Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 373 insertions, 0 deletions

diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig
new file mode 100644
index 000000000..614eceda6
--- /dev/null
+++ b/sound/soc/fsl/Kconfig
@@ -0,0 +1,373 @@
+# SPDX-License-Identifier: GPL-2.0-only
+menu "SoC Audio for Freescale CPUs"
+
+comment "Common SoC Audio options for Freescale CPUs:"
+
+config SND_SOC_FSL_ASRC
+	tristate "Asynchronous Sample Rate Converter (ASRC) module support"
+	depends on HAS_DMA
+	select REGMAP_MMIO
+	select SND_SOC_GENERIC_DMAENGINE_PCM
+	help
+	  Say Y if you want to add Asynchronous Sample Rate Converter (ASRC)
+	  support for the Freescale CPUs.
+	  This option is only useful for out-of-tree drivers since
+	  in-tree drivers select it automatically.
+
+config SND_SOC_FSL_SAI
+	tristate "Synchronous Audio Interface (SAI) module support"
+	select REGMAP_MMIO
+	select SND_SOC_IMX_PCM_DMA if SND_IMX_SOC != n
+	select SND_SOC_GENERIC_DMAENGINE_PCM
+	select SND_SOC_FSL_UTILS
+	help
+	  Say Y if you want to add Synchronous Audio Interface (SAI)
+	  support for the Freescale CPUs.
+	  This option is only useful for out-of-tree drivers since
+	  in-tree drivers select it automatically.
+
+config SND_SOC_FSL_MQS
+	tristate "Medium Quality Sound (MQS) module support"
+	depends on SND_SOC_FSL_SAI
+	select REGMAP_MMIO
+	help
+	  Say Y if you want to add Medium Quality Sound (MQS)
+	  support for the Freescale CPUs.
+	  This option is only useful for out-of-tree drivers since
+	  in-tree drivers select it automatically.
+
+config SND_SOC_FSL_AUDMIX
+	tristate "Audio Mixer (AUDMIX) module support"
+	select REGMAP_MMIO
+	help
+	  Say Y if you want to add Audio Mixer (AUDMIX)
+	  support for the NXP iMX CPUs.
+
+config SND_SOC_FSL_SSI
+	tristate "Synchronous Serial Interface module (SSI) support"
+	select SND_SOC_IMX_PCM_DMA if SND_IMX_SOC != n
+	select SND_SOC_IMX_PCM_FIQ if SND_IMX_SOC != n && (MXC_TZIC || MXC_AVIC)
+	select REGMAP_MMIO
+	help
+	  Say Y if you want to add Synchronous Serial Interface (SSI)
+	  support for the Freescale CPUs.
+	  This option is only useful for out-of-tree drivers since
+	  in-tree drivers select it automatically.
+
+config SND_SOC_FSL_SPDIF
+	tristate "Sony/Philips Digital Interface (S/PDIF) module support"
+	select REGMAP_MMIO
+	select SND_SOC_IMX_PCM_DMA if SND_IMX_SOC != n
+	select SND_SOC_IMX_PCM_FIQ if SND_IMX_SOC != n && (MXC_TZIC || MXC_AVIC)
+	select BITREVERSE
+	select SND_SOC_FSL_UTILS
+	help
+	  Say Y if you want to add Sony/Philips Digital Interface (SPDIF)
+	  support for the Freescale CPUs.
+	  This option is only useful for out-of-tree drivers since
+	  in-tree drivers select it automatically.
+
+config SND_SOC_FSL_ESAI
+	tristate "Enhanced Serial Audio Interface (ESAI) module support"
+	select REGMAP_MMIO
+	select SND_SOC_IMX_PCM_DMA if SND_IMX_SOC != n
+	help
+	  Say Y if you want to add Enhanced Synchronous Audio Interface
+	  (ESAI) support for the Freescale CPUs.
+	  This option is only useful for out-of-tree drivers since
+	  in-tree drivers select it automatically.
+
+config SND_SOC_FSL_MICFIL
+	tristate "Pulse Density Modulation Microphone Interface (MICFIL) module support"
+	select REGMAP_MMIO
+	select SND_SOC_IMX_PCM_DMA if SND_IMX_SOC != n
+	select SND_SOC_GENERIC_DMAENGINE_PCM
+	select SND_SOC_FSL_UTILS
+	help
+	  Say Y if you want to add Pulse Density Modulation microphone
+	  interface (MICFIL) support for NXP.
