Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 465 insertions, 0 deletions

diff --git a/samples/uhid/uhid-example.c b/samples/uhid/uhid-example.c
new file mode 100644
index 000000000..015cb06a2
--- /dev/null
+++ b/samples/uhid/uhid-example.c
@@ -0,0 +1,465 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * UHID Example
+ *
+ * Copyright (c) 2012-2013 David Herrmann <dh.herrmann@gmail.com>
+ *
+ * The code may be used by anyone for any purpose,
+ * and can serve as a starting point for developing
+ * applications using uhid.
+ */
+
+/*
+ * UHID Example
+ * This example emulates a basic 3 buttons mouse with wheel over UHID. Run this
+ * program as root and then use the following keys to control the mouse:
+ *   q: Quit the application
+ *   1: Toggle left button (down, up, ...)
+ *   2: Toggle right button
+ *   3: Toggle middle button
+ *   a: Move mouse left
+ *   d: Move mouse right
+ *   w: Move mouse up
+ *   s: Move mouse down
+ *   r: Move wheel up
+ *   f: Move wheel down
+ *
+ * Additionally to 3 button mouse, 3 keyboard LEDs are also supported (LED_NUML,
+ * LED_CAPSL and LED_SCROLLL). The device doesn't generate any related keyboard
+ * events, though. You need to manually write the EV_LED/LED_XY/1 activation
+ * input event to the evdev device to see it being sent to this device.
+ *
+ * If uhid is not available as /dev/uhid, then you can pass a different path as
+ * first argument.
+ * If <linux/uhid.h> is not installed in /usr, then compile this with:
+ *   gcc -o ./uhid_test -Wall -I./include ./samples/uhid/uhid-example.c
+ * And ignore the warning about kernel headers. However, it is recommended to
+ * use the installed uhid.h if available.
+ */
+
+#include <errno.h>
+#include <fcntl.h>
+#include <poll.h>
+#include <stdbool.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <termios.h>
+#include <unistd.h>
+#include <linux/uhid.h>
+
+/*
+ * HID Report Desciptor
+ * We emulate a basic 3 button mouse with wheel and 3 keyboard LEDs. This is
+ * the report-descriptor as the kernel will parse it:
+ *
+ * INPUT(1)[INPUT]
+ *   Field(0)
+ *     Physical(GenericDesktop.Pointer)
+ *     Application(GenericDesktop.Mouse)
+ *     Usage(3)
+ *       Button.0001
+ *       Button.0002
+ *       Button.0003
+ *     Logical Minimum(0)
+ *     Logical Maximum(1)
+ *     Report Size(1)
+ *     Report Count(3)
+ *     Report Offset(0)
+ *     Flags( Variable Absolute )
+ *   Field(1)
+ *     Physical(GenericDesktop.Pointer)
+ *     Application(GenericDesktop.Mouse)
+ *     Usage(3)
+ *       GenericDesktop.X
+ *       GenericDesktop.Y
+ *       GenericDesktop.Wheel
+ *     Logical Minimum(-128)
+ *     Logical Maximum(127)
+ *     Report Size(8)
+ *     Report Count(3)
+ *     Report Offset(8)
+ *     Flags( Variable Relative )
+ * OUTPUT(2)[OUTPUT]
+ *   Field(0)
+ *     Application(GenericDesktop.Keyboard)
+ *     Usage(3)
+ *       LED.NumLock
+ *       LED.CapsLock
+ *       LED.ScrollLock
+ *     Logical Minimum(0)
+ *     Logical Maximum(1)
+ *     Report Size(1)
+ *     Report Count(3)
+ *     Report Offset(0)
+ *     Flags( Variable Absolute )
+ *
+ * This is the mapping that we expect:
+ *   Button.0001 ---> Key.LeftBtn
+ *   Button.0002 ---> Key.RightBtn
+ *   Button.0003 ---> Key.MiddleBtn
+ *   GenericDesktop.X ---> Relative.X
+ *   GenericDesktop.Y ---> Relative.Y
+ *   GenericDesktop.Wheel ---> Relative.Wheel
+ *   LED.NumLock ---> LED.NumLock
+ *   LED.CapsLock ---> LED.CapsLock
+ *   LED.ScrollLock ---> LED.ScrollLock
+ *
+ * This information can be verified by reading /sys/kernel/debug/hid/<dev>/rdesc
+ * This file should print the same information as showed above.
