Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 577 insertions, 0 deletions

diff --git a/tools/testing/selftests/net/forwarding/vxlan_asymmetric.sh b/tools/testing/selftests/net/forwarding/vxlan_asymmetric.sh
new file mode 100755
index 000000000..43469c7de
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/vxlan_asymmetric.sh
@@ -0,0 +1,577 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# +---------------------------+                +------------------------------+
+# |                    vrf-h1 |                |                       vrf-h2 |
+# |    + $h1                  |                |    + $h2                     |
+# |    | 10.1.1.101/24        |                |    | 10.1.2.101/24           |
+# |    | default via 10.1.1.1 |                |    | default via 10.1.2.1    |
+# +----|----------------------+                +----|-------------------------+
+#      |                                            |
+# +----|--------------------------------------------|-------------------------+
+# | SW |                                            |                         |
+# | +--|--------------------------------------------|-----------------------+ |
+# | |  + $swp1                         br1          + $swp2                 | |
+# | |     vid 10 pvid untagged                         vid 20 pvid untagged | |
+# | |                                                                       | |
+# | |  + vx10                                       + vx20                  | |
+# | |    local 10.0.0.1                               local 10.0.0.1        | |
+# | |    remote 10.0.0.2                              remote 10.0.0.2       | |
+# | |    id 1000                                      id 2000               | |
+# | |    dstport 4789                                 dstport 4789          | |
+# | |    vid 10 pvid untagged                         vid 20 pvid untagged  | |
+# | |                                                                       | |
+# | +-----------------------------------+-----------------------------------+ |
+# |                                     |                                     |
+# | +-----------------------------------|-----------------------------------+ |
+# | |                                   |                                   | |
+# | |  +--------------------------------+--------------------------------+  | |
+# | |  |                                                                 |  | |
+# | |  + vlan10                                                   vlan20 +  | |
+# | |  | 10.1.1.11/24                                       10.1.2.11/24 |  | |
+# | |  |                                                                 |  | |
+# | |  + vlan10-v (macvlan)                           vlan20-v (macvlan) +  | |
+# | |    10.1.1.1/24                                         10.1.2.1/24    | |
+# | |    00:00:5e:00:01:01                             00:00:5e:00:01:01    | |
+# | |                               vrf-green                               | |
+# | +-----------------------------------------------------------------------+ |
+# |                                                                           |
+# |    + $rp1                                       +lo                       |
+# |    | 192.0.2.1/24                                10.0.0.1/32              |
+# +----|----------------------------------------------------------------------+
+#      |
+# +----|--------------------------------------------------------+
+# |    |                            vrf-spine                   |
+# |    + $rp2                                                   |
+# |      192.0.2.2/24                                           |
+# |                                                             |   (maybe) HW
+# =============================================================================
+# |                                                             |  (likely) SW
+# |                                                             |
+# |    + v1 (veth)                                              |
+# |    | 192.0.3.2/24                                           |
+# +----|--------------------------------------------------------+
+#      |
+# +----|----------------------------------------------------------------------+