+
+config SND_SOC_FSL_EASRC
+	tristate "Enhanced Asynchronous Sample Rate Converter (EASRC) module support"
+	depends on SND_SOC_FSL_ASRC
+	select REGMAP_MMIO
+	select SND_SOC_GENERIC_DMAENGINE_PCM
+	help
+	  Say Y if you want to add Enhanced ASRC support for NXP. The ASRC is
+	  a digital module that converts audio from a source sample rate to a
+	  destination sample rate. It is a new design module compare with the
+	  old ASRC.
+
+config SND_SOC_FSL_XCVR
+	tristate "NXP Audio Transceiver (XCVR) module support"
+	select REGMAP_MMIO
+	select SND_SOC_IMX_PCM_DMA if SND_IMX_SOC != n
+	select SND_SOC_GENERIC_DMAENGINE_PCM
+	help
+	  Say Y if you want to add Audio Transceiver (XCVR) support for NXP
+	  iMX CPUs. XCVR is a digital module that supports HDMI2.1 eARC,
+	  HDMI1.4 ARC and SPDIF.
+
+config SND_SOC_FSL_AUD2HTX
+	tristate "AUDIO TO HDMI TX module support"
+	depends on ARCH_MXC || COMPILE_TEST
+	select SND_SOC_IMX_PCM_DMA if SND_IMX_SOC != n
+	help
+	  Say Y if you want to add AUDIO TO HDMI TX support for NXP.
+
+config SND_SOC_FSL_UTILS
+	tristate
+
+config SND_SOC_FSL_RPMSG
+	tristate "NXP Audio Base On RPMSG support"
+	depends on COMMON_CLK
+	depends on RPMSG
+	depends on SND_IMX_SOC || SND_IMX_SOC = n
+	select SND_SOC_IMX_RPMSG if SND_IMX_SOC != n
+	help
+	  Say Y if you want to add rpmsg audio support for the Freescale CPUs.
+	  This option is only useful for out-of-tree drivers since
+	  in-tree drivers select it automatically.
+
+config SND_SOC_IMX_PCM_DMA
+	tristate
+	select SND_SOC_GENERIC_DMAENGINE_PCM
+
+config SND_SOC_IMX_AUDIO_RPMSG
+	tristate
+	depends on RPMSG
+
+config SND_SOC_IMX_PCM_RPMSG
+	tristate
+	depends on SND_SOC_IMX_AUDIO_RPMSG
+	select SND_SOC_GENERIC_DMAENGINE_PCM
+
+config SND_SOC_IMX_AUDMUX
+	tristate "Digital Audio Mux module support"
+	help
+	  Say Y if you want to add Digital Audio Mux (AUDMUX) support
+	  for the ARM i.MX CPUs.
+	  This option is only useful for out-of-tree drivers since
+	  in-tree drivers select it automatically.
+
+config SND_POWERPC_SOC
+	tristate "SoC Audio for Freescale PowerPC CPUs"
+	depends on FSL_SOC || PPC_MPC52xx
+	help
+	  Say Y or M if you want to add support for codecs attached to
+	  the PowerPC CPUs.
+
+config SND_IMX_SOC
+	tristate "SoC Audio for Freescale i.MX CPUs"
+	depends on ARCH_MXC || COMPILE_TEST
+	help
+	  Say Y or M if you want to add support for codecs attached to
+	  the i.MX CPUs.
+
+if SND_POWERPC_SOC
+
+config SND_MPC52xx_DMA
+	tristate
+
+config SND_SOC_POWERPC_DMA
+	tristate
+
+comment "SoC Audio support for Freescale PPC boards:"
+
+config SND_SOC_MPC8610_HPCD
+	tristate "ALSA SoC support for the Freescale MPC8610 HPCD board"
+	# I2C is necessary for the CS4270 driver
+	depends on MPC8610_HPCD && I2C
+	select SND_SOC_FSL_SSI
+	select SND_SOC_FSL_UTILS
+	select SND_SOC_POWERPC_DMA
+	select SND_SOC_CS4270
+	select SND_SOC_CS4270_VD33_ERRATA
+	default y if MPC8610_HPCD
+	help
+	  Say Y if you want to enable audio on the Freescale MPC8610 HPCD.