+ */
+
+static unsigned char rdesc[] = {
+	0x05, 0x01,	/* USAGE_PAGE (Generic Desktop) */
+	0x09, 0x02,	/* USAGE (Mouse) */
+	0xa1, 0x01,	/* COLLECTION (Application) */
+	0x09, 0x01,		/* USAGE (Pointer) */
+	0xa1, 0x00,		/* COLLECTION (Physical) */
+	0x85, 0x01,			/* REPORT_ID (1) */
+	0x05, 0x09,			/* USAGE_PAGE (Button) */
+	0x19, 0x01,			/* USAGE_MINIMUM (Button 1) */
+	0x29, 0x03,			/* USAGE_MAXIMUM (Button 3) */
+	0x15, 0x00,			/* LOGICAL_MINIMUM (0) */
+	0x25, 0x01,			/* LOGICAL_MAXIMUM (1) */
+	0x95, 0x03,			/* REPORT_COUNT (3) */
+	0x75, 0x01,			/* REPORT_SIZE (1) */
+	0x81, 0x02,			/* INPUT (Data,Var,Abs) */
+	0x95, 0x01,			/* REPORT_COUNT (1) */
+	0x75, 0x05,			/* REPORT_SIZE (5) */
+	0x81, 0x01,			/* INPUT (Cnst,Var,Abs) */
+	0x05, 0x01,			/* USAGE_PAGE (Generic Desktop) */
+	0x09, 0x30,			/* USAGE (X) */
+	0x09, 0x31,			/* USAGE (Y) */
+	0x09, 0x38,			/* USAGE (WHEEL) */
+	0x15, 0x81,			/* LOGICAL_MINIMUM (-127) */
+	0x25, 0x7f,			/* LOGICAL_MAXIMUM (127) */
+	0x75, 0x08,			/* REPORT_SIZE (8) */
+	0x95, 0x03,			/* REPORT_COUNT (3) */
+	0x81, 0x06,			/* INPUT (Data,Var,Rel) */
+	0xc0,			/* END_COLLECTION */
+	0xc0,		/* END_COLLECTION */
+	0x05, 0x01,	/* USAGE_PAGE (Generic Desktop) */
+	0x09, 0x06,	/* USAGE (Keyboard) */
+	0xa1, 0x01,	/* COLLECTION (Application) */
+	0x85, 0x02,		/* REPORT_ID (2) */
+	0x05, 0x08,		/* USAGE_PAGE (Led) */
+	0x19, 0x01,		/* USAGE_MINIMUM (1) */
+	0x29, 0x03,		/* USAGE_MAXIMUM (3) */
+	0x15, 0x00,		/* LOGICAL_MINIMUM (0) */
+	0x25, 0x01,		/* LOGICAL_MAXIMUM (1) */
+	0x95, 0x03,		/* REPORT_COUNT (3) */
+	0x75, 0x01,		/* REPORT_SIZE (1) */
+	0x91, 0x02,		/* Output (Data,Var,Abs) */
+	0x95, 0x01,		/* REPORT_COUNT (1) */
+	0x75, 0x05,		/* REPORT_SIZE (5) */
+	0x91, 0x01,		/* Output (Cnst,Var,Abs) */
+	0xc0,		/* END_COLLECTION */
+};
+
+static int uhid_write(int fd, const struct uhid_event *ev)
+{
+	ssize_t ret;
+
+	ret = write(fd, ev, sizeof(*ev));
+	if (ret < 0) {
+		fprintf(stderr, "Cannot write to uhid: %m\n");
+		return -errno;
+	} else if (ret != sizeof(*ev)) {
+		fprintf(stderr, "Wrong size written to uhid: %zd != %zu\n",
+			ret, sizeof(ev));
+		return -EFAULT;
+	} else {
+		return 0;
+	}
+}
+
+static int create(int fd)
+{
+	struct uhid_event ev;
+
+	memset(&ev, 0, sizeof(ev));
+	ev.type = UHID_CREATE;
+	strcpy((char*)ev.u.create.name, "test-uhid-device");
+	ev.u.create.rd_data = rdesc;
+	ev.u.create.rd_size = sizeof(rdesc);
+	ev.u.create.bus = BUS_USB;
+	ev.u.create.vendor = 0x15d9;
+	ev.u.create.product = 0x0a37;
+	ev.u.create.version = 0;
+	ev.u.create.country = 0;
+
+	return uhid_write(fd, &ev);
+}
+
+static void destroy(int fd)
+{
+	struct uhid_event ev;
+
+	memset(&ev, 0, sizeof(ev));
+	ev.type = UHID_DESTROY;
+
+	uhid_write(fd, &ev);
+}
+
+/* This parses raw output reports sent by the kernel to the device. A normal
+ * uhid program shouldn't do this but instead just forward the raw report.
+ * However, for ducomentational purposes, we try to detect LED events here and
+ * print debug messages for it. */
+static void handle_output(struct uhid_event *ev)
+{
+	/* LED messages are adverised via OUTPUT reports; ignore the rest */
+	if (ev->u.output.rtype != UHID_OUTPUT_REPORT)
+		return;
+	/* LED reports have length 2 bytes */
+	if (ev->u.output.size != 2)
+		return;
+	/* first byte is report-id which is 0x02 for LEDs in our rdesc */
+	if (ev->u.output.data[0] != 0x2)
+		return;
+
+	/* print flags payload */
+	fprintf(stderr, "LED output report received with flags %x\n",
+		ev->u.output.data[1]);
+}
+
+static int event(int fd)
+{
+	struct uhid_event ev;
+	ssize_t ret;
+
+	memset(&ev, 0, sizeof(ev));
+	ret = read(fd, &ev, sizeof(ev));
+	if (ret == 0) {
+		fprintf(stderr, "Read HUP on uhid-cdev\n");
+		return -EFAULT;
+	} else if (ret < 0) {
+		fprintf(stderr, "Cannot read uhid-cdev: %m\n");
+		return -errno;
+	} else if (ret != sizeof(ev)) {
+		fprintf(stderr, "Invalid size read from uhid-dev: %zd != %zu\n",
+			ret, sizeof(ev));
+		return -EFAULT;
+	}
+
+	switch (ev.type) {
+	case UHID_START:
+		fprintf(stderr, "UHID_START from uhid-dev\n");
+		break;
+	case UHID_STOP:
+		fprintf(stderr, "UHID_STOP from uhid-dev\n");
+		break;
+	case UHID_OPEN:
+		fprintf(stderr, "UHID_OPEN from uhid-dev\n");
+		break;
+	case UHID_CLOSE:
+		fprintf(stderr, "UHID_CLOSE from uhid-dev\n");
+		break;
+	case UHID_OUTPUT:
+		fprintf(stderr, "UHID_OUTPUT from uhid-dev\n");
+		handle_output(&ev);
+		break;
+	case UHID_OUTPUT_EV:
+		fprintf(stderr, "UHID_OUTPUT_EV from uhid-dev\n");
+		break;
+	default:
+		fprintf(stderr, "Invalid event from uhid-dev: %u\n", ev.type);
+	}
+
+	return 0;
+}
+
+static bool btn1_down;
+static bool btn2_down;
+static bool btn3_down;
+static signed char abs_hor;
+static signed char abs_ver;
+static signed char wheel;
+
+static int send_event(int fd)
+{
+	struct uhid_event ev;
+
+	memset(&ev, 0, sizeof(ev));
+	ev.type = UHID_INPUT;
+	ev.u.input.size = 5;
+
+	ev.u.input.data[0] = 0x1;
+	if (btn1_down)
+		ev.u.input.data[1] |= 0x1;
+	if (btn2_down)
+		ev.u.input.data[1] |= 0x2;
+	if (btn3_down)
+		ev.u.input.data[1] |= 0x4;
+
+	ev.u.input.data[2] = abs_hor;
+	ev.u.input.data[3] = abs_ver;
+	ev.u.input.data[4] = wheel;
+
+	return uhid_write(fd, &ev);
+}
+
+static int keyboard(int fd)
+{
+	char buf[128];
+	ssize_t ret, i;
+
+	ret = read(STDIN_FILENO, buf, sizeof(buf));
+	if (ret == 0) {
+		fprintf(stderr, "Read HUP on stdin\n");
+		return -EFAULT;
+	} else if (ret < 0) {
+		fprintf(stderr, "Cannot read stdin: %m\n");
+		return -errno;
+	}
+
+	for (i = 0; i < ret; ++i) {
+		switch (buf[i]) {
+		case '1':
+			btn1_down = !btn1_down;
+			ret = send_event(fd);
+			if (ret)
+				return ret;
+			break;
+		case '2':
+			btn2_down = !btn2_down;
+			ret = send_event(fd);
+			if (ret)
+				return ret;
+			break;
+		case '3':
+			btn3_down = !btn3_down;
+			ret = send_event(fd);
+			if (ret)
+				return ret;
+			break;
+		case 'a':
+			abs_hor = -20;
+			ret = send_event(fd);
+			abs_hor = 0;
+			if (ret)
+				return ret;
+			break;
+		case 'd':
+			abs_hor = 20;
+			ret = send_event(fd);
+			abs_hor = 0;
+			if (ret)
+				return ret;
+			break;
+		case 'w':
+			abs_ver = -20;
+			ret = send_event(fd);
+			abs_ver = 0;
+			if (ret)
+				return ret;
+			break;
+		case 's':
+			abs_ver = 20;
+			ret = send_event(fd);
+			abs_ver = 0;
+			if (ret)
+				return ret;
+			break;
+		case 'r':
+			wheel = 1;
+			ret = send_event(fd);
+			wheel = 0;
+			if (ret)
+				return ret;
+			break;
+		case 'f':
+			wheel = -1;
+			ret = send_event(fd);
+			wheel = 0;
+			if (ret)
+				return ret;
+			break;
+		case 'q':
+			return -ECANCELED;
+		default:
+			fprintf(stderr, "Invalid input: %c\n", buf[i]);
+		}
+	}
+
+	return 0;
+}
+
+int main(int argc, char **argv)
+{
+	int fd;
+	const char *path = "/dev/uhid";
+	struct pollfd pfds[2];
+	int ret;
+	struct termios state;
+
+	ret = tcgetattr(STDIN_FILENO, &state);
+	if (ret) {
+		fprintf(stderr, "Cannot get tty state\n");
+	} else {
+		state.c_lflag &= ~ICANON;
+		state.c_cc[VMIN] = 1;
+		ret = tcsetattr(STDIN_FILENO, TCSANOW, &state);
+		if (ret)
+			fprintf(stderr, "Cannot set tty state\n");
+	}
+
+	if (argc >= 2) {
+		if (!strcmp(argv[1], "-h") || !strcmp(argv[1], "--help")) {
+			fprintf(stderr, "Usage: %s [%s]\n", argv[0], path);
+			return EXIT_SUCCESS;
+		} else {
+			path = argv[1];
+		}
+	}
+
+	fprintf(stderr, "Open uhid-cdev %s\n", path);
+	fd = open(path, O_RDWR | O_CLOEXEC);
+	if (fd < 0) {
+		fprintf(stderr, "Cannot open uhid-cdev %s: %m\n", path);
+		return EXIT_FAILURE;
+	}
+
+	fprintf(stderr, "Create uhid device\n");
+	ret = create(fd);
+	if (ret) {
+		close(fd);
+		return EXIT_FAILURE;
+	}
+
+	pfds[0].fd = STDIN_FILENO;
+	pfds[0].events = POLLIN;
+	pfds[1].fd = fd;
+	pfds[1].events = POLLIN;
+
+	fprintf(stderr, "Press 'q' to quit...\n");
+	while (1) {
+		ret = poll(pfds, 2, -1);
+		if (ret < 0) {
+			fprintf(stderr, "Cannot poll for fds: %m\n");
+			break;
+		}
+		if (pfds[0].revents & POLLHUP) {
+			fprintf(stderr, "Received HUP on stdin\n");
+			break;
+		}
+		if (pfds[1].revents & POLLHUP) {
+			fprintf(stderr, "Received HUP on uhid-cdev\n");
+			break;
+		}
+
+		if (pfds[0].revents & POLLIN) {
+			ret = keyboard(fd);
+			if (ret)
+				break;
+		}
+		if (pfds[1].revents & POLLIN) {
+			ret = event(fd);
+			if (ret)
+				break;
+		}
+	}
+
+	fprintf(stderr, "Destroy uhid device\n");
+	destroy(fd);
+	return EXIT_SUCCESS;
+}