Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 295 insertions, 0 deletions

diff --git a/scripts/faddr2line b/scripts/faddr2line
new file mode 100755
index 000000000..0e73aca4f
--- /dev/null
+++ b/scripts/faddr2line
@@ -0,0 +1,295 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Translate stack dump function offsets.
+#
+# addr2line doesn't work with KASLR addresses.  This works similarly to
+# addr2line, but instead takes the 'func+0x123' format as input:
+#
+#   $ ./scripts/faddr2line ~/k/vmlinux meminfo_proc_show+0x5/0x568
+#   meminfo_proc_show+0x5/0x568:
+#   meminfo_proc_show at fs/proc/meminfo.c:27
+#
+# If the address is part of an inlined function, the full inline call chain is
+# printed:
+#
+#   $ ./scripts/faddr2line ~/k/vmlinux native_write_msr+0x6/0x27
+#   native_write_msr+0x6/0x27:
+#   arch_static_branch at arch/x86/include/asm/msr.h:121
+#    (inlined by) static_key_false at include/linux/jump_label.h:125
+#    (inlined by) native_write_msr at arch/x86/include/asm/msr.h:125
+#
+# The function size after the '/' in the input is optional, but recommended.
+# It's used to help disambiguate any duplicate symbol names, which can occur
+# rarely.  If the size is omitted for a duplicate symbol then it's possible for
+# multiple code sites to be printed:
+#
+#   $ ./scripts/faddr2line ~/k/vmlinux raw_ioctl+0x5
+#   raw_ioctl+0x5/0x20:
+#   raw_ioctl at drivers/char/raw.c:122
+#
+#   raw_ioctl+0x5/0xb1:
+#   raw_ioctl at net/ipv4/raw.c:876
+#
+# Multiple addresses can be specified on a single command line:
+#
+#   $ ./scripts/faddr2line ~/k/vmlinux type_show+0x10/45 free_reserved_area+0x90
+#   type_show+0x10/0x2d:
+#   type_show at drivers/video/backlight/backlight.c:213
+#
+#   free_reserved_area+0x90/0x123:
+#   free_reserved_area at mm/page_alloc.c:6429 (discriminator 2)
+
+
+set -o errexit
+set -o nounset
+
+usage() {
+	echo "usage: faddr2line [--list] <object file> <func+offset> <func+offset>..." >&2
+	exit 1
+}
+
+warn() {
+	echo "$1" >&2
+}
+
+die() {
+	echo "ERROR: $1" >&2
+	exit 1
+}
+
+READELF="${CROSS_COMPILE:-}readelf"
+ADDR2LINE="${CROSS_COMPILE:-}addr2line"
+AWK="awk"
+GREP="grep"
+
+command -v ${AWK} >/dev/null 2>&1 || die "${AWK} isn't installed"
+command -v ${READELF} >/dev/null 2>&1 || die "${READELF} isn't installed"
+command -v ${ADDR2LINE} >/dev/null 2>&1 || die "${ADDR2LINE} isn't installed"
+
+# Try to figure out the source directory prefix so we can remove it from the
+# addr2line output.  HACK ALERT: This assumes that start_kernel() is in
+# init/main.c!  This only works for vmlinux.  Otherwise it falls back to
+# printing the absolute path.