+# |    + v2 (veth)                                  +lo           NS1 (netns) |
+# |      192.0.3.1/24                                10.0.0.2/32              |
+# |                                                                           |
+# | +-----------------------------------------------------------------------+ |
+# | |                               vrf-green                               | |
+# | |  + vlan10-v (macvlan)                           vlan20-v (macvlan) +  | |
+# | |  | 10.1.1.1/24                                         10.1.2.1/24 |  | |
+# | |  | 00:00:5e:00:01:01                             00:00:5e:00:01:01 |  | |
+# | |  |                                                                 |  | |
+# | |  + vlan10                                                   vlan20 +  | |
+# | |  | 10.1.1.12/24                                       10.1.2.12/24 |  | |
+# | |  |                                                                 |  | |
+# | |  +--------------------------------+--------------------------------+  | |
+# | |                                   |                                   | |
+# | +-----------------------------------|-----------------------------------+ |
+# |                                     |                                     |
+# | +-----------------------------------+-----------------------------------+ |
+# | |                                                                       | |
+# | |  + vx10                                     + vx20                    | |
+# | |    local 10.0.0.2                             local 10.0.0.2          | |
+# | |    remote 10.0.0.1                            remote 10.0.0.1         | |
+# | |    id 1000                                    id 2000                 | |
+# | |    dstport 4789                               dstport 4789            | |
+# | |    vid 10 pvid untagged                       vid 20 pvid untagged    | |
+# | |                                                                       | |
+# | |  + w1 (veth)                                + w3 (veth)               | |
+# | |  | vid 10 pvid untagged          br1        | vid 20 pvid untagged    | |
+# | +--|------------------------------------------|-------------------------+ |
+# |    |                                          |                           |
+# |    |                                          |                           |
+# | +--|----------------------+                +--|-------------------------+ |
+# | |  |               vrf-h1 |                |  |                  vrf-h2 | |
+# | |  + w2 (veth)            |                |  + w4 (veth)               | |
+# | |    10.1.1.102/24        |                |    10.1.2.102/24           | |
+# | |    default via 10.1.1.1 |                |    default via 10.1.2.1    | |
+# | +-------------------------+                +----------------------------+ |
+# +---------------------------------------------------------------------------+
+
+ALL_TESTS="
+	ping_ipv4
+	arp_decap
+	arp_suppression
+"
+NUM_NETIFS=6
+source lib.sh
+
+require_command $ARPING
+
+hx_create()
+{
+	local vrf_name=$1; shift
+	local if_name=$1; shift
+	local ip_addr=$1; shift
+	local gw_ip=$1; shift
+
+	vrf_create $vrf_name
+	ip link set dev $if_name master $vrf_name
+	ip link set dev $vrf_name up
+	ip link set dev $if_name up
+
+	ip address add $ip_addr/24 dev $if_name
+	ip neigh replace $gw_ip lladdr 00:00:5e:00:01:01 nud permanent \
+		dev $if_name
+	ip route add default vrf $vrf_name nexthop via $gw_ip
+}
+export -f hx_create
+
+hx_destroy()
+{
+	local vrf_name=$1; shift
+	local if_name=$1; shift
+	local ip_addr=$1; shift
+	local gw_ip=$1; shift
+
+	ip route del default vrf $vrf_name nexthop via $gw_ip
+	ip neigh del $gw_ip dev $if_name
+	ip address del $ip_addr/24 dev $if_name
+
+	ip link set dev $if_name down
+	vrf_destroy $vrf_name
+}
+
+h1_create()
+{
+	hx_create "vrf-h1" $h1 10.1.1.101 10.1.1.1
+}
+
+h1_destroy()
+{
+	hx_destroy "vrf-h1" $h1 10.1.1.101 10.1.1.1
+}
+
+h2_create()
+{
+	hx_create "vrf-h2" $h2 10.1.2.101 10.1.2.1
+}
+
+h2_destroy()
+{
+	hx_destroy "vrf-h2" $h2 10.1.2.101 10.1.2.1
+}
+
+switch_create()
+{
+	ip link add name br1 type bridge vlan_filtering 1 vlan_default_pvid 0 \
+		mcast_snooping 0
+	# Make sure the bridge uses the MAC address of the local port and not
+	# that of the VxLAN's device.
