					  unsigned long timeout)
+{
+	return wait_for_common(x, timeout, TASK_INTERRUPTIBLE);
+}
+EXPORT_SYMBOL(wait_for_completion_interruptible_timeout);
+
+/**
+ * wait_for_completion_killable: - waits for completion of a task (killable)
+ * @x:  holds the state of this particular completion
+ *
+ * This waits to be signaled for completion of a specific task. It can be
+ * interrupted by a kill signal.
+ *
+ * Return: -ERESTARTSYS if interrupted, 0 if completed.
+ */
+int __sched wait_for_completion_killable(struct completion *x)
+{
+	long t = wait_for_common(x, MAX_SCHEDULE_TIMEOUT, TASK_KILLABLE);
+
+	if (t == -ERESTARTSYS)
+		return t;
+	return 0;
+}
+EXPORT_SYMBOL(wait_for_completion_killable);
+
+int __sched wait_for_completion_state(struct completion *x, unsigned int state)
+{
+	long t = wait_for_common(x, MAX_SCHEDULE_TIMEOUT, state);
+
+	if (t == -ERESTARTSYS)
+		return t;
+	return 0;
+}
+EXPORT_SYMBOL(wait_for_completion_state);
+
+/**
+ * wait_for_completion_killable_timeout: - waits for completion of a task (w/(to,killable))
+ * @x:  holds the state of this particular completion
+ * @timeout:  timeout value in jiffies
+ *
+ * This waits for either a completion of a specific task to be
+ * signaled or for a specified timeout to expire. It can be
+ * interrupted by a kill signal. The timeout is in jiffies.
+ *
+ * Return: -ERESTARTSYS if interrupted, 0 if timed out, positive (at least 1,
+ * or number of jiffies left till timeout) if completed.
+ */
+long __sched
+wait_for_completion_killable_timeout(struct completion *x,
+				     unsigned long timeout)
+{
+	return wait_for_common(x, timeout, TASK_KILLABLE);
+}
+EXPORT_SYMBOL(wait_for_completion_killable_timeout);
+
+/**
+ *	try_wait_for_completion - try to decrement a completion without blocking
+ *	@x:	completion structure
+ *
+ *	Return: 0 if a decrement cannot be done without blocking
+ *		 1 if a decrement succeeded.
+ *
+ *	If a completion is being used as a counting completion,
+ *	attempt to decrement the counter without blocking. This
+ *	enables us to avoid waiting if the resource the completion
+ *	is protecting is not available.
+ */
+bool try_wait_for_completion(struct completion *x)
+{
+	unsigned long flags;
+	bool ret = true;
+
+	/*
+	 * Since x->done will need to be locked only
+	 * in the non-blocking case, we check x->done
+	 * first without taking the lock so we can
+	 * return early in the blocking case.
+	 */
+	if (!READ_ONCE(x->done))
+		return false;
+
+	raw_spin_lock_irqsave(&x->wait.lock, flags);
+	if (!x->done)
+		ret = false;
+	else if (x->done != UINT_MAX)
+		x->done--;
+	raw_spin_unlock_irqrestore(&x->wait.lock, flags);
+	return ret;
+}
+EXPORT_SYMBOL(try_wait_for_completion);
+
+/**
+ *	completion_done - Test to see if a completion has any waiters
+ *	@x:	completion structure
+ *
+ *	Return: 0 if there are waiters (wait_for_completion() in progress)
+ *		 1 if there are no waiters.
+ *
+ *	Note, this will always return true if complete_all() was called on @X.
+ */
+bool completion_done(struct completion *x)
+{
+	unsigned long flags;
+
+	if (!READ_ONCE(x->done))
+		return false;
+
+	/*
+	 * If ->done, we need to wait for complete() to release ->wait.lock
+	 * otherwise we can end up freeing the completion before complete()
+	 * is done referencing it.
+	 */
+	raw_spin_lock_irqsave(&x->wait.lock, flags);
+	raw_spin_unlock_irqrestore(&x->wait.lock, flags);
+	return true;
+}
+EXPORT_SYMBOL(completion_done);