+find_dir_prefix() {
+	local objfile=$1
+
+	local start_kernel_addr=$(${READELF} --symbols --wide $objfile | sed 's/\[.*\]//' |
+		${AWK} '$8 == "start_kernel" {printf "0x%s", $2}')
+	[[ -z $start_kernel_addr ]] && return
+
+	local file_line=$(${ADDR2LINE} -e $objfile $start_kernel_addr)
+	[[ -z $file_line ]] && return
+
+	local prefix=${file_line%init/main.c:*}
+	if [[ -z $prefix ]] || [[ $prefix = $file_line ]]; then
+		return
+	fi
+
+	DIR_PREFIX=$prefix
+	return 0
+}
+
+__faddr2line() {
+	local objfile=$1
+	local func_addr=$2
+	local dir_prefix=$3
+	local print_warnings=$4
+
+	local sym_name=${func_addr%+*}
+	local func_offset=${func_addr#*+}
+	func_offset=${func_offset%/*}
+	local user_size=
+	local file_type
+	local is_vmlinux=0
+	[[ $func_addr =~ "/" ]] && user_size=${func_addr#*/}
+
+	if [[ -z $sym_name ]] || [[ -z $func_offset ]] || [[ $sym_name = $func_addr ]]; then
+		warn "bad func+offset $func_addr"
+		DONE=1
+		return
+	fi
+
+	# vmlinux uses absolute addresses in the section table rather than
+	# section offsets.
+	local file_type=$(${READELF} --file-header $objfile |
+		${AWK} '$1 == "Type:" { print $2; exit }')
+	if [[ $file_type = "EXEC" ]] || [[ $file_type == "DYN" ]]; then
+		is_vmlinux=1
+	fi
+
+	# Go through each of the object's symbols which match the func name.
+	# In rare cases there might be duplicates, in which case we print all
+	# matches.
+	while read line; do
+		local fields=($line)
+		local sym_addr=0x${fields[1]}
+		local sym_elf_size=${fields[2]}
+		local sym_sec=${fields[6]}
+		local sec_size
+		local sec_name
+
+		# Get the section size:
+		sec_size=$(${READELF} --section-headers --wide $objfile |
+			sed 's/\[ /\[/' |
+			${AWK} -v sec=$sym_sec '$1 == "[" sec "]" { print "0x" $6; exit }')
+
+		if [[ -z $sec_size ]]; then
+			warn "bad section size: section: $sym_sec"
+			DONE=1
+			return
+		fi
+
+		# Get the section name:
+		sec_name=$(${READELF} --section-headers --wide $objfile |
+			sed 's/\[ /\[/' |
+			${AWK} -v sec=$sym_sec '$1 == "[" sec "]" { print $2; exit }')
+
+		if [[ -z $sec_name ]]; then
+			warn "bad section name: section: $sym_sec"
+			DONE=1
+			return
+		fi
+
+		# Calculate the symbol size.
+		#
+		# Unfortunately we can't use the ELF size, because kallsyms
+		# also includes the padding bytes in its size calculation.  For
+		# kallsyms, the size calculation is the distance between the
+		# symbol and the next symbol in a sorted list.
+		local sym_size
+		local cur_sym_addr
+		local found=0
+		while read line; do
+			local fields=($line)
+			cur_sym_addr=0x${fields[1]}
+			local cur_sym_elf_size=${fields[2]}
+			local cur_sym_name=${fields[7]:-}
+
+			if [[ $cur_sym_addr = $sym_addr ]] &&
+			   [[ $cur_sym_elf_size = $sym_elf_size ]] &&
+			   [[ $cur_sym_name = $sym_name ]]; then
+				found=1
+				continue
+			fi
+
+			if [[ $found = 1 ]]; then
+				sym_size=$(($cur_sym_addr - $sym_addr))
+				[[ $sym_size -lt $sym_elf_size ]] && continue;
+				found=2
+				break
+			fi
+		done < <(${READELF} --symbols --wide $objfile | sed 's/\[.*\]//' | ${AWK} -v sec=$sym_sec '$7 == sec' | sort --key=2)
+
+		if [[ $found = 0 ]]; then
+			warn "can't find symbol: sym_name: $sym_name sym_sec: $sym_sec sym_addr: $sym_addr sym_elf_size: $sym_elf_size"
+			DONE=1
+			return
+		fi
+
+		# If nothing was found after the symbol, assume it's the last
+		# symbol in the section.
