Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 249 insertions, 0 deletions

diff --git a/tools/testing/selftests/net/forwarding/tsn_lib.sh b/tools/testing/selftests/net/forwarding/tsn_lib.sh
new file mode 100644
index 000000000..b91bcd800
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/tsn_lib.sh
@@ -0,0 +1,249 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright 2021-2022 NXP
+
+REQUIRE_ISOCHRON=${REQUIRE_ISOCHRON:=yes}
+REQUIRE_LINUXPTP=${REQUIRE_LINUXPTP:=yes}
+
+# Tunables
+UTC_TAI_OFFSET=37
+ISOCHRON_CPU=1
+
+if [[ "$REQUIRE_ISOCHRON" = "yes" ]]; then
+	# https://github.com/vladimiroltean/tsn-scripts
+	# WARNING: isochron versions pre-1.0 are unstable,
+	# always use the latest version
+	require_command isochron
+fi
+if [[ "$REQUIRE_LINUXPTP" = "yes" ]]; then
+	require_command phc2sys
+	require_command ptp4l
+fi
+
+phc2sys_start()
+{
+	local uds_address=$1
+	local extra_args=""
+
+	if ! [ -z "${uds_address}" ]; then
+		extra_args="${extra_args} -z ${uds_address}"
+	fi
+
+	phc2sys_log="$(mktemp)"
+
+	chrt -f 10 phc2sys -m \
+		-a -rr \
+		--step_threshold 0.00002 \
+		--first_step_threshold 0.00002 \
+		${extra_args} \
+		> "${phc2sys_log}" 2>&1 &
+	phc2sys_pid=$!
+
+	echo "phc2sys logs to ${phc2sys_log} and has pid ${phc2sys_pid}"
+
+	sleep 1
+}
+
+phc2sys_stop()
+{
+	{ kill ${phc2sys_pid} && wait ${phc2sys_pid}; } 2> /dev/null
+	rm "${phc2sys_log}" 2> /dev/null
+}
+
+# Replace space separators from interface list with underscores
+if_names_to_label()
+{
+	local if_name_list="$1"
+
+	echo "${if_name_list/ /_}"
+}
+
+ptp4l_start()
+{
+	local if_names="$1"
+	local slave_only=$2
+	local uds_address=$3
+	local log="ptp4l_log_$(if_names_to_label ${if_names})"
+	local pid="ptp4l_pid_$(if_names_to_label ${if_names})"
+	local extra_args=""
+
+	for if_name in ${if_names}; do
+		extra_args="${extra_args} -i ${if_name}"
+	done
+
+	if [ "${slave_only}" = true ]; then
+		extra_args="${extra_args} -s"
+	fi
+
+	# declare dynamic variables ptp4l_log_${if_name} and ptp4l_pid_${if_name}
+	# as global, so that they can be referenced later
+	declare -g "${log}=$(mktemp)"
+
+	chrt -f 10 ptp4l -m -2 -P \
+		--step_threshold 0.00002 \
+		--first_step_threshold 0.00002 \
+		--tx_timestamp_timeout 100 \
+		--uds_address="${uds_address}" \
+		${extra_args} \
+		> "${!log}" 2>&1 &
+	declare -g "${pid}=$!"
