Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 270 insertions, 0 deletions

diff --git a/scripts/generate_initcall_order.pl b/scripts/generate_initcall_order.pl
new file mode 100755
index 000000000..1a88d3f1b
--- /dev/null
+++ b/scripts/generate_initcall_order.pl
@@ -0,0 +1,270 @@
+#!/usr/bin/env perl
+# SPDX-License-Identifier: GPL-2.0
+#
+# Generates a linker script that specifies the correct initcall order.
+#
+# Copyright (C) 2019 Google LLC
+
+use strict;
+use warnings;
+use IO::Handle;
+use IO::Select;
+use POSIX ":sys_wait_h";
+
+my $nm = $ENV{'NM'} || die "$0: ERROR: NM not set?";
+my $objtree = $ENV{'objtree'} || '.';
+
+## currently active child processes
+my $jobs = {};		# child process pid -> file handle
+## results from child processes
+my $results = {};	# object index -> [ { level, secname }, ... ]
+
+## reads _NPROCESSORS_ONLN to determine the maximum number of processes to
+## start
+sub get_online_processors {
+	open(my $fh, "getconf _NPROCESSORS_ONLN 2>/dev/null |")
+		or die "$0: ERROR: failed to execute getconf: $!";
+	my $procs = <$fh>;
+	close($fh);
+
+	if (!($procs =~ /^\d+$/)) {
+		return 1;
+	}
+
+	return int($procs);
+}
+
+## writes results to the parent process
+## format: <file index> <initcall level> <base initcall section name>
+sub write_results {
+	my ($index, $initcalls) = @_;
+
+	# sort by the counter value to ensure the order of initcalls within
+	# each object file is correct
+	foreach my $counter (sort { $a <=> $b } keys(%{$initcalls})) {
+		my $level = $initcalls->{$counter}->{'level'};
+
+		# section name for the initcall function
+		my $secname = $initcalls->{$counter}->{'module'} . '__' .
+			      $counter . '_' .
+			      $initcalls->{$counter}->{'line'} . '_' .
+			      $initcalls->{$counter}->{'function'};
+
+		print "$index $level $secname\n";
+	}
+}
+
+## reads a result line from a child process and adds it to the $results array
+sub read_results{
+	my ($fh) = @_;
+
+	# each child prints out a full line w/ autoflush and exits after the
+	# last line, so even if buffered I/O blocks here, it shouldn't block
+	# very long
+	my $data = <$fh>;
+
+	if (!defined($data)) {
+		return 0;
+	}
+
+	chomp($data);
+
+	my ($index, $level, $secname) = $data =~
+		/^(\d+)\ ([^\ ]+)\ (.*)$/;
+
+	if (!defined($index) ||
+		!defined($level) ||
+		!defined($secname)) {
+		die "$0: ERROR: child process returned invalid data: $data\n";
+	}
+
+	$index = int($index);
+
+	if (!exists($results->{$index})) {
+		$results->{$index} = [];
+	}
+
+	push (@{$results->{$index}}, {
+		'level'   => $level,
+		'secname' => $secname
+	});
+
+	return 1;
+}
+
+## finds initcalls from an object file or all object files in an archive, and
+## writes results back to the parent process
+sub find_initcalls {
+	my ($index, $file) = @_;
+
+	die "$0: ERROR: file $file doesn't exist?" if (! -f $file);
+
+	open(my $fh, "\"$nm\" --defined-only \"$file\" 2>/dev/null |")
+		or die "$0: ERROR: failed to execute \"$nm\": $!";
+
+	my $initcalls = {};
+
+	while (<$fh>) {
+		chomp;
+
+		# check for the start of a new object file (if processing an
+		# archive)
+		my ($path)= $_ =~ /^(.+)\:$/;
+
+		if (defined($path)) {
+			write_results($index, $initcalls);
+			$initcalls = {};
+			next;
+		}
+
+		# look for an initcall
+		my ($module, $counter, $line, $symbol) = $_ =~
