Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 223 insertions, 0 deletions

diff --git a/sound/soc/amd/acp.h b/sound/soc/amd/acp.h
new file mode 100644
index 000000000..b29bef90f
--- /dev/null
+++ b/sound/soc/amd/acp.h
@@ -0,0 +1,223 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ACP_HW_H
+#define __ACP_HW_H
+
+#include "include/acp_2_2_d.h"
+#include "include/acp_2_2_sh_mask.h"
+
+#define ACP_PAGE_SIZE_4K_ENABLE			0x02
+
+#define ACP_PLAYBACK_PTE_OFFSET			10
+#define ACP_CAPTURE_PTE_OFFSET			0
+
+/* Playback and Capture Offset for Stoney */
+#define ACP_ST_PLAYBACK_PTE_OFFSET	0x04
+#define ACP_ST_CAPTURE_PTE_OFFSET	0x00
+#define ACP_ST_BT_PLAYBACK_PTE_OFFSET	0x08
+#define ACP_ST_BT_CAPTURE_PTE_OFFSET	0x0c
+
+#define ACP_GARLIC_CNTL_DEFAULT			0x00000FB4
+#define ACP_ONION_CNTL_DEFAULT			0x00000FB4
+
+#define ACP_PHYSICAL_BASE			0x14000
+
+/*
+ * In case of I2S SP controller instance, Stoney uses SRAM bank 1 for
+ * playback and SRAM Bank 2 for capture where as in case of BT I2S
+ * Instance, Stoney uses SRAM Bank 3 for playback & SRAM Bank 4 will
+ * be used for capture. Carrizo uses I2S SP controller instance. SRAM Banks
+ * 1, 2, 3, 4 will be used for playback & SRAM Banks 5, 6, 7, 8 will be used
+ * for capture scenario.
+ */
+#define ACP_SRAM_BANK_1_ADDRESS		0x4002000
+#define ACP_SRAM_BANK_2_ADDRESS		0x4004000
+#define ACP_SRAM_BANK_3_ADDRESS		0x4006000
+#define ACP_SRAM_BANK_4_ADDRESS		0x4008000
+#define ACP_SRAM_BANK_5_ADDRESS		0x400A000
+
+#define ACP_DMA_RESET_TIME			10000
+#define ACP_CLOCK_EN_TIME_OUT_VALUE		0x000000FF
+#define ACP_SOFT_RESET_DONE_TIME_OUT_VALUE	0x000000FF
+#define ACP_DMA_COMPLETE_TIME_OUT_VALUE		0x000000FF
+
+#define ACP_SRAM_BASE_ADDRESS			0x4000000
+#define ACP_DAGB_GRP_SRAM_BASE_ADDRESS		0x4001000
+#define ACP_DAGB_GRP_SRBM_SRAM_BASE_OFFSET	0x1000
+#define ACP_INTERNAL_APERTURE_WINDOW_0_ADDRESS	0x00000000
+#define ACP_INTERNAL_APERTURE_WINDOW_4_ADDRESS	0x01800000
+
+#define TO_ACP_I2S_1   0x2
+#define TO_ACP_I2S_2   0x4
+#define TO_BLUETOOTH   0x3
+#define FROM_ACP_I2S_1 0xa
+#define FROM_ACP_I2S_2 0xb
+#define FROM_BLUETOOTH 0xb
+
+#define I2S_SP_INSTANCE                 0x01
+#define I2S_BT_INSTANCE                 0x02
+#define I2S_MICSP_INSTANCE		0x03
+#define CAP_CHANNEL0			0x00
+#define CAP_CHANNEL1			0x01
+
+#define ACP_TILE_ON_MASK                0x03
+#define ACP_TILE_OFF_MASK               0x02
+#define ACP_TILE_ON_RETAIN_REG_MASK     0x1f
+#define ACP_TILE_OFF_RETAIN_REG_MASK    0x20
+
+#define ACP_TILE_P1_MASK                0x3e
+#define ACP_TILE_P2_MASK                0x3d
+#define ACP_TILE_DSP0_MASK              0x3b
+#define ACP_TILE_DSP1_MASK              0x37
+
+#define ACP_TILE_DSP2_MASK              0x2f
+/* Playback DMA channels */
+#define SYSRAM_TO_ACP_CH_NUM 12
+#define ACP_TO_I2S_DMA_CH_NUM 13
+
+/* Capture DMA channels */
+#define I2S_TO_ACP_DMA_CH_NUM 14
+#define ACP_TO_SYSRAM_CH_NUM 15
+
+/* Playback DMA Channels for I2S BT instance */
+#define SYSRAM_TO_ACP_BT_INSTANCE_CH_NUM  8
+#define ACP_TO_I2S_DMA_BT_INSTANCE_CH_NUM 9
+
+/* Capture DMA Channels for I2S BT Instance */
+#define I2S_TO_ACP_DMA_BT_INSTANCE_CH_NUM 10
+#define ACP_TO_SYSRAM_BT_INSTANCE_CH_NUM 11
+
+/* Playback DMA channels for I2S MICSP instance */
+#define SYSRAM_TO_ACP_MICSP_INSTANCE_CH_NUM  4
+#define ACP_TO_I2S_DMA_MICSP_INSTANCE_CH_NUM 5
+
+#define NUM_DSCRS_PER_CHANNEL 2