+
+	echo "ptp4l for interfaces ${if_names} logs to ${!log} and has pid ${!pid}"
+
+	sleep 1
+}
+
+ptp4l_stop()
+{
+	local if_names="$1"
+	local log="ptp4l_log_$(if_names_to_label ${if_names})"
+	local pid="ptp4l_pid_$(if_names_to_label ${if_names})"
+
+	{ kill ${!pid} && wait ${!pid}; } 2> /dev/null
+	rm "${!log}" 2> /dev/null
+}
+
+cpufreq_max()
+{
+	local cpu=$1
+	local freq="cpu${cpu}_freq"
+	local governor="cpu${cpu}_governor"
+
+	# Kernel may be compiled with CONFIG_CPU_FREQ disabled
+	if ! [ -d /sys/bus/cpu/devices/cpu${cpu}/cpufreq ]; then
+		return
+	fi
+
+	# declare dynamic variables cpu${cpu}_freq and cpu${cpu}_governor as
+	# global, so they can be referenced later
+	declare -g "${freq}=$(cat /sys/bus/cpu/devices/cpu${cpu}/cpufreq/scaling_min_freq)"
+	declare -g "${governor}=$(cat /sys/bus/cpu/devices/cpu${cpu}/cpufreq/scaling_governor)"
+
+	cat /sys/bus/cpu/devices/cpu${cpu}/cpufreq/scaling_max_freq > \
+		/sys/bus/cpu/devices/cpu${cpu}/cpufreq/scaling_min_freq
+	echo -n "performance" > \
+		/sys/bus/cpu/devices/cpu${cpu}/cpufreq/scaling_governor
+}
+
+cpufreq_restore()
+{
+	local cpu=$1
+	local freq="cpu${cpu}_freq"
+	local governor="cpu${cpu}_governor"
+
+	if ! [ -d /sys/bus/cpu/devices/cpu${cpu}/cpufreq ]; then
+		return
+	fi
+
+	echo "${!freq}" > /sys/bus/cpu/devices/cpu${cpu}/cpufreq/scaling_min_freq
+	echo -n "${!governor}" > \
+		/sys/bus/cpu/devices/cpu${cpu}/cpufreq/scaling_governor
+}
+
+isochron_recv_start()
+{
+	local if_name=$1
+	local uds=$2
+	local stats_port=$3
+	local extra_args=$4
+	local pid="isochron_pid_${stats_port}"
+
+	if ! [ -z "${uds}" ]; then
+		extra_args="${extra_args} --unix-domain-socket ${uds}"
+	fi
+
+	isochron rcv \
+		--interface ${if_name} \
+		--sched-priority 98 \
+		--sched-fifo \
+		--utc-tai-offset ${UTC_TAI_OFFSET} \
+		--stats-port ${stats_port} \
+		--quiet \
+		${extra_args} & \
+	declare -g "${pid}=$!"
+
+	sleep 1
+}
+
+isochron_recv_stop()
+{
+	local stats_port=$1
+	local pid="isochron_pid_${stats_port}"
+
+	{ kill ${!pid} && wait ${!pid}; } 2> /dev/null
+}
+
+isochron_do()
+{
+	local sender_if_name=$1; shift
+	local receiver_if_name=$1; shift
+	local sender_uds=$1; shift
+	local receiver_uds=$1; shift
+	local base_time=$1; shift
+	local cycle_time=$1; shift
+	local shift_time=$1; shift
+	local num_pkts=$1; shift
+	local vid=$1; shift
+	local priority=$1; shift
+	local dst_ip=$1; shift
+	local isochron_dat=$1; shift
+	local extra_args=""
+	local receiver_extra_args=""
+	local vrf="$(master_name_get ${sender_if_name})"
+	local use_l2="true"
+
+	if ! [ -z "${dst_ip}" ]; then
+		use_l2="false"
+	fi
+
+	if ! [ -z "${vrf}" ]; then
+		dst_ip="${dst_ip}%${vrf}"
+	fi
+
+	if ! [ -z "${vid}" ]; then
+		vid="--vid=${vid}"
+	fi
+
+	if [ -z "${receiver_uds}" ]; then
+		extra_args="${extra_args} --omit-remote-sync"
+	fi
+
+	if ! [ -z "${shift_time}" ]; then
+		extra_args="${extra_args} --shift-time=${shift_time}"
+	fi
+
+	if [ "${use_l2}" = "true" ]; then
+		extra_args="${extra_args} --l2 --etype=0xdead ${vid}"
+		receiver_extra_args="--l2 --etype=0xdead"
+	else
+		extra_args="${extra_args} --l4 --ip-destination=${dst_ip}"
+		receiver_extra_args="--l4"
+	fi
+
+	cpufreq_max ${ISOCHRON_CPU}
+
+	isochron_recv_start "${h2}" "${receiver_uds}" 5000 "${receiver_extra_args}"
+
+	isochron send \
+		--interface ${sender_if_name} \
+		--unix-domain-socket ${sender_uds} \
+		--priority ${priority} \
+		--base-time ${base_time} \
+		--cycle-time ${cycle_time} \
+		--num-frames ${num_pkts} \
+		--frame-size 64 \
+		--txtime \
+		--utc-tai-offset ${UTC_TAI_OFFSET} \
+		--cpu-mask $((1 << ${ISOCHRON_CPU})) \
+		--sched-fifo \
+		--sched-priority 98 \
+		--client 127.0.0.1 \
+		--sync-threshold 5000 \
+		--output-file ${isochron_dat} \
+		${extra_args} \
+		--quiet
+
+	isochron_recv_stop 5000
+
+	cpufreq_restore ${ISOCHRON_CPU}
+}