Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 303 insertions, 0 deletions

diff --git a/tools/perf/util/string.c b/tools/perf/util/string.c
new file mode 100644
index 000000000..4f12a96f3
--- /dev/null
+++ b/tools/perf/util/string.c
@@ -0,0 +1,303 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "string2.h"
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <stdlib.h>
+
+#include <linux/ctype.h>
+
+const char *graph_dotted_line =
+	"---------------------------------------------------------------------"
+	"---------------------------------------------------------------------"
+	"---------------------------------------------------------------------";
+const char *dots =
+	"....................................................................."
+	"....................................................................."
+	".....................................................................";
+
+/*
+ * perf_atoll()
+ * Parse (\d+)(b|B|kb|KB|mb|MB|gb|GB|tb|TB) (e.g. "256MB")
+ * and return its numeric value
+ */
+s64 perf_atoll(const char *str)
+{
+	s64 length;
+	char *p;
+	char c;
+
+	if (!isdigit(str[0]))
+		goto out_err;
+
+	length = strtoll(str, &p, 10);
+	switch (c = *p++) {
+		case 'b': case 'B':
+			if (*p)
+				goto out_err;
+
+			__fallthrough;
+		case '\0':
+			return length;
+		default:
+			goto out_err;
+		/* two-letter suffices */
+		case 'k': case 'K':
+			length <<= 10;
+			break;
+		case 'm': case 'M':
+			length <<= 20;
+			break;
+		case 'g': case 'G':
+			length <<= 30;
+			break;
+		case 't': case 'T':
+			length <<= 40;
+			break;
+	}
+	/* we want the cases to match */
+	if (islower(c)) {
+		if (strcmp(p, "b") != 0)
+			goto out_err;
+	} else {
+		if (strcmp(p, "B") != 0)
+			goto out_err;
+	}
+	return length;
+
+out_err:
+	return -1;
+}
+
+/* Character class matching */
+static bool __match_charclass(const char *pat, char c, const char **npat)
+{
+	bool complement = false, ret = true;
+
+	if (*pat == '!') {
+		complement = true;
+		pat++;
+	}
+	if (*pat++ == c)	/* First character is special */
+		goto end;
+
+	while (*pat && *pat != ']') {	/* Matching */
+		if (*pat == '-' && *(pat + 1) != ']') {	/* Range */
+			if (*(pat - 1) <= c && c <= *(pat + 1))
+				goto end;
+			if (*(pat - 1) > *(pat + 1))
+				goto error;
+			pat += 2;
+		} else if (*pat++ == c)
+			goto end;
+	}
+	if (!*pat)
+		goto error;
+	ret = false;
+
+end:
+	while (*pat && *pat != ']')	/* Searching closing */
+		pat++;
+	if (!*pat)
+		goto error;
+	*npat = pat + 1;
+	return complement ? !ret : ret;
+
+error:
+	return false;
+}
+
+/* Glob/lazy pattern matching */
+static bool __match_glob(const char *str, const char *pat, bool ignore_space,
+			bool case_ins)
+{
+	while (*str && *pat && *pat != '*') {
+		if (ignore_space) {
+			/* Ignore spaces for lazy matching */
+			if (isspace(*str)) {
+				str++;
+				continue;
+			}
+			if (isspace(*pat)) {
+				pat++;
+				continue;
+			}
+		}
+		if (*pat == '?') {	/* Matches any single character */
+			str++;
+			pat++;
+			continue;
+		} else if (*pat == '[')	/* Character classes/Ranges */
+			if (__match_charclass(pat + 1, *str, &pat)) {
+				str++;
+				continue;
+			} else
+				return false;
+		else if (*pat == '\\') /* Escaped char match as normal char */
+			pat++;
+		if (case_ins) {
+			if (tolower(*str) != tolower(*pat))
+				return false;
+		} else if (*str != *pat)
+			return false;
+		str++;
+		pat++;
+	}
+	/* Check wild card */
+	if (*pat == '*') {
+		while (*pat == '*')
+			pat++;
+		if (!*pat)	/* Tail wild card matches all */
+			return true;
+		while (*str)
+			if (__match_glob(str++, pat, ignore_space, case_ins))
+				return true;
+	}
+	return !*str && !*pat;
+}
+
+/**
+ * strglobmatch - glob expression pattern matching
+ * @str: the target string to match
+ * @pat: the pattern string to match
+ *
+ * This returns true if the @str matches @pat. @pat can includes wildcards
+ * ('*','?') and character classes ([CHARS], complementation and ranges are
+ * also supported). Also, this supports escape character ('\') to use special
+ * characters as normal character.
+ *
+ * Note: if @pat syntax is broken, this always returns false.
+ */
+bool strglobmatch(const char *str, const char *pat)
+{
+	return __match_glob(str, pat, false, false);
+}
+
+bool strglobmatch_nocase(const char *str, const char *pat)
+{
+	return __match_glob(str, pat, false, true);
+}
+
+/**
+ * strlazymatch - matching pattern strings lazily with glob pattern
+ * @str: the target string to match
+ * @pat: the pattern string to match
+ *
+ * This is similar to strglobmatch, except this ignores spaces in
+ * the target string.
+ */
+bool strlazymatch(const char *str, const char *pat)
+{
+	return __match_glob(str, pat, true, false);
+}
+
+/**
+ * strtailcmp - Compare the tail of two strings
+ * @s1: 1st string to be compared
+ * @s2: 2nd string to be compared
+ *
+ * Return 0 if whole of either string is same as another's tail part.
+ */
+int strtailcmp(const char *s1, const char *s2)
+{
+	int i1 = strlen(s1);
+	int i2 = strlen(s2);
+	while (--i1 >= 0 && --i2 >= 0) {
+		if (s1[i1] != s2[i2])
+			return s1[i1] - s2[i2];
+	}
+	return 0;
+}
+
+char *asprintf_expr_inout_ints(const char *var, bool in, size_t nints, int *ints)
+{
+	/*
+	 * FIXME: replace this with an expression using log10() when we
+	 * find a suitable implementation, maybe the one in the dvb drivers...
+	 *
+	 * "%s == %d || " = log10(MAXINT) * 2 + 8 chars for the operators
+	 */
+	size_t size = nints * 28 + 1; /* \0 */
+	size_t i, printed = 0;
+	char *expr = malloc(size);
+
+	if (expr) {
+		const char *or_and = "||", *eq_neq = "==";
+		char *e = expr;
+
+		if (!in) {
+			or_and = "&&";
+			eq_neq = "!=";
+		}
+
+		for (i = 0; i < nints; ++i) {
+			if (printed == size)
+				goto out_err_overflow;
+
+			if (i > 0)
+				printed += scnprintf(e + printed, size - printed, " %s ", or_and);
+			printed += scnprintf(e + printed, size - printed,
+					     "%s %s %d", var, eq_neq, ints[i]);
+		}
+	}
+
+	return expr;
+
+out_err_overflow:
+	free(expr);
+	return NULL;
+}
+
+/* Like strpbrk(), but not break if it is right after a backslash (escaped) */
+char *strpbrk_esc(char *str, const char *stopset)
+{
+	char *ptr;
+
+	do {
+		ptr = strpbrk(str, stopset);
+		if (ptr == str ||
+		    (ptr == str + 1 && *(ptr - 1) != '\\'))
+			break;
+		str = ptr + 1;
+	} while (ptr && *(ptr - 1) == '\\' && *(ptr - 2) != '\\');
+
+	return ptr;
+}
+
+/* Like strdup, but do not copy a single backslash */
+char *strdup_esc(const char *str)
+{
+	char *s, *d, *p, *ret = strdup(str);
+
+	if (!ret)
+		return NULL;
+
+	d = strchr(ret, '\\');
+	if (!d)
+		return ret;
+
+	s = d + 1;
+	do {
+		if (*s == '\0') {
+			*d = '\0';
+			break;
+		}
+		p = strchr(s + 1, '\\');
+		if (p) {
+			memmove(d, s, p - s);
+			d += p - s;
+			s = p + 1;
+		} else
+			memmove(d, s, strlen(s) + 1);
+	} while (p);
+
+	return ret;
+}
+
+unsigned int hex(char c)
+{
+	if (c >= '0' && c <= '9')
+		return c - '0';
+	if (c >= 'a' && c <= 'f')
+		return c - 'a' + 10;
+	return c - 'A' + 10;
+}