Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 219 insertions, 0 deletions

diff --git a/lib/test_linear_ranges.c b/lib/test_linear_ranges.c
new file mode 100644
index 000000000..c18f9c0f1
--- /dev/null
+++ b/lib/test_linear_ranges.c
@@ -0,0 +1,219 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * KUnit test for the linear_ranges helper.
+ *
+ * Copyright (C) 2020, ROHM Semiconductors.
+ * Author: Matti Vaittinen <matti.vaittien@fi.rohmeurope.com>
+ */
+#include <kunit/test.h>
+
+#include <linux/linear_range.h>
+
+/* First things first. I deeply dislike unit-tests. I have seen all the hell
+ * breaking loose when people who think the unit tests are "the silver bullet"
+ * to kill bugs get to decide how a company should implement testing strategy...
+ *
+ * Believe me, it may get _really_ ridiculous. It is tempting to think that
+ * walking through all the possible execution branches will nail down 100% of
+ * bugs. This may lead to ideas about demands to get certain % of "test
+ * coverage" - measured as line coverage. And that is one of the worst things
+ * you can do.
+ *
+ * Ask people to provide line coverage and they do. I've seen clever tools
+ * which generate test cases to test the existing functions - and by default
+ * these tools expect code to be correct and just generate checks which are
+ * passing when ran against current code-base. Run this generator and you'll get
+ * tests that do not test code is correct but just verify nothing changes.
+ * Problem is that testing working code is pointless. And if it is not
+ * working, your test must not assume it is working. You won't catch any bugs
+ * by such tests. What you can do is to generate a huge amount of tests.
+ * Especially if you were are asked to proivde 100% line-coverage x_x. So what
+ * does these tests - which are not finding any bugs now - do?
+ *
+ * They add inertia to every future development. I think it was Terry Pratchet
+ * who wrote someone having same impact as thick syrup has to chronometre.
+ * Excessive amount of unit-tests have this effect to development. If you do
+ * actually find _any_ bug from code in such environment and try fixing it...
+ * ...chances are you also need to fix the test cases. In sunny day you fix one
+ * test. But I've done refactoring which resulted 500+ broken tests (which had
+ * really zero value other than proving to managers that we do do "quality")...
+ *
+ * After this being said - there are situations where UTs can be handy. If you
+ * have algorithms which take some input and should produce output - then you
+ * can implement few, carefully selected simple UT-cases which test this. I've
+ * previously used this for example for netlink and device-tree data parsing
+ * functions. Feed some data examples to functions and verify the output is as
+ * expected. I am not covering all the cases but I will see the logic should be
+ * working.
+ *
+ * Here we also do some minor testing. I don't want to go through all branches
+ * or test more or less obvious things - but I want to see the main logic is
+ * working. And I definitely don't want to add 500+ test cases that break when
+ * some simple fix is done x_x. So - let's only add few, well selected tests
+ * which ensure as much logic is good as possible.
+ */
+
+/*
+ * Test Range 1:
+ * selectors:	2	3	4	5	6
+ * values (5):	10	20	30	40	50
+ *
+ * Test Range 2:
+ * selectors:	7	8	9	10
+ * values (4):	100	150	200	250
+ */
+
+#define RANGE1_MIN 10
+#define RANGE1_MIN_SEL 2
+#define RANGE1_STEP 10
+
+/* 2, 3, 4, 5, 6 */
+static const unsigned int range1_sels[] = { RANGE1_MIN_SEL, RANGE1_MIN_SEL + 1,
+					    RANGE1_MIN_SEL + 2,
+					    RANGE1_MIN_SEL + 3,
+					    RANGE1_MIN_SEL + 4 };
+/* 10, 20, 30, 40, 50 */
+static const unsigned int range1_vals[] = { RANGE1_MIN, RANGE1_MIN +
+					    RANGE1_STEP,
+					    RANGE1_MIN + RANGE1_STEP * 2,
+					    RANGE1_MIN + RANGE1_STEP * 3,
+					    RANGE1_MIN + RANGE1_STEP * 4 };
+
+#define RANGE2_MIN 100
+#define RANGE2_MIN_SEL 7
+#define RANGE2_STEP 50
+
