Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 658 insertions, 0 deletions

diff --git a/tools/testing/selftests/drivers/net/mlxsw/tc_sample.sh b/tools/testing/selftests/drivers/net/mlxsw/tc_sample.sh
new file mode 100755
index 000000000..83a0210e7
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/mlxsw/tc_sample.sh
@@ -0,0 +1,658 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Test that packets are sampled when tc-sample is used and that reported
+# metadata is correct. Two sets of hosts (with and without LAG) are used, since
+# metadata extraction in mlxsw is a bit different when LAG is involved.
+#
+# +---------------------------------+       +---------------------------------+
+# | H1 (vrf)                        |       | H3 (vrf)                        |
+# |    + $h1                        |       |    + $h3_lag                    |
+# |    | 192.0.2.1/28               |       |    | 192.0.2.17/28              |
+# |    |                            |       |    |                            |
+# |    |  default via 192.0.2.2     |       |    |  default via 192.0.2.18    |
+# +----|----------------------------+       +----|----------------------------+
+#      |                                         |
+# +----|-----------------------------------------|----------------------------+
+# |    | 192.0.2.2/28                            | 192.0.2.18/28              |
+# |    + $rp1                                    + $rp3_lag                   |
+# |                                                                           |
+# |    + $rp2                                    + $rp4_lag                   |
+# |    | 198.51.100.2/28                         | 198.51.100.18/28           |
+# +----|-----------------------------------------|----------------------------+
+#      |                                         |
+# +----|----------------------------+       +----|----------------------------+
+# |    |  default via 198.51.100.2  |       |    |  default via 198.51.100.18 |
+# |    |                            |       |    |                            |
+# |    | 198.51.100.1/28            |       |    | 198.51.100.17/28           |
+# |    + $h2                        |       |    + $h4_lag                    |
+# | H2 (vrf)                        |       | H4 (vrf)                        |
+# +---------------------------------+       +---------------------------------+
+
+lib_dir=$(dirname $0)/../../../net/forwarding
+
+ALL_TESTS="
+	tc_sample_rate_test
+	tc_sample_max_rate_test
+	tc_sample_conflict_test
+	tc_sample_group_conflict_test
+	tc_sample_md_iif_test
+	tc_sample_md_lag_iif_test
+	tc_sample_md_oif_test
+	tc_sample_md_lag_oif_test
+	tc_sample_md_out_tc_test
+	tc_sample_md_out_tc_occ_test
+	tc_sample_md_latency_test
+	tc_sample_acl_group_conflict_test
+	tc_sample_acl_rate_test
+	tc_sample_acl_max_rate_test
+"
+NUM_NETIFS=8
+CAPTURE_FILE=$(mktemp)
+source $lib_dir/lib.sh
+source $lib_dir/devlink_lib.sh
+source mlxsw_lib.sh
+
+# Available at https://github.com/Mellanox/libpsample
+require_command psample
+
+h1_create()
+{
+	simple_if_init $h1 192.0.2.1/28
+
+	ip -4 route add default vrf v$h1 nexthop via 192.0.2.2
+}
+
+h1_destroy()
+{
+	ip -4 route del default vrf v$h1 nexthop via 192.0.2.2
