Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 227 insertions, 0 deletions

diff --git a/tools/testing/selftests/net/arp_ndisc_evict_nocarrier.sh b/tools/testing/selftests/net/arp_ndisc_evict_nocarrier.sh
new file mode 100755
index 000000000..4a110bb01
--- /dev/null
+++ b/tools/testing/selftests/net/arp_ndisc_evict_nocarrier.sh
@@ -0,0 +1,227 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Tests sysctl options {arp,ndisc}_evict_nocarrier={0,1}
+#
+# Create a veth pair and set IPs/routes on both. Then ping to establish
+# an entry in the ARP/ND table. Depending on the test set sysctl option to
+# 1 or 0. Set remote veth down which will cause local veth to go into a no
+# carrier state. Depending on the test check the ARP/ND table:
+#
+# {arp,ndisc}_evict_nocarrier=1 should contain no ARP/ND after no carrier
+# {arp,ndisc}_evict_nocarrer=0 should still contain the single ARP/ND entry
+#
+
+readonly PEER_NS="ns-peer-$(mktemp -u XXXXXX)"
+readonly V4_ADDR0=10.0.10.1
+readonly V4_ADDR1=10.0.10.2
+readonly V6_ADDR0=2001:db8:91::1
+readonly V6_ADDR1=2001:db8:91::2
+nsid=100
+ret=0
+
+cleanup_v6()
+{
+    ip netns del me
+    ip netns del peer
+
+    sysctl -w net.ipv6.conf.veth1.ndisc_evict_nocarrier=1 >/dev/null 2>&1
+    sysctl -w net.ipv6.conf.all.ndisc_evict_nocarrier=1 >/dev/null 2>&1
+}
+
+create_ns()
+{
+    local n=${1}
+
+    ip netns del ${n} 2>/dev/null
+
+    ip netns add ${n}
+    ip netns set ${n} $((nsid++))
+    ip -netns ${n} link set lo up
+}
+
+
+setup_v6() {
+    create_ns me
+    create_ns peer
+
+    IP="ip -netns me"
+
+    $IP li add veth1 type veth peer name veth2
+    $IP li set veth1 up
+    $IP -6 addr add $V6_ADDR0/64 dev veth1 nodad
+    $IP li set veth2 netns peer up
+    ip -netns peer -6 addr add $V6_ADDR1/64 dev veth2 nodad
+
+    ip netns exec me sysctl -w $1 >/dev/null 2>&1
+
+    # Establish an ND cache entry
+    ip netns exec me ping -6 -c1 -Iveth1 $V6_ADDR1 >/dev/null 2>&1
+    # Should have the veth1 entry in ND table
+    ip netns exec me ip -6 neigh get $V6_ADDR1 dev veth1 >/dev/null 2>&1
+    if [ $? -ne 0 ]; then
+        cleanup_v6
+        echo "failed"
+        exit 1
+    fi
+
+    # Set veth2 down, which will put veth1 in NOCARRIER state
+    ip netns exec peer ip link set veth2 down
+}
+
+setup_v4() {
+    ip netns add "${PEER_NS}"
+    ip link add name veth0 type veth peer name veth1
+    ip link set dev veth0 up
+    ip link set dev veth1 netns "${PEER_NS}"
+    ip netns exec "${PEER_NS}" ip link set dev veth1 up
+    ip addr add $V4_ADDR0/24 dev veth0
+    ip netns exec "${PEER_NS}" ip addr add $V4_ADDR1/24 dev veth1
+    ip netns exec ${PEER_NS} ip route add default via $V4_ADDR1 dev veth1
+    ip route add default via $V4_ADDR0 dev veth0
+
+    sysctl -w "$1" >/dev/null 2>&1
+
+    # Establish an ARP cache entry
+    ping -c1 -I veth0 $V4_ADDR1 -q >/dev/null 2>&1
+    # Should have the veth1 entry in ARP table
+    ip neigh get $V4_ADDR1 dev veth0 >/dev/null 2>&1
+    if [ $? -ne 0 ]; then
+        cleanup_v4
+        echo "failed"
+        exit 1
+    fi
+
+    # Set veth1 down, which will put veth0 in NOCARRIER state
+    ip netns exec "${PEER_NS}" ip link set veth1 down
+}
+
+cleanup_v4() {
+    ip neigh flush dev veth0
+    ip link del veth0
+    local -r ns="$(ip netns list|grep $PEER_NS)"
+    [ -n "$ns" ] && ip netns del $ns 2>/dev/null
+
+    sysctl -w net.ipv4.conf.veth0.arp_evict_nocarrier=1 >/dev/null 2>&1
+    sysctl -w net.ipv4.conf.all.arp_evict_nocarrier=1 >/dev/null 2>&1
+}
+
+# Run test when arp_evict_nocarrier = 1 (default).
