Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 472 insertions, 0 deletions

diff --git a/sound/isa/Kconfig b/sound/isa/Kconfig
new file mode 100644
index 000000000..6ffa48dd5
--- /dev/null
+++ b/sound/isa/Kconfig
@@ -0,0 +1,472 @@
+# SPDX-License-Identifier: GPL-2.0-only
+# ALSA ISA drivers
+
+config SND_WSS_LIB
+	tristate
+	select SND_PCM
+	select SND_TIMER
+
+config SND_SB_COMMON
+	tristate
+
+config SND_SB8_DSP
+	tristate
+	select SND_PCM
+	select SND_SB_COMMON
+
+config SND_SB16_DSP
+	tristate
+	select SND_PCM
+	select SND_SB_COMMON
+
+menuconfig SND_ISA
+	bool "ISA sound devices"
+	depends on ISA || COMPILE_TEST
+	depends on ISA_DMA_API
+	default y
+	help
+	  Support for sound devices connected via the ISA bus.
+
+if SND_ISA
+
+config SND_ADLIB
+	tristate "AdLib FM card"
+	select SND_OPL3_LIB
+	help
+	  Say Y here to include support for AdLib FM cards.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called snd-adlib.
+
+config SND_AD1816A
+	tristate "Analog Devices SoundPort AD1816A"
+	depends on PNP
+	select ISAPNP
+	select SND_OPL3_LIB
+	select SND_MPU401_UART
+	select SND_PCM
+	select SND_TIMER
+	help
+	  Say Y here to include support for Analog Devices SoundPort
+	  AD1816A or compatible sound chips.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called snd-ad1816a.
+
+config SND_AD1848
+	tristate "Generic AD1848/CS4248 driver"
+	select SND_WSS_LIB
+	help
+	  Say Y here to include support for AD1848 (Analog Devices) or
+	  CS4248 (Cirrus Logic - Crystal Semiconductors) chips.
+	  
+	  For newer chips from Cirrus Logic, use the CS4231 or CS4232+
+	  drivers.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called snd-ad1848.
+
+config SND_ALS100
+	tristate "Diamond Tech. DT-019x and Avance Logic ALSxxx"
+	depends on PNP
+	select ISAPNP
+	select SND_OPL3_LIB
+	select SND_MPU401_UART
+	select SND_SB16_DSP
+	help
+	  Say Y here to include support for soundcards based on the
+	  Diamond Technologies DT-019X or Avance Logic chips: ALS007,
+	  ALS100, ALS110, ALS120 and ALS200 chips.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called snd-als100.
+
+config SND_AZT1605
+	tristate "Aztech AZT1605 Driver"
+	depends on SND
+	select SND_WSS_LIB
+	select SND_MPU401_UART
+	select SND_OPL3_LIB
+	help
+	  Say Y here to include support for Aztech Sound Galaxy cards
+	  based on the AZT1605 chipset.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called snd-azt1605.
+
+config SND_AZT2316
+	tristate "Aztech AZT2316 Driver"
+	depends on SND
+	select SND_WSS_LIB
+	select SND_MPU401_UART
+	select SND_OPL3_LIB
+	help
+	  Say Y here to include support for Aztech Sound Galaxy cards
+	  based on the AZT2316 chipset.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called snd-azt2316.
+
+config SND_AZT2320
+	tristate "Aztech Systems AZT2320"
+	depends on PNP
+	select ISAPNP
+	select SND_OPL3_LIB
+	select SND_MPU401_UART
+	select SND_WSS_LIB
+	help
+	  Say Y here to include support for soundcards based on the
+	  Aztech Systems AZT2320 chip.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called snd-azt2320.
+
+config SND_CMI8328
+	tristate "C-Media CMI8328"
+	select SND_WSS_LIB
+	select SND_OPL3_LIB
+	select SND_MPU401_UART
+	help
+	  Say Y here to include support for soundcards based on the
+	  C-Media CMI8328 chip.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called snd-cmi8328.
+
+config SND_CMI8330
+	tristate "C-Media CMI8330"
+	select SND_WSS_LIB
+	select SND_SB16_DSP
+	select SND_OPL3_LIB
+	select SND_MPU401_UART
+	help
+	  Say Y here to include support for soundcards based on the
+	  C-Media CMI8330 chip.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called snd-cmi8330.
+
+config SND_CS4231
+	tristate "Generic Cirrus Logic CS4231 driver"
+	select SND_MPU401_UART
+	select SND_WSS_LIB
+	help
+	  Say Y here to include support for CS4231 chips from Cirrus
+	  Logic - Crystal Semiconductors.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called snd-cs4231.
+
+config SND_CS4236
+	tristate "Generic Cirrus Logic CS4232/CS4236+ driver"
+	select SND_OPL3_LIB
+	select SND_MPU401_UART
+	select SND_WSS_LIB
+	help
+	  Say Y to include support for CS4232,CS4235,CS4236,CS4237B,
+	  CS4238B,CS4239 chips from Cirrus Logic - Crystal
+	  Semiconductors.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called snd-cs4236.
