Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 263 insertions, 0 deletions

diff --git a/lib/plist.c b/lib/plist.c
new file mode 100644
index 000000000..0d86ed7a7
--- /dev/null
+++ b/lib/plist.c
@@ -0,0 +1,263 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * lib/plist.c
+ *
+ * Descending-priority-sorted double-linked list
+ *
+ * (C) 2002-2003 Intel Corp
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>.
+ *
+ * 2001-2005 (c) MontaVista Software, Inc.
+ * Daniel Walker <dwalker@mvista.com>
+ *
+ * (C) 2005 Thomas Gleixner <tglx@linutronix.de>
+ *
+ * Simplifications of the original code by
+ * Oleg Nesterov <oleg@tv-sign.ru>
+ *
+ * Based on simple lists (include/linux/list.h).
+ *
+ * This file contains the add / del functions which are considered to
+ * be too large to inline. See include/linux/plist.h for further
+ * information.
+ */
+
+#include <linux/bug.h>
+#include <linux/plist.h>
+
+#ifdef CONFIG_DEBUG_PLIST
+
+static struct plist_head test_head;
+
+static void plist_check_prev_next(struct list_head *t, struct list_head *p,
+				  struct list_head *n)
+{
+	WARN(n->prev != p || p->next != n,
+			"top: %p, n: %p, p: %p\n"
+			"prev: %p, n: %p, p: %p\n"
+			"next: %p, n: %p, p: %p\n",
+			 t, t->next, t->prev,
+			p, p->next, p->prev,
+			n, n->next, n->prev);
+}
+
+static void plist_check_list(struct list_head *top)
+{
+	struct list_head *prev = top, *next = top->next;
+
+	plist_check_prev_next(top, prev, next);
+	while (next != top) {
+		prev = next;
+		next = prev->next;
+		plist_check_prev_next(top, prev, next);
+	}
+}
+
+static void plist_check_head(struct plist_head *head)
+{
+	if (!plist_head_empty(head))
+		plist_check_list(&plist_first(head)->prio_list);
+	plist_check_list(&head->node_list);
+}
+
+#else
+# define plist_check_head(h)	do { } while (0)
+#endif
+
+/**
+ * plist_add - add @node to @head
+ *
+ * @node:	&struct plist_node pointer
+ * @head:	&struct plist_head pointer
+ */
+void plist_add(struct plist_node *node, struct plist_head *head)
+{
+	struct plist_node *first, *iter, *prev = NULL;
+	struct list_head *node_next = &head->node_list;
+
+	plist_check_head(head);
+	WARN_ON(!plist_node_empty(node));
+	WARN_ON(!list_empty(&node->prio_list));
+
+	if (plist_head_empty(head))
+		goto ins_node;
+
+	first = iter = plist_first(head);
+
+	do {
+		if (node->prio < iter->prio) {
+			node_next = &iter->node_list;
+			break;
+		}
+
+		prev = iter;
+		iter = list_entry(iter->prio_list.next,
+				struct plist_node, prio_list);
+	} while (iter != first);
+
+	if (!prev || prev->prio != node->prio)
+		list_add_tail(&node->prio_list, &iter->prio_list);
+ins_node:
+	list_add_tail(&node->node_list, node_next);
+
+	plist_check_head(head);
+}
+
+/**
+ * plist_del - Remove a @node from plist.
+ *
+ * @node:	&struct plist_node pointer - entry to be removed
+ * @head:	&struct plist_head pointer - list head
+ */
+void plist_del(struct plist_node *node, struct plist_head *head)
+{
+	plist_check_head(head);
+
+	if (!list_empty(&node->prio_list)) {
+		if (node->node_list.next != &head->node_list) {
+			struct plist_node *next;
+
+			next = list_entry(node->node_list.next,
+					struct plist_node, node_list);
+
+			/* add the next plist_node into prio_list */
+			if (list_empty(&next->prio_list))
+				list_add(&next->prio_list, &node->prio_list);
+		}
+		list_del_init(&node->prio_list);
+	}
+
+	list_del_init(&node->node_list);
+
+	plist_check_head(head);
+}
+
+/**
+ * plist_requeue - Requeue @node at end of same-prio entries.
