Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 307 insertions, 0 deletions

diff --git a/sound/pci/hda/Kconfig b/sound/pci/hda/Kconfig
new file mode 100644
index 000000000..06d304db4
--- /dev/null
+++ b/sound/pci/hda/Kconfig
@@ -0,0 +1,307 @@
+# SPDX-License-Identifier: GPL-2.0-only
+menu "HD-Audio"
+
+config SND_HDA
+	tristate
+	select SND_PCM
+	select SND_VMASTER
+	select SND_JACK
+	select SND_HDA_CORE
+
+config SND_HDA_GENERIC_LEDS
+       bool
+
+config SND_HDA_INTEL
+	tristate "HD Audio PCI"
+	depends on SND_PCI
+	select SND_HDA
+	select SND_INTEL_DSP_CONFIG
+	help
+	  Say Y here to include support for Intel "High Definition
+	  Audio" (Azalia) and its compatible devices.
+
+	  This option enables the HD-audio controller.  Don't forget
+	  to choose the appropriate codec options below.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called snd-hda-intel.
+
+config SND_HDA_TEGRA
+	tristate "NVIDIA Tegra HD Audio"
+	depends on ARCH_TEGRA
+	select SND_HDA
+	select SND_HDA_ALIGNED_MMIO
+	help
+	  Say Y here to support the HDA controller present in NVIDIA
+	  Tegra SoCs
+
+	  This options enables support for the HD Audio controller
+	  present in some NVIDIA Tegra SoCs, used to communicate audio
+	  to the HDMI output.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called snd-hda-tegra.
+
+if SND_HDA
+
+config SND_HDA_HWDEP
+	bool "Build hwdep interface for HD-audio driver"
+	select SND_HWDEP
+	help
+	  Say Y here to build a hwdep interface for HD-audio driver.
+	  This interface can be used for out-of-band communication
+	  with codecs for debugging purposes.
+
+config SND_HDA_RECONFIG
+	bool "Allow dynamic codec reconfiguration"
+	help
+	  Say Y here to enable the HD-audio codec re-configuration feature.
+	  It allows user to clear the whole codec configuration, change the
+	  codec setup, add extra verbs, and re-configure the codec dynamically.
+
+	  Note that this item alone doesn't provide the sysfs interface, but
+	  enables the feature just for the patch loader below.
+	  If you need the traditional sysfs entries for the manual interaction,
+	  turn on CONFIG_SND_HDA_HWDEP as well.
+
+config SND_HDA_INPUT_BEEP
+	bool "Support digital beep via input layer"
+	depends on INPUT=y || INPUT=SND_HDA
+	help
+	  Say Y here to build a digital beep interface for HD-audio
+	  driver. This interface is used to generate digital beeps.
+
+config SND_HDA_INPUT_BEEP_MODE
+	int "Digital beep registration mode (0=off, 1=on)"
+	depends on SND_HDA_INPUT_BEEP=y
+	default "1"
+	range 0 1
+	help
+	  Set 0 to disable the digital beep interface for HD-audio by default.
+	  Set 1 to always enable the digital beep interface for HD-audio by
+	  default.
+
+config SND_HDA_PATCH_LOADER
+	bool "Support initialization patch loading for HD-audio"
+	select FW_LOADER
+	select SND_HDA_RECONFIG
+	help
+	  Say Y here to allow the HD-audio driver to load a pseudo
+	  firmware file ("patch") for overriding the BIOS setup at
+	  start up.  The "patch" file can be specified via patch module
+	  option, such as patch=hda-init.
+
+config SND_HDA_SCODEC_CS35L41
+	tristate
+	select SND_HDA_GENERIC
+	select REGMAP_IRQ
+
+config SND_HDA_CS_DSP_CONTROLS
+	tristate
+	select FW_CS_DSP
+
+config SND_HDA_SCODEC_CS35L41_I2C
+	tristate "Build CS35L41 HD-audio side codec support for I2C Bus"
+	depends on I2C
+	depends on ACPI
+	depends on SND_SOC
+	select SND_SOC_CS35L41_LIB
+	select SND_HDA_SCODEC_CS35L41
+	select SND_HDA_CS_DSP_CONTROLS
+	help
+	  Say Y or M here to include CS35L41 I2C HD-audio side codec support
+	  in snd-hda-intel driver, such as ALC287.