+
+config SND_ES1688
+	tristate "Generic ESS ES688/ES1688 and ES968 PnP driver"
+	select SND_OPL3_LIB
+	select SND_MPU401_UART
+	select SND_PCM
+	help
+	  Say Y here to include support for ESS AudioDrive ES688 or
+	  ES1688 chips. Also, this module support cards with ES968 PnP chip.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called snd-es1688.
+
+config SND_ES18XX
+	tristate "Generic ESS ES18xx driver"
+	select SND_OPL3_LIB
+	select SND_MPU401_UART
+	select SND_PCM
+	help
+	  Say Y here to include support for ESS AudioDrive ES18xx chips.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called snd-es18xx.
+
+config SND_SC6000
+	tristate "Gallant SC-6000/6600/7000 and Audio Excel DSP 16"
+	depends on HAS_IOPORT_MAP
+	select SND_WSS_LIB
+	select SND_OPL3_LIB
+	select SND_MPU401_UART
+	help
+	  Say Y here to include support for Gallant SC-6000, SC-6600, SC-7000
+	  cards and clones:
+	  Audio Excel DSP 16 and Zoltrix AV302.
+
+	  These cards are based on CompuMedia ASC-9308 or ASC-9408 chips.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called snd-sc6000.
+
+config SND_GUSCLASSIC
+	tristate "Gravis UltraSound Classic"
+	select SND_RAWMIDI
+	select SND_PCM
+	select SND_TIMER
+	help
+	  Say Y here to include support for Gravis UltraSound Classic
+	  soundcards.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called snd-gusclassic.
+
+config SND_GUSEXTREME
+	tristate "Gravis UltraSound Extreme"
+	select SND_OPL3_LIB
+	select SND_MPU401_UART
+	select SND_PCM
+	select SND_TIMER
+	help
+	  Say Y here to include support for Gravis UltraSound Extreme
+	  soundcards.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called snd-gusextreme.
+
+config SND_GUSMAX
+	tristate "Gravis UltraSound MAX"
+	select SND_RAWMIDI
+	select SND_WSS_LIB
+	help
+	  Say Y here to include support for Gravis UltraSound MAX
+	  soundcards.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called snd-gusmax.
+
+config SND_INTERWAVE
+	tristate "AMD InterWave, Gravis UltraSound PnP"
+	depends on PNP
+	select SND_RAWMIDI
+	select SND_WSS_LIB
+	help
+	  Say Y here to include support for AMD InterWave based
+	  soundcards (Gravis UltraSound Plug & Play, STB SoundRage32,
+	  MED3210, Dynasonic Pro, Panasonic PCA761AW).
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called snd-interwave.
+
+config SND_INTERWAVE_STB
+	tristate "AMD InterWave + TEA6330T (UltraSound 32-Pro)"
+	depends on PNP
+	select SND_RAWMIDI
+	select SND_WSS_LIB
+	help
+	  Say Y here to include support for AMD InterWave based
+	  soundcards with a TEA6330T bass and treble regulator
+	  (UltraSound 32-Pro).
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called snd-interwave-stb.
+
+config SND_JAZZ16
+	tristate "Media Vision Jazz16 card and compatibles"
+	select SND_OPL3_LIB
+	select SND_MPU401_UART
+	select SND_SB8_DSP
+	help
+	  Say Y here to include support for soundcards based on the
+	  Media Vision Jazz16 chipset: digital chip MVD1216 (Jazz16),
+	  codec MVA416 (CS4216) and mixer MVA514 (ICS2514).
+	  Media Vision's Jazz16 cards were sold under names Pro Sonic 16,
+	  Premium 3-D and Pro 3-D. There were also OEMs cards with the
+	  Jazz16 chipset.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called snd-jazz16.
+
+config SND_OPL3SA2
+	tristate "Yamaha OPL3-SA2/SA3"
+	select SND_OPL3_LIB
+	select SND_MPU401_UART
+	select SND_WSS_LIB
+	help
+	  Say Y here to include support for Yamaha OPL3-SA2 and OPL3-SA3
+	  chips.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called snd-opl3sa2.
+
+config SND_OPTI92X_AD1848
+	tristate "OPTi 82C92x - AD1848"
+	select SND_OPL3_LIB
+	select SND_OPL4_LIB
+	select SND_MPU401_UART
+	select SND_WSS_LIB
+	help
+	  Say Y here to include support for soundcards based on Opti
+	  82C92x or OTI-601 chips and using an AD1848 codec.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called snd-opti92x-ad1848.
+
+config SND_OPTI92X_CS4231
+	tristate "OPTi 82C92x - CS4231"
+	select SND_OPL3_LIB
+	select SND_OPL4_LIB
+	select SND_MPU401_UART
+	select SND_WSS_LIB
+	help
+	  Say Y here to include support for soundcards based on Opti
+	  82C92x chips and using a CS4231 codec.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called snd-opti92x-cs4231.