+
+config SND_SOC_P1022_DS
+	tristate "ALSA SoC support for the Freescale P1022 DS board"
+	# I2C is necessary for the WM8776 driver
+	depends on P1022_DS && I2C
+	select SND_SOC_FSL_SSI
+	select SND_SOC_FSL_UTILS
+	select SND_SOC_POWERPC_DMA
+	select SND_SOC_WM8776
+	default y if P1022_DS
+	help
+	  Say Y if you want to enable audio on the Freescale P1022 DS board.
+	  This will also include the Wolfson Microelectronics WM8776 codec
+	  driver.
+
+config SND_SOC_P1022_RDK
+	tristate "ALSA SoC support for the Freescale / iVeia P1022 RDK board"
+	# I2C is necessary for the WM8960 driver
+	depends on P1022_RDK && I2C
+	select SND_SOC_FSL_SSI
+	select SND_SOC_FSL_UTILS
+	select SND_SOC_POWERPC_DMA
+	select SND_SOC_WM8960
+	default y if P1022_RDK
+	help
+	  Say Y if you want to enable audio on the Freescale / iVeia
+	  P1022 RDK board.  This will also include the Wolfson
+	  Microelectronics WM8960 codec driver.
+
+config SND_SOC_MPC5200_I2S
+	tristate "Freescale MPC5200 PSC in I2S mode driver"
+	depends on PPC_MPC52xx && PPC_BESTCOMM
+	select SND_MPC52xx_DMA
+	select PPC_BESTCOMM_GEN_BD
+	help
+	  Say Y here to support the MPC5200 PSCs in I2S mode.
+
+config SND_SOC_MPC5200_AC97
+	tristate "Freescale MPC5200 PSC in AC97 mode driver"
+	depends on PPC_MPC52xx && PPC_BESTCOMM
+	select SND_SOC_AC97_BUS
+	select SND_MPC52xx_DMA
+	select PPC_BESTCOMM_GEN_BD
+	help
+	  Say Y here to support the MPC5200 PSCs in AC97 mode.
+
+config SND_MPC52xx_SOC_PCM030
+	tristate "SoC AC97 Audio support for Phytec pcm030 and WM9712"
+	depends on PPC_MPC5200_SIMPLE
+	select SND_SOC_MPC5200_AC97
+	select SND_SOC_WM9712
+	help
+	  Say Y if you want to add support for sound on the Phytec pcm030
+	  baseboard.
+
+config SND_MPC52xx_SOC_EFIKA
+	tristate "SoC AC97 Audio support for bbplan Efika and STAC9766"
+	depends on PPC_EFIKA
+	select SND_SOC_MPC5200_AC97
+	select SND_SOC_STAC9766
+	help
+	  Say Y if you want to add support for sound on the Efika.
+
+endif # SND_POWERPC_SOC
+
+config SND_SOC_IMX_PCM_FIQ
+	tristate
+	default y if (SND_SOC_FSL_SSI=m || SND_SOC_FSL_SPDIF=m) && (MXC_TZIC || MXC_AVIC)
+	select FIQ
+
+if SND_IMX_SOC
+
+comment "SoC Audio support for Freescale i.MX boards:"
+
+config SND_SOC_EUKREA_TLV320
+	tristate "Eukrea TLV320"
+	depends on ARCH_MXC && !ARM64 && I2C
+	select SND_SOC_TLV320AIC23_I2C
+	select SND_SOC_IMX_AUDMUX
+	select SND_SOC_FSL_SSI
+	select SND_SOC_IMX_PCM_DMA
+	help
+	  Enable I2S based access to the TLV320AIC23B codec attached
+	  to the SSI interface
+
+config SND_SOC_IMX_ES8328
+	tristate "SoC Audio support for i.MX boards with the ES8328 codec"
+	depends on OF && (I2C || SPI)
+	select SND_SOC_ES8328_I2C if I2C
+	select SND_SOC_ES8328_SPI if SPI_MASTER
+	select SND_SOC_IMX_PCM_DMA
+	select SND_SOC_IMX_AUDMUX
+	select SND_SOC_FSL_SSI
+	help
+	  Say Y if you want to add support for the ES8328 audio codec connected
+	  via SSI/I2S over either SPI or I2C.
+
+config SND_SOC_IMX_SGTL5000
+	tristate "SoC Audio support for i.MX boards with sgtl5000"
+	depends on OF && I2C
+	select SND_SOC_SGTL5000
+	select SND_SOC_IMX_PCM_DMA
+	select SND_SOC_IMX_AUDMUX
+	select SND_SOC_FSL_SSI
+	help
+	  Say Y if you want to add support for SoC audio on an i.MX board with
+	  a sgtl5000 codec.
+
+config SND_SOC_IMX_SPDIF
+	tristate "SoC Audio support for i.MX boards with S/PDIF"
+	select SND_SOC_IMX_PCM_DMA
+	select SND_SOC_FSL_SPDIF
+	help
+	  SoC Audio support for i.MX boards with S/PDIF
+	  Say Y if you want to add support for SoC audio on an i.MX board with
+	  a S/DPDIF.
+
+config SND_SOC_FSL_ASOC_CARD
+	tristate "Generic ASoC Sound Card with ASRC support"
+	depends on OF && I2C
+	# enforce SND_SOC_FSL_ASOC_CARD=m if SND_AC97_CODEC=m:
+	depends on SND_AC97_CODEC || SND_AC97_CODEC=n
+	select SND_SIMPLE_CARD_UTILS
+	select SND_SOC_IMX_AUDMUX
+	select SND_SOC_IMX_PCM_DMA
+	select SND_SOC_FSL_ESAI
+	select SND_SOC_FSL_SAI
+	select SND_SOC_FSL_SSI
+	select SND_SOC_TLV320AIC31XX
+	select SND_SOC_WM8994
+	select MFD_WM8994
+	help
+	 ALSA SoC Audio support with ASRC feature for Freescale SoCs that have
+	 ESAI/SAI/SSI and connect with external CODECs such as WM8962, CS42888,
+	 CS4271, CS4272, SGTL5000 and TLV320AIC32x4.
+	 Say Y if you want to add support for Freescale Generic ASoC Sound Card.
+
+config SND_SOC_IMX_AUDMIX
+	tristate "SoC Audio support for i.MX boards with AUDMIX"
+	select SND_SOC_FSL_AUDMIX
+	select SND_SOC_FSL_SAI
+	help
+	  SoC Audio support for i.MX boards with Audio Mixer
+	  Say Y if you want to add support for SoC audio on an i.MX board with
+	  an Audio Mixer.
+
+config SND_SOC_IMX_HDMI
+	tristate "SoC Audio support for i.MX boards with HDMI port"
+	select SND_SOC_FSL_SAI
+	select SND_SOC_FSL_AUD2HTX
+	select SND_SOC_HDMI_CODEC
+	help
+	  ALSA SoC Audio support with HDMI feature for Freescale SoCs that have
+	  SAI/AUD2HTX and connect with internal HDMI IP or external module
+	  SII902X.
+	  Say Y if you want to add support for SoC audio on an i.MX board with
+	  IMX HDMI.
+
+config SND_SOC_IMX_RPMSG
+	tristate "SoC Audio support for i.MX boards with rpmsg"
+	depends on RPMSG
+	select SND_SOC_IMX_PCM_RPMSG
+	select SND_SOC_IMX_AUDIO_RPMSG
+	help
+	  SoC Audio support for i.MX boards with rpmsg.
+	  There should be rpmsg devices defined in other core (M core)
+	  Say Y if you want to add support for SoC audio on an i.MX board with
+	  a rpmsg devices.
+
+config SND_SOC_IMX_CARD
+	tristate "SoC Audio Graph Sound Card support for i.MX boards"
+	depends on OF && I2C
+	select SND_SOC_AK4458
+	select SND_SOC_AK5558
+	select SND_SOC_IMX_PCM_DMA
+	select SND_SOC_FSL_SAI
+	select SND_SIMPLE_CARD_UTILS
+	help
+	  This option enables audio sound card support for i.MX boards
+	  with OF-graph DT bindings.
+	  It also support DPCM of single CPU multi Codec ststem.
+
+endif # SND_IMX_SOC
+
+endmenu