+/*  7, 8, 9, 10 */
+static const unsigned int range2_sels[] = { RANGE2_MIN_SEL, RANGE2_MIN_SEL + 1,
+					    RANGE2_MIN_SEL + 2,
+					    RANGE2_MIN_SEL + 3 };
+/* 100, 150, 200, 250 */
+static const unsigned int range2_vals[] = { RANGE2_MIN, RANGE2_MIN +
+					    RANGE2_STEP,
+					    RANGE2_MIN + RANGE2_STEP * 2,
+					    RANGE2_MIN + RANGE2_STEP * 3 };
+
+#define RANGE1_NUM_VALS (ARRAY_SIZE(range1_vals))
+#define RANGE2_NUM_VALS (ARRAY_SIZE(range2_vals))
+#define RANGE_NUM_VALS (RANGE1_NUM_VALS + RANGE2_NUM_VALS)
+
+#define RANGE1_MAX_SEL (RANGE1_MIN_SEL + RANGE1_NUM_VALS - 1)
+#define RANGE1_MAX_VAL (range1_vals[RANGE1_NUM_VALS - 1])
+
+#define RANGE2_MAX_SEL (RANGE2_MIN_SEL + RANGE2_NUM_VALS - 1)
+#define RANGE2_MAX_VAL (range2_vals[RANGE2_NUM_VALS - 1])
+
+#define SMALLEST_SEL RANGE1_MIN_SEL
+#define SMALLEST_VAL RANGE1_MIN
+
+static struct linear_range testr[] = {
+	LINEAR_RANGE(RANGE1_MIN, RANGE1_MIN_SEL, RANGE1_MAX_SEL, RANGE1_STEP),
+	LINEAR_RANGE(RANGE2_MIN, RANGE2_MIN_SEL, RANGE2_MAX_SEL, RANGE2_STEP),
+};
+
+static void range_test_get_value(struct kunit *test)
+{
+	int ret, i;
+	unsigned int sel, val;
+
+	for (i = 0; i < RANGE1_NUM_VALS; i++) {
+		sel = range1_sels[i];
+		ret = linear_range_get_value_array(&testr[0], 2, sel, &val);
+		KUNIT_EXPECT_EQ(test, 0, ret);
+		KUNIT_EXPECT_EQ(test, val, range1_vals[i]);
+	}
+	for (i = 0; i < RANGE2_NUM_VALS; i++) {
+		sel = range2_sels[i];
+		ret = linear_range_get_value_array(&testr[0], 2, sel, &val);
+		KUNIT_EXPECT_EQ(test, 0, ret);
+		KUNIT_EXPECT_EQ(test, val, range2_vals[i]);
+	}
+	ret = linear_range_get_value_array(&testr[0], 2, sel + 1, &val);
+	KUNIT_EXPECT_NE(test, 0, ret);
+}
+
+static void range_test_get_selector_high(struct kunit *test)
+{
+	int ret, i;
+	unsigned int sel;
+	bool found;
+
+	for (i = 0; i < RANGE1_NUM_VALS; i++) {
+		ret = linear_range_get_selector_high(&testr[0], range1_vals[i],
+						     &sel, &found);
+		KUNIT_EXPECT_EQ(test, 0, ret);
+		KUNIT_EXPECT_EQ(test, sel, range1_sels[i]);
+		KUNIT_EXPECT_TRUE(test, found);
+	}
+
+	ret = linear_range_get_selector_high(&testr[0], RANGE1_MAX_VAL + 1,
+					     &sel, &found);
+	KUNIT_EXPECT_LE(test, ret, 0);
+
+	ret = linear_range_get_selector_high(&testr[0], RANGE1_MIN - 1,
+					     &sel, &found);
+	KUNIT_EXPECT_EQ(test, 0, ret);
+	KUNIT_EXPECT_FALSE(test, found);
+	KUNIT_EXPECT_EQ(test, sel, range1_sels[0]);
+}
+
+static void range_test_get_value_amount(struct kunit *test)
+{
+	int ret;
+
+	ret = linear_range_values_in_range_array(&testr[0], 2);
+	KUNIT_EXPECT_EQ(test, (int)RANGE_NUM_VALS, ret);
+}
+
+static void range_test_get_selector_low(struct kunit *test)
+{
+	int i, ret;
+	unsigned int sel;
+	bool found;
+
+	for (i = 0; i < RANGE1_NUM_VALS; i++) {
+		ret = linear_range_get_selector_low_array(&testr[0], 2,
+							  range1_vals[i], &sel,
+							  &found);
+		KUNIT_EXPECT_EQ(test, 0, ret);
+		KUNIT_EXPECT_EQ(test, sel, range1_sels[i]);
+		KUNIT_EXPECT_TRUE(test, found);
+	}
+	for (i = 0; i < RANGE2_NUM_VALS; i++) {
+		ret = linear_range_get_selector_low_array(&testr[0], 2,
+							  range2_vals[i], &sel,
+							  &found);
+		KUNIT_EXPECT_EQ(test, 0, ret);
+		KUNIT_EXPECT_EQ(test, sel, range2_sels[i]);
+		KUNIT_EXPECT_TRUE(test, found);
+	}
+
+	/*
+	 * Seek value greater than range max => get_selector_*_low should
+	 * return Ok - but set found to false as value is not in range
+	 */
+	ret = linear_range_get_selector_low_array(&testr[0], 2,
+					range2_vals[RANGE2_NUM_VALS - 1] + 1,
+					&sel, &found);
+
+	KUNIT_EXPECT_EQ(test, 0, ret);
+	KUNIT_EXPECT_EQ(test, sel, range2_sels[RANGE2_NUM_VALS - 1]);
+	KUNIT_EXPECT_FALSE(test, found);
+}
+
+static struct kunit_case range_test_cases[] = {
+	KUNIT_CASE(range_test_get_value_amount),
+	KUNIT_CASE(range_test_get_selector_high),
+	KUNIT_CASE(range_test_get_selector_low),
+	KUNIT_CASE(range_test_get_value),
+	{},
+};
+
+static struct kunit_suite range_test_module = {
+	.name = "linear-ranges-test",
+	.test_cases = range_test_cases,
+};
+
+kunit_test_suites(&range_test_module);
+
+MODULE_LICENSE("GPL");