+
+	simple_if_fini $h1 192.0.2.1/28
+}
+
+h2_create()
+{
+	simple_if_init $h2 198.51.100.1/28
+
+	ip -4 route add default vrf v$h2 nexthop via 198.51.100.2
+}
+
+h2_destroy()
+{
+	ip -4 route del default vrf v$h2 nexthop via 198.51.100.2
+
+	simple_if_fini $h2 198.51.100.1/28
+}
+
+h3_create()
+{
+	ip link set dev $h3 down
+	ip link add name ${h3}_bond type bond mode 802.3ad
+	ip link set dev $h3 master ${h3}_bond
+
+	simple_if_init ${h3}_bond 192.0.2.17/28
+
+	ip -4 route add default vrf v${h3}_bond nexthop via 192.0.2.18
+}
+
+h3_destroy()
+{
+	ip -4 route del default vrf v${h3}_bond nexthop via 192.0.2.18
+
+	simple_if_fini ${h3}_bond 192.0.2.17/28
+
+	ip link set dev $h3 nomaster
+	ip link del dev ${h3}_bond
+}
+
+h4_create()
+{
+	ip link set dev $h4 down
+	ip link add name ${h4}_bond type bond mode 802.3ad
+	ip link set dev $h4 master ${h4}_bond
+
+	simple_if_init ${h4}_bond 198.51.100.17/28
+
+	ip -4 route add default vrf v${h4}_bond nexthop via 198.51.100.18
+}
+
+h4_destroy()
+{
+	ip -4 route del default vrf v${h4}_bond nexthop via 198.51.100.18
+
+	simple_if_fini ${h4}_bond 198.51.100.17/28
+
+	ip link set dev $h4 nomaster
+	ip link del dev ${h4}_bond
+}
+
+router_create()
+{
+	ip link set dev $rp1 up
+	__addr_add_del $rp1 add 192.0.2.2/28
+	tc qdisc add dev $rp1 clsact
+
+	ip link set dev $rp2 up
+	__addr_add_del $rp2 add 198.51.100.2/28
+	tc qdisc add dev $rp2 clsact
+
+	ip link add name ${rp3}_bond type bond mode 802.3ad
+	ip link set dev $rp3 master ${rp3}_bond
+	__addr_add_del ${rp3}_bond add 192.0.2.18/28
+	tc qdisc add dev $rp3 clsact
+	ip link set dev ${rp3}_bond up
+
+	ip link add name ${rp4}_bond type bond mode 802.3ad
+	ip link set dev $rp4 master ${rp4}_bond
+	__addr_add_del ${rp4}_bond add 198.51.100.18/28
+	tc qdisc add dev $rp4 clsact
+	ip link set dev ${rp4}_bond up
+}
+
+router_destroy()
+{
+	ip link set dev ${rp4}_bond down
+	tc qdisc del dev $rp4 clsact
+	__addr_add_del ${rp4}_bond del 198.51.100.18/28
+	ip link set dev $rp4 nomaster
+	ip link del dev ${rp4}_bond
+
+	ip link set dev ${rp3}_bond down
+	tc qdisc del dev $rp3 clsact
+	__addr_add_del ${rp3}_bond del 192.0.2.18/28
+	ip link set dev $rp3 nomaster
+	ip link del dev ${rp3}_bond
+
+	tc qdisc del dev $rp2 clsact
+	__addr_add_del $rp2 del 198.51.100.2/28
+	ip link set dev $rp2 down
+
+	tc qdisc del dev $rp1 clsact
+	__addr_add_del $rp1 del 192.0.2.2/28
+	ip link set dev $rp1 down
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	rp1=${NETIFS[p2]}
+	rp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+	h3=${NETIFS[p5]}
+	rp3=${NETIFS[p6]}
+	h4=${NETIFS[p7]}
+	rp4=${NETIFS[p8]}
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+	h3_create
+	h4_create
+	router_create
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	rm -f $CAPTURE_FILE
+
+	router_destroy
+	h4_destroy
+	h3_destroy
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+}
+
+psample_capture_start()
+{
+	rm -f $CAPTURE_FILE
+
+	psample &> $CAPTURE_FILE &
+
+	sleep 1
+}
+
+psample_capture_stop()
+{
+	{ kill %% && wait %%; } 2>/dev/null
+}
+
+__tc_sample_rate_test()
+{
+	local desc=$1; shift
+	local dip=$1; shift
+	local pkts pct
+
+	RET=0
+
+	tc filter add dev $rp1 ingress protocol all pref 1 handle 101 matchall \