+
+comment "Set to Y if you want auto-loading the side codec driver"
+	depends on SND_HDA=y && SND_HDA_SCODEC_CS35L41_I2C=m
+
+config SND_HDA_SCODEC_CS35L41_SPI
+	tristate "Build CS35L41 HD-audio codec support for SPI Bus"
+	depends on SPI_MASTER
+	depends on ACPI
+	depends on SND_SOC
+	select SND_SOC_CS35L41_LIB
+	select SND_HDA_SCODEC_CS35L41
+	select SND_HDA_CS_DSP_CONTROLS
+	help
+	  Say Y or M here to include CS35L41 SPI HD-audio side codec support
+	  in snd-hda-intel driver, such as ALC287.
+
+comment "Set to Y if you want auto-loading the side codec driver"
+	depends on SND_HDA=y && SND_HDA_SCODEC_CS35L41_SPI=m
+
+config SND_HDA_CODEC_REALTEK
+	tristate "Build Realtek HD-audio codec support"
+	select SND_HDA_GENERIC
+	select SND_HDA_GENERIC_LEDS
+	help
+	  Say Y or M here to include Realtek HD-audio codec support in
+	  snd-hda-intel driver, such as ALC880.
+
+comment "Set to Y if you want auto-loading the codec driver"
+	depends on SND_HDA=y && SND_HDA_CODEC_REALTEK=m
+
+config SND_HDA_CODEC_ANALOG
+	tristate "Build Analog Devices HD-audio codec support"
+	select SND_HDA_GENERIC
+	help
+	  Say Y or M here to include Analog Devices HD-audio codec support in
+	  snd-hda-intel driver, such as AD1986A.
+
+comment "Set to Y if you want auto-loading the codec driver"
+	depends on SND_HDA=y && SND_HDA_CODEC_ANALOG=m
+
+config SND_HDA_CODEC_SIGMATEL
+	tristate "Build IDT/Sigmatel HD-audio codec support"
+	select SND_HDA_GENERIC
+	select SND_HDA_GENERIC_LEDS
+	help
+	  Say Y or M here to include IDT (Sigmatel) HD-audio codec support in
+	  snd-hda-intel driver, such as STAC9200.
+
+comment "Set to Y if you want auto-loading the codec driver"
+	depends on SND_HDA=y && SND_HDA_CODEC_SIGMATEL=m
+
+config SND_HDA_CODEC_VIA
+	tristate "Build VIA HD-audio codec support"
+	select SND_HDA_GENERIC
+	help
+	  Say Y or M here to include VIA HD-audio codec support in
+	  snd-hda-intel driver, such as VT1708.
+
+comment "Set to Y if you want auto-loading the codec driver"
+	depends on SND_HDA=y && SND_HDA_CODEC_VIA=m
+
+config SND_HDA_CODEC_HDMI
+	tristate "Build HDMI/DisplayPort HD-audio codec support"
+	select SND_DYNAMIC_MINORS
+	help
+	  Say Y or M here to include HDMI and DisplayPort HD-audio codec
+	  support in snd-hda-intel driver.  This includes all AMD/ATI,
+	  Intel and Nvidia HDMI/DisplayPort codecs.
+
+	  Note that this option mandatorily enables CONFIG_SND_DYNAMIC_MINORS
+	  to assure the multiple streams for DP-MST support.
+
+comment "Set to Y if you want auto-loading the codec driver"
+	depends on SND_HDA=y && SND_HDA_CODEC_HDMI=m
+
+config SND_HDA_CODEC_CIRRUS
+	tristate "Build Cirrus Logic codec support"
+	select SND_HDA_GENERIC
+	help
+	  Say Y or M here to include Cirrus Logic codec support in
+	  snd-hda-intel driver, such as CS4206.
+
+comment "Set to Y if you want auto-loading the codec driver"
+	depends on SND_HDA=y && SND_HDA_CODEC_CIRRUS=m
+
+config SND_HDA_CODEC_CS8409
+	tristate "Build Cirrus Logic HDA bridge support"
+	select SND_HDA_GENERIC
+	help
+	  Say Y or M here to include Cirrus Logic HDA bridge support in
+	  snd-hda-intel driver, such as CS8409.
