Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 234 insertions, 0 deletions

diff --git a/lib/mpi/mpi-div.c b/lib/mpi/mpi-div.c
new file mode 100644
index 000000000..45beab8b9
--- /dev/null
+++ b/lib/mpi/mpi-div.c
@@ -0,0 +1,234 @@
+/* mpi-div.c  -  MPI functions
+ * Copyright (C) 1994, 1996, 1998, 2001, 2002,
+ *               2003 Free Software Foundation, Inc.
+ *
+ * This file is part of Libgcrypt.
+ *
+ * Note: This code is heavily based on the GNU MP Library.
+ *	 Actually it's the same code with only minor changes in the
+ *	 way the data is stored; this is to support the abstraction
+ *	 of an optional secure memory allocation which may be used
+ *	 to avoid revealing of sensitive data due to paging etc.
+ */
+
+#include "mpi-internal.h"
+#include "longlong.h"
+
+void mpi_tdiv_qr(MPI quot, MPI rem, MPI num, MPI den);
+void mpi_fdiv_qr(MPI quot, MPI rem, MPI dividend, MPI divisor);
+
+void mpi_fdiv_r(MPI rem, MPI dividend, MPI divisor)
+{
+	int divisor_sign = divisor->sign;
+	MPI temp_divisor = NULL;
+
+	/* We need the original value of the divisor after the remainder has been
+	 * preliminary calculated.	We have to copy it to temporary space if it's
+	 * the same variable as REM.
+	 */
+	if (rem == divisor) {
+		temp_divisor = mpi_copy(divisor);
+		divisor = temp_divisor;
+	}
+
+	mpi_tdiv_r(rem, dividend, divisor);
+
+	if (((divisor_sign?1:0) ^ (dividend->sign?1:0)) && rem->nlimbs)
+		mpi_add(rem, rem, divisor);
+
+	if (temp_divisor)
+		mpi_free(temp_divisor);
+}
+
+void mpi_fdiv_q(MPI quot, MPI dividend, MPI divisor)
+{
+	MPI tmp = mpi_alloc(mpi_get_nlimbs(quot));
+	mpi_fdiv_qr(quot, tmp, dividend, divisor);
+	mpi_free(tmp);
+}
+
+void mpi_fdiv_qr(MPI quot, MPI rem, MPI dividend, MPI divisor)
+{
+	int divisor_sign = divisor->sign;
+	MPI temp_divisor = NULL;
+
+	if (quot == divisor || rem == divisor) {
+		temp_divisor = mpi_copy(divisor);
+		divisor = temp_divisor;
+	}
+
+	mpi_tdiv_qr(quot, rem, dividend, divisor);
+
+	if ((divisor_sign ^ dividend->sign) && rem->nlimbs) {
+		mpi_sub_ui(quot, quot, 1);
+		mpi_add(rem, rem, divisor);
+	}
+
+	if (temp_divisor)
+		mpi_free(temp_divisor);
+}
+
+/* If den == quot, den needs temporary storage.
+ * If den == rem, den needs temporary storage.
+ * If num == quot, num needs temporary storage.
+ * If den has temporary storage, it can be normalized while being copied,
+ *   i.e no extra storage should be allocated.
+ */
+
+void mpi_tdiv_r(MPI rem, MPI num, MPI den)
+{
+	mpi_tdiv_qr(NULL, rem, num, den);
+}
+
+void mpi_tdiv_qr(MPI quot, MPI rem, MPI num, MPI den)
+{
+	mpi_ptr_t np, dp;
+	mpi_ptr_t qp, rp;
+	mpi_size_t nsize = num->nlimbs;
+	mpi_size_t dsize = den->nlimbs;
+	mpi_size_t qsize, rsize;
+	mpi_size_t sign_remainder = num->sign;
+	mpi_size_t sign_quotient = num->sign ^ den->sign;
+	unsigned int normalization_steps;
+	mpi_limb_t q_limb;
+	mpi_ptr_t marker[5];
+	int markidx = 0;
+
+	/* Ensure space is enough for quotient and remainder.
+	 * We need space for an extra limb in the remainder, because it's
+	 * up-shifted (normalized) below.
+	 */
+	rsize = nsize + 1;
+	mpi_resize(rem, rsize);
+
+	qsize = rsize - dsize;	  /* qsize cannot be bigger than this.	*/
+	if (qsize <= 0) {
+		if (num != rem) {
+			rem->nlimbs = num->nlimbs;
+			rem->sign = num->sign;
+			MPN_COPY(rem->d, num->d, nsize);
+		}
+		if (quot) {
+			/* This needs to follow the assignment to rem, in case the
+			 * numerator and quotient are the same.
+			 */
+			quot->nlimbs = 0;
+			quot->sign = 0;
+		}
+		return;
+	}
+
+	if (quot)
+		mpi_resize(quot, qsize);
+
+	/* Read pointers here, when reallocation is finished.  */
+	np = num->d;
+	dp = den->d;
+	rp = rem->d;
+
+	/* Optimize division by a single-limb divisor.  */
+	if (dsize == 1) {
+		mpi_limb_t rlimb;
+		if (quot) {
+			qp = quot->d;
+			rlimb = mpihelp_divmod_1(qp, np, nsize, dp[0]);
+			qsize -= qp[qsize - 1] == 0;
+			quot->nlimbs = qsize;
+			quot->sign = sign_quotient;
+		} else
+			rlimb = mpihelp_mod_1(np, nsize, dp[0]);
+		rp[0] = rlimb;
+		rsize = rlimb != 0?1:0;
+		rem->nlimbs = rsize;
+		rem->sign = sign_remainder;
+		return;
+	}
+
+
+	if (quot) {
+		qp = quot->d;
+		/* Make sure QP and NP point to different objects.  Otherwise the
+		 * numerator would be gradually overwritten by the quotient limbs.
+		 */
+		if (qp == np) { /* Copy NP object to temporary space.  */
+			np = marker[markidx++] = mpi_alloc_limb_space(nsize);
+			MPN_COPY(np, qp, nsize);
+		}
+	} else /* Put quotient at top of remainder. */
+		qp = rp + dsize;
+
+	normalization_steps = count_leading_zeros(dp[dsize - 1]);
+
+	/* Normalize the denominator, i.e. make its most significant bit set by
+	 * shifting it NORMALIZATION_STEPS bits to the left.  Also shift the
+	 * numerator the same number of steps (to keep the quotient the same!).
+	 */
+	if (normalization_steps) {
+		mpi_ptr_t tp;
+		mpi_limb_t nlimb;
+
+		/* Shift up the denominator setting the most significant bit of
+		 * the most significant word.  Use temporary storage not to clobber
+		 * the original contents of the denominator.
+		 */
+		tp = marker[markidx++] = mpi_alloc_limb_space(dsize);
+		mpihelp_lshift(tp, dp, dsize, normalization_steps);
+		dp = tp;
+
+		/* Shift up the numerator, possibly introducing a new most
+		 * significant word.  Move the shifted numerator in the remainder
+		 * meanwhile.
+		 */
+		nlimb = mpihelp_lshift(rp, np, nsize, normalization_steps);
+		if (nlimb) {
+			rp[nsize] = nlimb;
+			rsize = nsize + 1;
+		} else
+			rsize = nsize;
+	} else {
+		/* The denominator is already normalized, as required.	Copy it to
+		 * temporary space if it overlaps with the quotient or remainder.
+		 */
+		if (dp == rp || (quot && (dp == qp))) {
+			mpi_ptr_t tp;
+
+			tp = marker[markidx++] = mpi_alloc_limb_space(dsize);
+			MPN_COPY(tp, dp, dsize);
+			dp = tp;
+		}
+
+		/* Move the numerator to the remainder.  */
+		if (rp != np)
+			MPN_COPY(rp, np, nsize);
+
+		rsize = nsize;
+	}
+
+	q_limb = mpihelp_divrem(qp, 0, rp, rsize, dp, dsize);
+
+	if (quot) {
+		qsize = rsize - dsize;
+		if (q_limb) {
+			qp[qsize] = q_limb;
+			qsize += 1;
+		}
+
+		quot->nlimbs = qsize;
+		quot->sign = sign_quotient;
+	}
+
+	rsize = dsize;
+	MPN_NORMALIZE(rp, rsize);
+
+	if (normalization_steps && rsize) {
+		mpihelp_rshift(rp, rp, rsize, normalization_steps);
+		rsize -= rp[rsize - 1] == 0?1:0;
+	}
+
+	rem->nlimbs = rsize;
+	rem->sign	= sign_remainder;
+	while (markidx) {
+		markidx--;
+		mpi_free_limb_space(marker[markidx]);
+	}
+}