+		skip_sw action sample rate 32 group 1
+	check_err $? "Failed to configure sampling rule"
+
+	psample_capture_start
+
+	ip vrf exec v$h1 $MZ $h1 -c 320000 -d 100usec -p 64 -A 192.0.2.1 \
+		-B $dip -t udp dp=52768,sp=42768 -q
+
+	psample_capture_stop
+
+	pkts=$(grep -e "group 1 " $CAPTURE_FILE | wc -l)
+	pct=$((100 * (pkts - 10000) / 10000))
+	(( -25 <= pct && pct <= 25))
+	check_err $? "Expected 10000 packets, got $pkts packets, which is $pct% off. Required accuracy is +-25%"
+
+	log_test "tc sample rate ($desc)"
+
+	tc filter del dev $rp1 ingress protocol all pref 1 handle 101 matchall
+}
+
+tc_sample_rate_test()
+{
+	__tc_sample_rate_test "forward" 198.51.100.1
+	__tc_sample_rate_test "local receive" 192.0.2.2
+}
+
+tc_sample_max_rate_test()
+{
+	RET=0
+
+	tc filter add dev $rp1 ingress protocol all pref 1 handle 101 matchall \
+		skip_sw action sample rate $((35 * 10 ** 8)) group 1
+	check_err $? "Failed to configure sampling rule with max rate"
+
+	tc filter del dev $rp1 ingress protocol all pref 1 handle 101 matchall
+
+	tc filter add dev $rp1 ingress protocol all pref 1 handle 101 matchall \
+		skip_sw action sample rate $((35 * 10 ** 8 + 1)) \
+		group 1 &> /dev/null
+	check_fail $? "Managed to configure sampling rate above maximum"
+
+	log_test "tc sample maximum rate"
+}
+
+tc_sample_conflict_test()
+{
+	RET=0
+
+	# Test that two sampling rules cannot be configured on the same port,
+	# even when they share the same parameters.
+
+	tc filter add dev $rp1 ingress protocol all pref 1 handle 101 matchall \
+		skip_sw action sample rate 1024 group 1
+	check_err $? "Failed to configure sampling rule"
+
+	tc filter add dev $rp1 ingress protocol all pref 2 handle 102 matchall \
+		skip_sw action sample rate 1024 group 1 &> /dev/null
+	check_fail $? "Managed to configure second sampling rule"
+
+	# Delete the first rule and make sure the second rule can now be
+	# configured.
+
+	tc filter del dev $rp1 ingress protocol all pref 1 handle 101 matchall
+
+	tc filter add dev $rp1 ingress protocol all pref 2 handle 102 matchall \
+		skip_sw action sample rate 1024 group 1
+	check_err $? "Failed to configure sampling rule after deletion"
+
+	log_test "tc sample conflict test"
+
+	tc filter del dev $rp1 ingress protocol all pref 2 handle 102 matchall
+}
+
+tc_sample_group_conflict_test()
+{
+	RET=0
+
+	# Test that two sampling rules cannot be configured on the same port
+	# with different groups.
+
+	tc filter add dev $rp1 ingress protocol all pref 1 handle 101 matchall \
+		skip_sw action sample rate 1024 group 1
+	check_err $? "Failed to configure sampling rule"
+
+	tc filter add dev $rp1 ingress protocol all pref 2 handle 102 matchall \
+		skip_sw action sample rate 1024 group 2 &> /dev/null
+	check_fail $? "Managed to configure sampling rule with conflicting group"
+
+	log_test "tc sample group conflict test"
+
+	tc filter del dev $rp1 ingress protocol all pref 1 handle 101 matchall
+}
+
+tc_sample_md_iif_test()
+{
+	local rp1_ifindex
+
+	RET=0
+
+	tc filter add dev $rp1 ingress protocol all pref 1 handle 101 matchall \
+		skip_sw action sample rate 5 group 1
+	check_err $? "Failed to configure sampling rule"
+
+	psample_capture_start
+
+	ip vrf exec v$h1 $MZ $h1 -c 3200 -d 1msec -p 64 -A 192.0.2.1 \