+
+config SND_OPTI93X
+	tristate "OPTi 82C93x"
+	select SND_OPL3_LIB
+	select SND_MPU401_UART
+	select SND_WSS_LIB
+	help
+	  Say Y here to include support for soundcards based on Opti
+	  82C93x chips.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called snd-opti93x.
+
+config SND_MIRO
+	tristate "Miro miroSOUND PCM1pro/PCM12/PCM20radio driver"
+	select SND_OPL4_LIB
+	select SND_WSS_LIB
+	select SND_MPU401_UART
+	select SND_PCM
+	help
+	  Say 'Y' or 'M' to include support for Miro miroSOUND PCM1 pro, 
+	  miroSOUND PCM12 and miroSOUND PCM20 Radio soundcards.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called snd-miro.
+
+config SND_SB8
+	tristate "Sound Blaster 1.0/2.0/Pro (8-bit)"
+	select SND_OPL3_LIB
+	select SND_RAWMIDI
+	select SND_SB8_DSP
+	help
+	  Say Y here to include support for Creative Sound Blaster 1.0/
+	  2.0/Pro (8-bit) or 100% compatible soundcards.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called snd-sb8.
+
+config SND_SB16
+	tristate "Sound Blaster 16 (PnP)"
+	select SND_OPL3_LIB
+	select SND_MPU401_UART
+	select SND_SB16_DSP
+	help
+	  Say Y here to include support for Sound Blaster 16 soundcards
+	  (including the Plug and Play version).
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called snd-sb16.
+
+config SND_SBAWE
+	tristate "Sound Blaster AWE (32,64) (PnP)"
+	select SND_OPL3_LIB
+	select SND_MPU401_UART
+	select SND_SB16_DSP
+	select SND_SEQ_DEVICE if SND_SEQUENCER != n
+	help
+	  Say Y here to include support for Sound Blaster AWE soundcards
+	  (including the Plug and Play version).
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called snd-sbawe.
+
+# select SEQ stuff to min(SND_SEQUENCER,SND_XXX)
+config SND_SBAWE_SEQ
+	def_tristate SND_SEQUENCER && SND_SBAWE
+	select SND_SEQ_MIDI_EMUL
+	select SND_SEQ_VIRMIDI
+	select SND_SYNTH_EMUX
+
+config SND_SB16_CSP
+	bool "Sound Blaster 16/AWE CSP support"
+	depends on (SND_SB16 || SND_SBAWE) && (BROKEN || !PPC)
+	select FW_LOADER
+	help
+	  Say Y here to include support for the CSP core.  This special
+	  coprocessor can do variable tasks like various compression and
+	  decompression algorithms.
+
+config SND_SSCAPE
+	tristate "Ensoniq SoundScape driver"
+	select SND_MPU401_UART
+	select SND_WSS_LIB
+	select FW_LOADER
+	help
+	  Say Y here to include support for Ensoniq SoundScape 
+	  and Ensoniq OEM soundcards.
+
+	  The PCM audio is supported on SoundScape Classic, Elite, PnP
+	  and VIVO cards. The supported OEM cards are SPEA Media FX and
+	  Reveal SC-600.
+	  The MIDI support is very experimental and requires binary
+	  firmware files called "scope.cod" and "sndscape.co?" where the
+	  ? is digit 0, 1, 2, 3 or 4. The firmware files can be found
+	  in DOS or Windows driver packages. One has to put the firmware
+	  files into the /lib/firmware directory.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called snd-sscape.
+
+config SND_WAVEFRONT
+	tristate "Turtle Beach Maui,Tropez,Tropez+ (Wavefront)"
+	select FW_LOADER
+	select SND_OPL3_LIB
+	select SND_MPU401_UART
+	select SND_WSS_LIB
+	help
+	  Say Y here to include support for Turtle Beach Maui, Tropez
+	  and Tropez+ soundcards based on the Wavefront chip.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called snd-wavefront.
+
+config SND_MSND_PINNACLE
+	tristate "Turtle Beach MultiSound Pinnacle/Fiji driver"
+	depends on X86
+	select FW_LOADER
+	select SND_MPU401_UART
+	select SND_PCM
+	help
+	  Say Y to include support for Turtle Beach MultiSound Pinnacle/
+	  Fiji soundcards.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called snd-msnd-pinnacle.
+
+config SND_MSND_CLASSIC
+	tristate "Support for Turtle Beach MultiSound Classic, Tahiti, Monterey"
+	depends on X86
+	select FW_LOADER
+	select SND_MPU401_UART
+	select SND_PCM
+	help
+	  Say M here if you have a Turtle Beach MultiSound Classic, Tahiti or
+	  Monterey (not for the Pinnacle or Fiji).
+
+	  See <file:Documentation/sound/cards/multisound.sh> for important information
+	  about this driver.  Note that it has been discontinued, but the
+	  Voyetra Turtle Beach knowledge base entry for it is still available
+	  at <http://www.turtlebeach.com/site/kb_ftp/790.asp>.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called snd-msnd-classic.
+
+endif	# SND_ISA
+