+
+comment "Set to Y if you want auto-loading the codec driver"
+	depends on SND_HDA=y && SND_HDA_CODEC_CS8409=m
+
+config SND_HDA_CODEC_CONEXANT
+	tristate "Build Conexant HD-audio codec support"
+	select SND_HDA_GENERIC
+	select SND_HDA_GENERIC_LEDS
+	help
+	  Say Y or M here to include Conexant HD-audio codec support in
+	  snd-hda-intel driver, such as CX20549.
+
+comment "Set to Y if you want auto-loading the codec driver"
+	depends on SND_HDA=y && SND_HDA_CODEC_CONEXANT=m
+
+config SND_HDA_CODEC_CA0110
+	tristate "Build Creative CA0110-IBG codec support"
+	select SND_HDA_GENERIC
+	help
+	  Say Y or M here to include Creative CA0110-IBG codec support in
+	  snd-hda-intel driver, found on some Creative X-Fi cards.
+
+comment "Set to Y if you want auto-loading the codec driver"
+	depends on SND_HDA=y && SND_HDA_CODEC_CA0110=m
+
+config SND_HDA_CODEC_CA0132
+	tristate "Build Creative CA0132 codec support"
+	help
+	  Say Y or M here to include Creative CA0132 codec support in
+	  snd-hda-intel driver.
+
+comment "Set to Y if you want auto-loading the codec driver"
+	depends on SND_HDA=y && SND_HDA_CODEC_CA0132=m
+
+config SND_HDA_CODEC_CA0132_DSP
+	bool "Support new DSP code for CA0132 codec"
+	depends on SND_HDA_CODEC_CA0132
+	default y
+	select SND_HDA_DSP_LOADER
+	select FW_LOADER
+	help
+	  Say Y here to enable the DSP for Creative CA0132 for extended
+	  features like equalizer or echo cancellation.
+
+	  Note that this option requires the external firmware file
+	  (ctefx.bin).
+
+config SND_HDA_CODEC_CMEDIA
+	tristate "Build C-Media HD-audio codec support"
+	select SND_HDA_GENERIC
+	help
+	  Say Y or M here to include C-Media HD-audio codec support in
+	  snd-hda-intel driver, such as CMI9880.
+
+comment "Set to Y if you want auto-loading the codec driver"
+	depends on SND_HDA=y && SND_HDA_CODEC_CMEDIA=m
+
+config SND_HDA_CODEC_SI3054
+	tristate "Build Silicon Labs 3054 HD-modem codec support"
+	help
+	  Say Y or M here to include Silicon Labs 3054 HD-modem codec
+	  (and compatibles) support in snd-hda-intel driver.
+
+comment "Set to Y if you want auto-loading the codec driver"
+	depends on SND_HDA=y && SND_HDA_CODEC_SI3054=m
+
+config SND_HDA_GENERIC
+	tristate "Enable generic HD-audio codec parser"
+	select SND_CTL_LED if SND_HDA_GENERIC_LEDS
+	select LEDS_CLASS if SND_HDA_GENERIC_LEDS
+	help
+	  Say Y or M here to enable the generic HD-audio codec parser
+	  in snd-hda-intel driver.
+
+comment "Set to Y if you want auto-loading the codec driver"
+	depends on SND_HDA=y && SND_HDA_GENERIC=m
+
+config SND_HDA_POWER_SAVE_DEFAULT
+	int "Default time-out for HD-audio power-save mode"
+	depends on PM
+	default 0
+	help
+	  The default time-out value in seconds for HD-audio automatic
+	  power-save mode.  0 means to disable the power-save mode.
+
+config SND_HDA_INTEL_HDMI_SILENT_STREAM
+	bool "Enable Silent Stream always for HDMI"
+	depends on SND_HDA_INTEL
+	help
+	  Say Y to enable HD-Audio Keep Alive (KAE) aka Silent Stream
+	  for HDMI on hardware that supports the feature.
+
+	  When enabled, the HDMI/DisplayPort codec will continue to provide
+	  a continuous clock and a valid but silent data stream to
+	  any connected external receiver. This allows to avoid gaps
+	  at start of playback. Many receivers require multiple seconds
+	  to start playing audio after the clock has been stopped.
+	  This feature can impact power consumption as resources
+	  are kept reserved both at transmitter and receiver.
+
+endif
+
+endmenu