+		-B 198.51.100.1 -t udp dp=52768,sp=42768 -q
+
+	psample_capture_stop
+
+	rp1_ifindex=$(ip -j -p link show dev $rp1 | jq '.[]["ifindex"]')
+	grep -q -e "in-ifindex $rp1_ifindex " $CAPTURE_FILE
+	check_err $? "Sampled packets do not have expected in-ifindex"
+
+	log_test "tc sample iif"
+
+	tc filter del dev $rp1 ingress protocol all pref 1 handle 101 matchall
+}
+
+tc_sample_md_lag_iif_test()
+{
+	local rp3_ifindex
+
+	RET=0
+
+	tc filter add dev $rp3 ingress protocol all pref 1 handle 101 matchall \
+		skip_sw action sample rate 5 group 1
+	check_err $? "Failed to configure sampling rule"
+
+	psample_capture_start
+
+	ip vrf exec v${h3}_bond $MZ ${h3}_bond -c 3200 -d 1msec -p 64 \
+		-A 192.0.2.17 -B 198.51.100.17 -t udp dp=52768,sp=42768 -q
+
+	psample_capture_stop
+
+	rp3_ifindex=$(ip -j -p link show dev $rp3 | jq '.[]["ifindex"]')
+	grep -q -e "in-ifindex $rp3_ifindex " $CAPTURE_FILE
+	check_err $? "Sampled packets do not have expected in-ifindex"
+
+	log_test "tc sample lag iif"
+
+	tc filter del dev $rp3 ingress protocol all pref 1 handle 101 matchall
+}
+
+tc_sample_md_oif_test()
+{
+	local rp2_ifindex
+
+	RET=0
+
+	tc filter add dev $rp1 ingress protocol all pref 1 handle 101 matchall \
+		skip_sw action sample rate 5 group 1
+	check_err $? "Failed to configure sampling rule"
+
+	psample_capture_start
+
+	ip vrf exec v$h1 $MZ $h1 -c 3200 -d 1msec -p 64 -A 192.0.2.1 \
+		-B 198.51.100.1 -t udp dp=52768,sp=42768 -q
+
+	psample_capture_stop
+
+	rp2_ifindex=$(ip -j -p link show dev $rp2 | jq '.[]["ifindex"]')
+	grep -q -e "out-ifindex $rp2_ifindex " $CAPTURE_FILE
+	check_err $? "Sampled packets do not have expected out-ifindex"
+
+	log_test "tc sample oif"
+
+	tc filter del dev $rp1 ingress protocol all pref 1 handle 101 matchall
+}
+
+tc_sample_md_lag_oif_test()
+{
+	local rp4_ifindex
+
+	RET=0
+
+	tc filter add dev $rp3 ingress protocol all pref 1 handle 101 matchall \
+		skip_sw action sample rate 5 group 1
+	check_err $? "Failed to configure sampling rule"
+
+	psample_capture_start
+
+	ip vrf exec v${h3}_bond $MZ ${h3}_bond -c 3200 -d 1msec -p 64 \
+		-A 192.0.2.17 -B 198.51.100.17 -t udp dp=52768,sp=42768 -q
+
+	psample_capture_stop
+
+	rp4_ifindex=$(ip -j -p link show dev $rp4 | jq '.[]["ifindex"]')
+	grep -q -e "out-ifindex $rp4_ifindex " $CAPTURE_FILE
+	check_err $? "Sampled packets do not have expected out-ifindex"
+
+	log_test "tc sample lag oif"
+
+	tc filter del dev $rp3 ingress protocol all pref 1 handle 101 matchall
+}
+
+tc_sample_md_out_tc_test()
+{
+	RET=0
+
+	# Output traffic class is not supported on Spectrum-1.
+	mlxsw_only_on_spectrum 2+ || return
+
+	tc filter add dev $rp1 ingress protocol all pref 1 handle 101 matchall \
+		skip_sw action sample rate 5 group 1
+	check_err $? "Failed to configure sampling rule"
+
+	# By default, all the packets should go to the same traffic class (0).
+
+	psample_capture_start
+
+	ip vrf exec v$h1 $MZ $h1 -c 3200 -d 1msec -p 64 -A 192.0.2.1 \
+		-B 198.51.100.1 -t udp dp=52768,sp=42768 -q
+
+	psample_capture_stop
+
+	grep -q -e "out-tc 0 " $CAPTURE_FILE
+	check_err $? "Sampled packets do not have expected out-tc (0)"
+
+	# Map all priorities to highest traffic class (7) and check reported
+	# out-tc.