+run_arp_evict_nocarrier_enabled() {
+    echo "run arp_evict_nocarrier=1 test"
+    setup_v4 "net.ipv4.conf.veth0.arp_evict_nocarrier=1"
+
+    # ARP table should be empty
+    ip neigh get $V4_ADDR1 dev veth0 >/dev/null 2>&1
+
+    if [ $? -eq 0 ];then
+        echo "failed"
+        ret=1
+    else
+        echo "ok"
+    fi
+
+    cleanup_v4
+}
+
+# Run test when arp_evict_nocarrier = 0
+run_arp_evict_nocarrier_disabled() {
+    echo "run arp_evict_nocarrier=0 test"
+    setup_v4 "net.ipv4.conf.veth0.arp_evict_nocarrier=0"
+
+    # ARP table should still contain the entry
+    ip neigh get $V4_ADDR1 dev veth0 >/dev/null 2>&1
+
+    if [ $? -eq 0 ];then
+        echo "ok"
+    else
+        echo "failed"
+        ret=1
+    fi
+
+    cleanup_v4
+}
+
+run_arp_evict_nocarrier_disabled_all() {
+    echo "run all.arp_evict_nocarrier=0 test"
+    setup_v4 "net.ipv4.conf.all.arp_evict_nocarrier=0"
+
+    # ARP table should still contain the entry
+    ip neigh get $V4_ADDR1 dev veth0 >/dev/null 2>&1
+
+    if [ $? -eq 0 ];then
+        echo "ok"
+    else
+        echo "failed"
+    fi
+
+    cleanup_v4
+}
+
+run_ndisc_evict_nocarrier_enabled() {
+    echo "run ndisc_evict_nocarrier=1 test"
+
+    setup_v6 "net.ipv6.conf.veth1.ndisc_evict_nocarrier=1"
+
+    ip netns exec me ip -6 neigh get $V6_ADDR1 dev veth1 >/dev/null 2>&1
+
+    if [ $? -eq 0 ];then
+        echo "failed"
+        ret=1
+    else
+        echo "ok"
+    fi
+
+    cleanup_v6
+}
+
+run_ndisc_evict_nocarrier_disabled() {
+    echo "run ndisc_evict_nocarrier=0 test"
+
+    setup_v6 "net.ipv6.conf.veth1.ndisc_evict_nocarrier=0"
+
+    ip netns exec me ip -6 neigh get $V6_ADDR1 dev veth1 >/dev/null 2>&1
+
+    if [ $? -eq 0 ];then
+        echo "ok"
+    else
+        echo "failed"
+        ret=1
+    fi
+
+    cleanup_v6
+}
+
+run_ndisc_evict_nocarrier_disabled_all() {
+    echo "run all.ndisc_evict_nocarrier=0 test"
+
+    setup_v6 "net.ipv6.conf.all.ndisc_evict_nocarrier=0"
+
+    ip netns exec me ip -6 neigh get $V6_ADDR1 dev veth1 >/dev/null 2>&1
+
+    if [ $? -eq 0 ];then
+        echo "ok"
+    else
+        echo "failed"
+        ret=1
+    fi
+
+    cleanup_v6
+}
+
+run_all_tests() {
+    run_arp_evict_nocarrier_enabled
+    run_arp_evict_nocarrier_disabled
+    run_arp_evict_nocarrier_disabled_all
+    run_ndisc_evict_nocarrier_enabled
+    run_ndisc_evict_nocarrier_disabled
+    run_ndisc_evict_nocarrier_disabled_all
+}
+
+if [ "$(id -u)" -ne 0 ];then
+	echo "SKIP: Need root privileges"
+	exit $ksft_skip;
+fi
+
+run_all_tests
+exit $ret