+	ip link set dev br1 address $(mac_get $swp1)
+	ip link set dev br1 up
+
+	ip link set dev $rp1 up
+	ip address add dev $rp1 192.0.2.1/24
+	ip route add 10.0.0.2/32 nexthop via 192.0.2.2
+
+	ip link add name vx10 type vxlan id 1000		\
+		local 10.0.0.1 remote 10.0.0.2 dstport 4789	\
+		nolearning noudpcsum tos inherit ttl 100
+	ip link set dev vx10 up
+
+	ip link set dev vx10 master br1
+	bridge vlan add vid 10 dev vx10 pvid untagged
+
+	ip link add name vx20 type vxlan id 2000		\
+		local 10.0.0.1 remote 10.0.0.2 dstport 4789	\
+		nolearning noudpcsum tos inherit ttl 100
+	ip link set dev vx20 up
+
+	ip link set dev vx20 master br1
+	bridge vlan add vid 20 dev vx20 pvid untagged
+
+	ip link set dev $swp1 master br1
+	ip link set dev $swp1 up
+	bridge vlan add vid 10 dev $swp1 pvid untagged
+
+	ip link set dev $swp2 master br1
+	ip link set dev $swp2 up
+	bridge vlan add vid 20 dev $swp2 pvid untagged
+
+	ip address add 10.0.0.1/32 dev lo
+
+	# Create SVIs
+	vrf_create "vrf-green"
+	ip link set dev vrf-green up
+
+	ip link add link br1 name vlan10 up master vrf-green type vlan id 10
+	ip address add 10.1.1.11/24 dev vlan10
+	ip link add link vlan10 name vlan10-v up master vrf-green \
+		address 00:00:5e:00:01:01 type macvlan mode private
+	ip address add 10.1.1.1/24 dev vlan10-v
+
+	ip link add link br1 name vlan20 up master vrf-green type vlan id 20
+	ip address add 10.1.2.11/24 dev vlan20
+	ip link add link vlan20 name vlan20-v up master vrf-green \
+		address 00:00:5e:00:01:01 type macvlan mode private
+	ip address add 10.1.2.1/24 dev vlan20-v
+
+	bridge vlan add vid 10 dev br1 self
+	bridge vlan add vid 20 dev br1 self
+
+	bridge fdb add 00:00:5e:00:01:01 dev br1 self local vlan 10
+	bridge fdb add 00:00:5e:00:01:01 dev br1 self local vlan 20
+
+	sysctl_set net.ipv4.conf.all.rp_filter 0
+	sysctl_set net.ipv4.conf.vlan10-v.rp_filter 0
+	sysctl_set net.ipv4.conf.vlan20-v.rp_filter 0
+}
+
+switch_destroy()
+{
+	sysctl_restore net.ipv4.conf.all.rp_filter
+
+	bridge fdb del 00:00:5e:00:01:01 dev br1 self local vlan 20
+	bridge fdb del 00:00:5e:00:01:01 dev br1 self local vlan 10
+
+	bridge vlan del vid 20 dev br1 self
+	bridge vlan del vid 10 dev br1 self
+
+	ip link del dev vlan20
+
+	ip link del dev vlan10
+
+	vrf_destroy "vrf-green"
+
+	ip address del 10.0.0.1/32 dev lo
+
+	bridge vlan del vid 20 dev $swp2
+	ip link set dev $swp2 down
+	ip link set dev $swp2 nomaster
+
+	bridge vlan del vid 10 dev $swp1
+	ip link set dev $swp1 down
+	ip link set dev $swp1 nomaster
+
+	bridge vlan del vid 20 dev vx20
+	ip link set dev vx20 nomaster
+
+	ip link set dev vx20 down
+	ip link del dev vx20
+
+	bridge vlan del vid 10 dev vx10
+	ip link set dev vx10 nomaster
+
+	ip link set dev vx10 down
+	ip link del dev vx10
+
+	ip route del 10.0.0.2/32 nexthop via 192.0.2.2
+	ip address del dev $rp1 192.0.2.1/24
+	ip link set dev $rp1 down
+
+	ip link set dev br1 down
+	ip link del dev br1
+}
+
+spine_create()
+{
+	vrf_create "vrf-spine"
+	ip link set dev $rp2 master vrf-spine