+	tc qdisc replace dev $rp2 root handle 1: \
+		prio bands 3 priomap 0 0 0 0 0 0 0 0
+
+	psample_capture_start
+
+	ip vrf exec v$h1 $MZ $h1 -c 3200 -d 1msec -p 64 -A 192.0.2.1 \
+		-B 198.51.100.1 -t udp dp=52768,sp=42768 -q
+
+	psample_capture_stop
+
+	grep -q -e "out-tc 7 " $CAPTURE_FILE
+	check_err $? "Sampled packets do not have expected out-tc (7)"
+
+	log_test "tc sample out-tc"
+
+	tc qdisc del dev $rp2 root handle 1:
+	tc filter del dev $rp1 ingress protocol all pref 1 handle 101 matchall
+}
+
+tc_sample_md_out_tc_occ_test()
+{
+	local backlog pct occ
+
+	RET=0
+
+	# Output traffic class occupancy is not supported on Spectrum-1.
+	mlxsw_only_on_spectrum 2+ || return
+
+	tc filter add dev $rp1 ingress protocol all pref 1 handle 101 matchall \
+		skip_sw action sample rate 1024 group 1
+	check_err $? "Failed to configure sampling rule"
+
+	# Configure a shaper on egress to create congestion.
+	tc qdisc replace dev $rp2 root handle 1: \
+		tbf rate 1Mbit burst 256k limit 1M
+
+	psample_capture_start
+
+	ip vrf exec v$h1 $MZ $h1 -c 0 -d 1usec -p 1400 -A 192.0.2.1 \
+		-B 198.51.100.1 -t udp dp=52768,sp=42768 -q &
+
+	# Allow congestion to reach steady state.
+	sleep 10
+
+	backlog=$(tc -j -p -s qdisc show dev $rp2 | jq '.[0]["backlog"]')
+
+	# Kill mausezahn.
+	{ kill %% && wait %%; } 2>/dev/null
+
+	psample_capture_stop
+
+	# Record last congestion sample.
+	occ=$(grep -e "out-tc-occ " $CAPTURE_FILE | tail -n 1 | \
+		cut -d ' ' -f 16)
+
+	pct=$((100 * (occ - backlog) / backlog))
+	(( -1 <= pct && pct <= 1))
+	check_err $? "Recorded a congestion of $backlog bytes, but sampled congestion is $occ bytes, which is $pct% off. Required accuracy is +-5%"
+
+	log_test "tc sample out-tc-occ"
+
+	tc qdisc del dev $rp2 root handle 1:
+	tc filter del dev $rp1 ingress protocol all pref 1 handle 101 matchall
+}
+
+tc_sample_md_latency_test()
+{
+	RET=0
+
+	# Egress sampling not supported on Spectrum-1.
+	mlxsw_only_on_spectrum 2+ || return
+
+	tc filter add dev $rp2 egress protocol all pref 1 handle 101 matchall \
+		skip_sw action sample rate 5 group 1
+	check_err $? "Failed to configure sampling rule"
+
+	psample_capture_start
+
+	ip vrf exec v$h1 $MZ $h1 -c 3200 -d 1msec -p 64 -A 192.0.2.1 \
+		-B 198.51.100.1 -t udp dp=52768,sp=42768 -q
+
+	psample_capture_stop
+
+	grep -q -e "latency " $CAPTURE_FILE
+	check_err $? "Sampled packets do not have latency attribute"
+
+	log_test "tc sample latency"
+
+	tc filter del dev $rp2 egress protocol all pref 1 handle 101 matchall
+}
+
+tc_sample_acl_group_conflict_test()
+{
+	RET=0
+
+	# Test that two flower sampling rules cannot be configured on the same
+	# port with different groups.
+
+	# Policy-based sampling is not supported on Spectrum-1.