+
+#define PLAYBACK_START_DMA_DESCR_CH12 0
+#define PLAYBACK_END_DMA_DESCR_CH12 1
+#define PLAYBACK_START_DMA_DESCR_CH13 2
+#define PLAYBACK_END_DMA_DESCR_CH13 3
+
+#define CAPTURE_START_DMA_DESCR_CH14 4
+#define CAPTURE_END_DMA_DESCR_CH14 5
+#define CAPTURE_START_DMA_DESCR_CH15 6
+#define CAPTURE_END_DMA_DESCR_CH15 7
+
+/* I2S BT Instance DMA Descriptors */
+#define PLAYBACK_START_DMA_DESCR_CH8 8
+#define PLAYBACK_END_DMA_DESCR_CH8 9
+#define PLAYBACK_START_DMA_DESCR_CH9 10
+#define PLAYBACK_END_DMA_DESCR_CH9 11
+
+#define CAPTURE_START_DMA_DESCR_CH10 12
+#define CAPTURE_END_DMA_DESCR_CH10 13
+#define CAPTURE_START_DMA_DESCR_CH11 14
+#define CAPTURE_END_DMA_DESCR_CH11 15
+
+/* I2S MICSP Instance DMA Descriptors */
+#define PLAYBACK_START_DMA_DESCR_CH4 0
+#define PLAYBACK_END_DMA_DESCR_CH4 1
+#define PLAYBACK_START_DMA_DESCR_CH5 2
+#define PLAYBACK_END_DMA_DESCR_CH5 3
+
+#define mmACP_I2S_16BIT_RESOLUTION_EN       0x5209
+#define ACP_I2S_MIC_16BIT_RESOLUTION_EN 0x01
+#define ACP_I2S_MICSP_16BIT_RESOLUTION_EN 0x01
+#define ACP_I2S_SP_16BIT_RESOLUTION_EN	0x02
+#define ACP_I2S_BT_16BIT_RESOLUTION_EN	0x04
+#define ACP_BT_UART_PAD_SELECT_MASK	0x1
+
+enum acp_dma_priority_level {
+	/* 0x0 Specifies the DMA channel is given normal priority */
+	ACP_DMA_PRIORITY_LEVEL_NORMAL = 0x0,
+	/* 0x1 Specifies the DMA channel is given high priority */
+	ACP_DMA_PRIORITY_LEVEL_HIGH = 0x1,
+	ACP_DMA_PRIORITY_LEVEL_FORCESIZE = 0xFF
+};
+
+struct audio_substream_data {
+	dma_addr_t dma_addr;
+	unsigned int order;
+	u16 num_of_pages;
+	u16 i2s_instance;
+	u16 capture_channel;
+	u16 direction;
+	u16 ch1;
+	u16 ch2;
+	u16 destination;
+	u16 dma_dscr_idx_1;
+	u16 dma_dscr_idx_2;
+	u32 pte_offset;
+	u32 sram_bank;
+	u32 byte_cnt_high_reg_offset;
+	u32 byte_cnt_low_reg_offset;
+	u32 dma_curr_dscr;
+	uint64_t size;
+	u64 bytescount;
+	void __iomem *acp_mmio;
+};
+
+struct audio_drv_data {
+	struct snd_pcm_substream *play_i2ssp_stream;
+	struct snd_pcm_substream *capture_i2ssp_stream;
+	struct snd_pcm_substream *play_i2sbt_stream;
+	struct snd_pcm_substream *capture_i2sbt_stream;
+	struct snd_pcm_substream *play_i2s_micsp_stream;
+	void __iomem *acp_mmio;
+	u32 asic_type;
+	snd_pcm_sframes_t delay;
+};
+
+/*
+ * this structure used for platform data transfer between machine driver
+ * and dma driver
+ */
+struct acp_platform_info {
+	u16 play_i2s_instance;
+	u16 cap_i2s_instance;
+	u16 capture_channel;
+};
+
+union acp_dma_count {
+	struct {
+	u32 low;
+	u32 high;
+	} bcount;
+	u64 bytescount;
+};
+
+enum {
+	ACP_TILE_P1 = 0,
+	ACP_TILE_P2,
+	ACP_TILE_DSP0,
+	ACP_TILE_DSP1,
+	ACP_TILE_DSP2,
+};
+
+enum {
+	ACP_DMA_ATTR_SHAREDMEM_TO_DAGB_ONION = 0x0,
+	ACP_DMA_ATTR_SHARED_MEM_TO_DAGB_GARLIC = 0x1,
+	ACP_DMA_ATTR_DAGB_ONION_TO_SHAREDMEM = 0x8,
+	ACP_DMA_ATTR_DAGB_GARLIC_TO_SHAREDMEM = 0x9,
+	ACP_DMA_ATTR_FORCE_SIZE = 0xF
+};
+
+typedef struct acp_dma_dscr_transfer {
+	/* Specifies the source memory location for the DMA data transfer. */
+	u32 src;
+	/*
+	 * Specifies the destination memory location to where the data will
+	 * be transferred.
+	 */
+	u32 dest;
+	/*
+	 * Specifies the number of bytes need to be transferred
+	 * from source to destination memory.Transfer direction & IOC enable
+	 */
+	u32 xfer_val;
+	/* Reserved for future use */
+	u32 reserved;
+} acp_dma_dscr_transfer_t;
+
+extern bool acp_bt_uart_enable;
+
+#endif /*__ACP_HW_H */