+		[[ $found = 1 ]] && sym_size=$(($sec_size - $sym_addr))
+
+		if [[ -z $sym_size ]] || [[ $sym_size -le 0 ]]; then
+			warn "bad symbol size: sym_addr: $sym_addr cur_sym_addr: $cur_sym_addr"
+			DONE=1
+			return
+		fi
+
+		sym_size=0x$(printf %x $sym_size)
+
+		# Calculate the address from user-supplied offset:
+		local addr=$(($sym_addr + $func_offset))
+		if [[ -z $addr ]] || [[ $addr = 0 ]]; then
+			warn "bad address: $sym_addr + $func_offset"
+			DONE=1
+			return
+		fi
+		addr=0x$(printf %x $addr)
+
+		# If the user provided a size, make sure it matches the symbol's size:
+		if [[ -n $user_size ]] && [[ $user_size -ne $sym_size ]]; then
+			[[ $print_warnings = 1 ]] &&
+				echo "skipping $sym_name address at $addr due to size mismatch ($user_size != $sym_size)"
+			continue;
+		fi
+
+		# Make sure the provided offset is within the symbol's range:
+		if [[ $func_offset -gt $sym_size ]]; then
+			[[ $print_warnings = 1 ]] &&
+				echo "skipping $sym_name address at $addr due to size mismatch ($func_offset > $sym_size)"
+			continue
+		fi
+
+		# In case of duplicates or multiple addresses specified on the
+		# cmdline, separate multiple entries with a blank line:
+		[[ $FIRST = 0 ]] && echo
+		FIRST=0
+
+		echo "$sym_name+$func_offset/$sym_size:"
+
+		# Pass section address to addr2line and strip absolute paths
+		# from the output:
+		local args="--functions --pretty-print --inlines --exe=$objfile"
+		[[ $is_vmlinux = 0 ]] && args="$args --section=$sec_name"
+		local output=$(${ADDR2LINE} $args $addr | sed "s; $dir_prefix\(\./\)*; ;")
+		[[ -z $output ]] && continue
+
+		# Default output (non --list):
+		if [[ $LIST = 0 ]]; then
+			echo "$output" | while read -r line
+			do
+				echo $line
+			done
+			DONE=1;
+			continue
+		fi
+
+		# For --list, show each line with its corresponding source code:
+		echo "$output" | while read -r line
+		do
+			echo
+			echo $line
+			n=$(echo $line | sed 's/.*:\([0-9]\+\).*/\1/g')
+			n1=$[$n-5]
+			n2=$[$n+5]
+			f=$(echo $line | sed 's/.*at \(.\+\):.*/\1/g')
+			${AWK} 'NR>=strtonum("'$n1'") && NR<=strtonum("'$n2'") { if (NR=='$n') printf(">%d<", NR); else printf(" %d ", NR); printf("\t%s\n", $0)}' $f
+		done
+
+		DONE=1
+
+	done < <(${READELF} --symbols --wide $objfile | sed 's/\[.*\]//' | ${AWK} -v fn=$sym_name '$4 == "FUNC" && $8 == fn')
+}
+
+[[ $# -lt 2 ]] && usage
+
+objfile=$1
+
+LIST=0
+[[ "$objfile" == "--list" ]] && LIST=1 && shift && objfile=$1
+
+[[ ! -f $objfile ]] && die "can't find objfile $objfile"
+shift
+
+${READELF} --section-headers --wide $objfile | ${GREP} -q '\.debug_info' || die "CONFIG_DEBUG_INFO not enabled"
+
+DIR_PREFIX=supercalifragilisticexpialidocious
+find_dir_prefix $objfile
+
+FIRST=1
+while [[ $# -gt 0 ]]; do
+	func_addr=$1
+	shift
+
+	# print any matches found
+	DONE=0
+	__faddr2line $objfile $func_addr $DIR_PREFIX 0
+
+	# if no match was found, print warnings
+	if [[ $DONE = 0 ]]; then
+		__faddr2line $objfile $func_addr $DIR_PREFIX 1
+		warn "no match for $func_addr"
+	fi
+done