+	mlxsw_only_on_spectrum 2+ || return
+
+	tc filter add dev $rp1 ingress protocol ip pref 1 handle 101 flower \
+		skip_sw action sample rate 1024 group 1
+	check_err $? "Failed to configure sampling rule"
+
+	tc filter add dev $rp1 ingress protocol ip pref 2 handle 102 flower \
+		skip_sw action sample rate 1024 group 1
+	check_err $? "Failed to configure sampling rule with same group"
+
+	tc filter add dev $rp1 ingress protocol ip pref 3 handle 103 flower \
+		skip_sw action sample rate 1024 group 2 &> /dev/null
+	check_fail $? "Managed to configure sampling rule with conflicting group"
+
+	log_test "tc sample (w/ flower) group conflict test"
+
+	tc filter del dev $rp1 ingress protocol ip pref 2 handle 102 flower
+	tc filter del dev $rp1 ingress protocol ip pref 1 handle 101 flower
+}
+
+__tc_sample_acl_rate_test()
+{
+	local bind=$1; shift
+	local port=$1; shift
+	local pkts pct
+
+	RET=0
+
+	# Policy-based sampling is not supported on Spectrum-1.
+	mlxsw_only_on_spectrum 2+ || return
+
+	tc filter add dev $port $bind protocol ip pref 1 handle 101 flower \
+		skip_sw dst_ip 198.51.100.1 action sample rate 32 group 1
+	check_err $? "Failed to configure sampling rule"
+
+	psample_capture_start
+
+	ip vrf exec v$h1 $MZ $h1 -c 320000 -d 100usec -p 64 -A 192.0.2.1 \
+		-B 198.51.100.1 -t udp dp=52768,sp=42768 -q
+
+	psample_capture_stop
+
+	pkts=$(grep -e "group 1 " $CAPTURE_FILE | wc -l)
+	pct=$((100 * (pkts - 10000) / 10000))
+	(( -25 <= pct && pct <= 25))
+	check_err $? "Expected 10000 packets, got $pkts packets, which is $pct% off. Required accuracy is +-25%"
+
+	# Setup a filter that should not match any packet and make sure packets
+	# are not sampled.
+	tc filter del dev $port $bind protocol ip pref 1 handle 101 flower
+
+	tc filter add dev $port $bind protocol ip pref 1 handle 101 flower \
+		skip_sw dst_ip 198.51.100.10 action sample rate 32 group 1
+	check_err $? "Failed to configure sampling rule"
+
+	psample_capture_start
+
+	ip vrf exec v$h1 $MZ $h1 -c 3200 -d 1msec -p 64 -A 192.0.2.1 \
+		-B 198.51.100.1 -t udp dp=52768,sp=42768 -q
+
+	psample_capture_stop
+
+	grep -q -e "group 1 " $CAPTURE_FILE
+	check_fail $? "Sampled packets when should not"
+
+	log_test "tc sample (w/ flower) rate ($bind)"
+
+	tc filter del dev $port $bind protocol ip pref 1 handle 101 flower
+}
+
+tc_sample_acl_rate_test()
+{
+	__tc_sample_acl_rate_test ingress $rp1
+	__tc_sample_acl_rate_test egress $rp2
+}
+
+tc_sample_acl_max_rate_test()
+{
+	RET=0
+
+	# Policy-based sampling is not supported on Spectrum-1.
+	mlxsw_only_on_spectrum 2+ || return
+
+	tc filter add dev $rp1 ingress protocol ip pref 1 handle 101 flower \
+		skip_sw action sample rate $((2 ** 24 - 1)) group 1
+	check_err $? "Failed to configure sampling rule with max rate"
+
+	tc filter del dev $rp1 ingress protocol ip pref 1 handle 101 flower
+
+	tc filter add dev $rp1 ingress protocol ip pref 1 handle 101 flower \
+		skip_sw action sample rate $((2 ** 24)) \
+		group 1 &> /dev/null
+	check_fail $? "Managed to configure sampling rate above maximum"
+
+	log_test "tc sample (w/ flower) maximum rate"
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS