Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 208 insertions, 0 deletions

diff --git a/tools/testing/selftests/bpf/test_xsk.sh b/tools/testing/selftests/bpf/test_xsk.sh
new file mode 100755
index 000000000..b077cf58f
--- /dev/null
+++ b/tools/testing/selftests/bpf/test_xsk.sh
@@ -0,0 +1,208 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright(c) 2020 Intel Corporation, Weqaar Janjua <weqaar.a.janjua@intel.com>
+
+# AF_XDP selftests based on veth
+#
+# End-to-end AF_XDP over Veth test
+#
+# Topology:
+# ---------
+#                 -----------
+#               _ | Process | _
+#              /  -----------  \
+#             /        |        \
+#            /         |         \
+#      -----------     |     -----------
+#      | Thread1 |     |     | Thread2 |
+#      -----------     |     -----------
+#           |          |          |
+#      -----------     |     -----------
+#      |  xskX   |     |     |  xskY   |
+#      -----------     |     -----------
+#           |          |          |
+#      -----------     |     ----------
+#      |  vethX  | --------- |  vethY |
+#      -----------   peer    ----------
+#
+# AF_XDP is an address family optimized for high performance packet processing,
+# it is XDP’s user-space interface.
+#
+# An AF_XDP socket is linked to a single UMEM which is a region of virtual
+# contiguous memory, divided into equal-sized frames.
+#
+# Refer to AF_XDP Kernel Documentation for detailed information:
+# https://www.kernel.org/doc/html/latest/networking/af_xdp.html
+#
+# Prerequisites setup by script:
+#
+#   Set up veth interfaces as per the topology shown ^^:
+#   * setup two veth interfaces
+#   ** veth<xxxx>
+#   ** veth<yyyy>
+#   *** xxxx and yyyy are randomly generated 4 digit numbers used to avoid
+#       conflict with any existing interface
+#   * tests the veth and xsk layers of the topology
+#
+# See the source xskxceiver.c for information on each test
+#
+# Kernel configuration:
+# ---------------------
+# See "config" file for recommended kernel config options.
+#
+# Turn on XDP sockets and veth support when compiling i.e.
+# 	Networking support -->
+# 		Networking options -->
+# 			[ * ] XDP sockets
+#
+# Executing Tests:
+# ----------------
+# Must run with CAP_NET_ADMIN capability.
+#
+# Run:
+#   sudo ./test_xsk.sh
+#
+# If running from kselftests:
+#   sudo make run_tests
+#
+# Run with verbose output:
+#   sudo ./test_xsk.sh -v
+#
+# Run and dump packet contents:
+#   sudo ./test_xsk.sh -D
+#
+# Set up veth interfaces and leave them up so xskxceiver can be launched in a debugger:
+#   sudo ./test_xsk.sh -d
+#
+# Run test suite for physical device in loopback mode
+#   sudo ./test_xsk.sh -i IFACE
+
+. xsk_prereqs.sh
+
+ETH=""
+
+while getopts "vDi:d" flag
+do
+	case "${flag}" in
+		v) verbose=1;;
+		D) dump_pkts=1;;
+		d) debug=1;;
+		i) ETH=${OPTARG};;
+	esac
+done
+
+TEST_NAME="PREREQUISITES"
+
+URANDOM=/dev/urandom
+[ ! -e "${URANDOM}" ] && { echo "${URANDOM} not found. Skipping tests."; test_exit $ksft_fail; }
+
+VETH0_POSTFIX=$(cat ${URANDOM} | tr -dc '0-9' | fold -w 256 | head -n 1 | head --bytes 4)
+VETH0=ve${VETH0_POSTFIX}
+VETH1_POSTFIX=$(cat ${URANDOM} | tr -dc '0-9' | fold -w 256 | head -n 1 | head --bytes 4)
+VETH1=ve${VETH1_POSTFIX}
+MTU=1500
+
+trap ctrl_c INT
+
+function ctrl_c() {
+        cleanup_exit ${VETH0} ${VETH1}
+	exit 1
+}
+
+setup_vethPairs() {
+	if [[ $verbose -eq 1 ]]; then
+	        echo "setting up ${VETH0}"
+	fi
+	ip link add ${VETH0} numtxqueues 4 numrxqueues 4 type veth peer name ${VETH1} numtxqueues 4 numrxqueues 4
+	if [ -f /proc/net/if_inet6 ]; then
+		echo 1 > /proc/sys/net/ipv6/conf/${VETH0}/disable_ipv6
+	fi
+	if [[ $verbose -eq 1 ]]; then
+	        echo "setting up ${VETH1}"
+	fi
+
+	if [[ $busy_poll -eq 1 ]]; then
+	        echo 2 > /sys/class/net/${VETH0}/napi_defer_hard_irqs
+		echo 200000 > /sys/class/net/${VETH0}/gro_flush_timeout
+		echo 2 > /sys/class/net/${VETH1}/napi_defer_hard_irqs
+		echo 200000 > /sys/class/net/${VETH1}/gro_flush_timeout
+	fi
+
+	ip link set ${VETH1} mtu ${MTU}
+	ip link set ${VETH0} mtu ${MTU}
+	ip link set ${VETH1} up
+	ip link set ${VETH0} up
+}
+
+if [ ! -z $ETH ]; then
+	VETH0=${ETH}
+	VETH1=${ETH}
+else
+	validate_root_exec
+	validate_veth_support ${VETH0}
+	validate_ip_utility
+	setup_vethPairs
+
+	retval=$?
+	if [ $retval -ne 0 ]; then
+		test_status $retval "${TEST_NAME}"
+		cleanup_exit ${VETH0} ${VETH1}
+		exit $retval
+	fi
+fi
+
+
+if [[ $verbose -eq 1 ]]; then
+	ARGS+="-v "
+fi
+
+if [[ $dump_pkts -eq 1 ]]; then
+	ARGS="-D "
+fi
+
+retval=$?
+test_status $retval "${TEST_NAME}"
+
+## START TESTS
+
+statusList=()
+
+TEST_NAME="XSK_SELFTESTS_${VETH0}_SOFTIRQ"
+
+if [[ $debug -eq 1 ]]; then
+    echo "-i" ${VETH0} "-i" ${VETH1}
+    exit
+fi
+
+exec_xskxceiver
+
+if [ -z $ETH ]; then
+	cleanup_exit ${VETH0} ${VETH1}
+fi
+TEST_NAME="XSK_SELFTESTS_${VETH0}_BUSY_POLL"
+busy_poll=1
+
+if [ -z $ETH ]; then
+	setup_vethPairs
+fi
+exec_xskxceiver
+
+## END TESTS
+
+if [ -z $ETH ]; then
+	cleanup_exit ${VETH0} ${VETH1}
+fi
+
+failures=0
+echo -e "\nSummary:"
+for i in "${!statusList[@]}"
+do
+	if [ ${statusList[$i]} -ne 0 ]; then
+	        test_status ${statusList[$i]} ${nameList[$i]}
+		failures=1
+	fi
+done
+
+if [ $failures -eq 0 ]; then
+        echo "All tests successful!"
+fi