+ *
+ * This is essentially an optimized plist_del() followed by
+ * plist_add().  It moves an entry already in the plist to
+ * after any other same-priority entries.
+ *
+ * @node:	&struct plist_node pointer - entry to be moved
+ * @head:	&struct plist_head pointer - list head
+ */
+void plist_requeue(struct plist_node *node, struct plist_head *head)
+{
+	struct plist_node *iter;
+	struct list_head *node_next = &head->node_list;
+
+	plist_check_head(head);
+	BUG_ON(plist_head_empty(head));
+	BUG_ON(plist_node_empty(node));
+
+	if (node == plist_last(head))
+		return;
+
+	iter = plist_next(node);
+
+	if (node->prio != iter->prio)
+		return;
+
+	plist_del(node, head);
+
+	plist_for_each_continue(iter, head) {
+		if (node->prio != iter->prio) {
+			node_next = &iter->node_list;
+			break;
+		}
+	}
+	list_add_tail(&node->node_list, node_next);
+
+	plist_check_head(head);
+}
+
+#ifdef CONFIG_DEBUG_PLIST
+#include <linux/sched.h>
+#include <linux/sched/clock.h>
+#include <linux/module.h>
+#include <linux/init.h>
+
+static struct plist_node __initdata test_node[241];
+
+static void __init plist_test_check(int nr_expect)
+{
+	struct plist_node *first, *prio_pos, *node_pos;
+
+	if (plist_head_empty(&test_head)) {
+		BUG_ON(nr_expect != 0);
+		return;
+	}
+
+	prio_pos = first = plist_first(&test_head);
+	plist_for_each(node_pos, &test_head) {
+		if (nr_expect-- < 0)
+			break;
+		if (node_pos == first)
+			continue;
+		if (node_pos->prio == prio_pos->prio) {
+			BUG_ON(!list_empty(&node_pos->prio_list));
+			continue;
+		}
+
+		BUG_ON(prio_pos->prio > node_pos->prio);
+		BUG_ON(prio_pos->prio_list.next != &node_pos->prio_list);
+		prio_pos = node_pos;
+	}
+
+	BUG_ON(nr_expect != 0);
+	BUG_ON(prio_pos->prio_list.next != &first->prio_list);
+}
+
+static void __init plist_test_requeue(struct plist_node *node)
+{
+	plist_requeue(node, &test_head);
+
+	if (node != plist_last(&test_head))
+		BUG_ON(node->prio == plist_next(node)->prio);
+}
+
+static int  __init plist_test(void)
+{
+	int nr_expect = 0, i, loop;
+	unsigned int r = local_clock();
+
+	printk(KERN_DEBUG "start plist test\n");
+	plist_head_init(&test_head);
+	for (i = 0; i < ARRAY_SIZE(test_node); i++)
+		plist_node_init(test_node + i, 0);
+
+	for (loop = 0; loop < 1000; loop++) {
+		r = r * 193939 % 47629;
+		i = r % ARRAY_SIZE(test_node);
+		if (plist_node_empty(test_node + i)) {
+			r = r * 193939 % 47629;
+			test_node[i].prio = r % 99;
+			plist_add(test_node + i, &test_head);
+			nr_expect++;
+		} else {
+			plist_del(test_node + i, &test_head);
+			nr_expect--;
+		}
+		plist_test_check(nr_expect);
+		if (!plist_node_empty(test_node + i)) {
+			plist_test_requeue(test_node + i);
+			plist_test_check(nr_expect);
+		}
+	}
+
+	for (i = 0; i < ARRAY_SIZE(test_node); i++) {
+		if (plist_node_empty(test_node + i))
+			continue;
+		plist_del(test_node + i, &test_head);
+		nr_expect--;
+		plist_test_check(nr_expect);
+	}
+
+	printk(KERN_DEBUG "end plist test\n");
+	return 0;
+}
+
+module_init(plist_test);
+
+#endif