+			/[a-z]\s+__initcall__(\S*)__(\d+)_(\d+)_(.*)$/;
+
+		if (!defined($module)) {
+			$module = ''
+		}
+
+		if (!defined($counter) ||
+			!defined($line) ||
+			!defined($symbol)) {
+			next;
+		}
+
+		# parse initcall level
+		my ($function, $level) = $symbol =~
+			/^(.*)((early|rootfs|con|[0-9])s?)$/;
+
+		die "$0: ERROR: invalid initcall name $symbol in $file($path)"
+			if (!defined($function) || !defined($level));
+
+		$initcalls->{$counter} = {
+			'module'   => $module,
+			'line'     => $line,
+			'function' => $function,
+			'level'    => $level,
+		};
+	}
+
+	close($fh);
+	write_results($index, $initcalls);
+}
+
+## waits for any child process to complete, reads the results, and adds them to
+## the $results array for later processing
+sub wait_for_results {
+	my ($select) = @_;
+
+	my $pid = 0;
+	do {
+		# unblock children that may have a full write buffer
+		foreach my $fh ($select->can_read(0)) {
+			read_results($fh);
+		}
+
+		# check for children that have exited, read the remaining data
+		# from them, and clean up
+		$pid = waitpid(-1, WNOHANG);
+		if ($pid > 0) {
+			if (!exists($jobs->{$pid})) {
+				next;
+			}
+
+			my $fh = $jobs->{$pid};
+			$select->remove($fh);
+
+			while (read_results($fh)) {
+				# until eof
+			}
+
+			close($fh);
+			delete($jobs->{$pid});
+		}
+	} while ($pid > 0);
+}
+
+## forks a child to process each file passed in the command line and collects
+## the results
+sub process_files {
+	my $index = 0;
+	my $njobs = $ENV{'PARALLELISM'} || get_online_processors();
+	my $select = IO::Select->new();
+
+	while (my $file = shift(@ARGV)) {
+		# fork a child process and read it's stdout
+		my $pid = open(my $fh, '-|');
+
+		if (!defined($pid)) {
+			die "$0: ERROR: failed to fork: $!";
+		} elsif ($pid) {
+			# save the child process pid and the file handle
+			$select->add($fh);
+			$jobs->{$pid} = $fh;
+		} else {
+			# in the child process
+			STDOUT->autoflush(1);
+			find_initcalls($index, "$objtree/$file");
+			exit;
+		}
+
+		$index++;
+
+		# limit the number of children to $njobs
+		if (scalar(keys(%{$jobs})) >= $njobs) {
+			wait_for_results($select);
+		}
+	}
+
+	# wait for the remaining children to complete
+	while (scalar(keys(%{$jobs})) > 0) {
+		wait_for_results($select);
+	}
+}
+
+sub generate_initcall_lds() {
+	process_files();
+
+	my $sections = {};	# level -> [ secname, ...]
+
+	# sort results to retain link order and split to sections per
+	# initcall level
+	foreach my $index (sort { $a <=> $b } keys(%{$results})) {
+		foreach my $result (@{$results->{$index}}) {
+			my $level = $result->{'level'};
+
+			if (!exists($sections->{$level})) {
+				$sections->{$level} = [];
+			}
+
+			push(@{$sections->{$level}}, $result->{'secname'});
+		}
+	}
+
+	die "$0: ERROR: no initcalls?" if (!keys(%{$sections}));
+
+	# print out a linker script that defines the order of initcalls for
+	# each level
+	print "SECTIONS {\n";
+
+	foreach my $level (sort(keys(%{$sections}))) {
+		my $section;
+
+		if ($level eq 'con') {
+			$section = '.con_initcall.init';
+		} else {
+			$section = ".initcall${level}.init";
+		}
+
+		print "\t${section} : {\n";
+
+		foreach my $secname (@{$sections->{$level}}) {
+			print "\t\t*(${section}..${secname}) ;\n";
+		}
+
+		print "\t}\n";
+	}
+
+	print "}\n";
+}
+
+generate_initcall_lds();