+	ip link set dev v1 master vrf-spine
+	ip link set dev vrf-spine up
+	ip link set dev $rp2 up
+	ip link set dev v1 up
+
+	ip address add 192.0.2.2/24 dev $rp2
+	ip address add 192.0.3.2/24 dev v1
+
+	ip route add 10.0.0.1/32 vrf vrf-spine nexthop via 192.0.2.1
+	ip route add 10.0.0.2/32 vrf vrf-spine nexthop via 192.0.3.1
+}
+
+spine_destroy()
+{
+	ip route del 10.0.0.2/32 vrf vrf-spine nexthop via 192.0.3.1
+	ip route del 10.0.0.1/32 vrf vrf-spine nexthop via 192.0.2.1
+
+	ip address del 192.0.3.2/24 dev v1
+	ip address del 192.0.2.2/24 dev $rp2
+
+	ip link set dev v1 down
+	ip link set dev $rp2 down
+	vrf_destroy "vrf-spine"
+}
+
+ns_h1_create()
+{
+	hx_create "vrf-h1" w2 10.1.1.102 10.1.1.1
+}
+export -f ns_h1_create
+
+ns_h2_create()
+{
+	hx_create "vrf-h2" w4 10.1.2.102 10.1.2.1
+}
+export -f ns_h2_create
+
+ns_switch_create()
+{
+	ip link add name br1 type bridge vlan_filtering 1 vlan_default_pvid 0 \
+		mcast_snooping 0
+	ip link set dev br1 up
+
+	ip link set dev v2 up
+	ip address add dev v2 192.0.3.1/24
+	ip route add 10.0.0.1/32 nexthop via 192.0.3.2
+
+	ip link add name vx10 type vxlan id 1000		\
+		local 10.0.0.2 remote 10.0.0.1 dstport 4789	\
+		nolearning noudpcsum tos inherit ttl 100
+	ip link set dev vx10 up
+
+	ip link set dev vx10 master br1
+	bridge vlan add vid 10 dev vx10 pvid untagged
+
+	ip link add name vx20 type vxlan id 2000		\
+		local 10.0.0.2 remote 10.0.0.1 dstport 4789	\
+		nolearning noudpcsum tos inherit ttl 100
+	ip link set dev vx20 up
+
+	ip link set dev vx20 master br1
+	bridge vlan add vid 20 dev vx20 pvid untagged
+
+	ip link set dev w1 master br1
+	ip link set dev w1 up
+	bridge vlan add vid 10 dev w1 pvid untagged
+
+	ip link set dev w3 master br1
+	ip link set dev w3 up
+	bridge vlan add vid 20 dev w3 pvid untagged
+
+	ip address add 10.0.0.2/32 dev lo
+
+	# Create SVIs
+	vrf_create "vrf-green"
+	ip link set dev vrf-green up
+
+	ip link add link br1 name vlan10 up master vrf-green type vlan id 10
+	ip address add 10.1.1.12/24 dev vlan10
+	ip link add link vlan10 name vlan10-v up master vrf-green \
+		address 00:00:5e:00:01:01 type macvlan mode private
+	ip address add 10.1.1.1/24 dev vlan10-v
+
+	ip link add link br1 name vlan20 up master vrf-green type vlan id 20
+	ip address add 10.1.2.12/24 dev vlan20
+	ip link add link vlan20 name vlan20-v up master vrf-green \
+		address 00:00:5e:00:01:01 type macvlan mode private
+	ip address add 10.1.2.1/24 dev vlan20-v
+
+	bridge vlan add vid 10 dev br1 self
+	bridge vlan add vid 20 dev br1 self
+
+	bridge fdb add 00:00:5e:00:01:01 dev br1 self local vlan 10
+	bridge fdb add 00:00:5e:00:01:01 dev br1 self local vlan 20
+
+	sysctl_set net.ipv4.conf.all.rp_filter 0
+	sysctl_set net.ipv4.conf.vlan10-v.rp_filter 0
+	sysctl_set net.ipv4.conf.vlan20-v.rp_filter 0
+}
+export -f ns_switch_create
+
+ns_init()
+{
+	ip link add name w1 type veth peer name w2
+	ip link add name w3 type veth peer name w4
+
+	ip link set dev lo up
+
+	ns_h1_create
+	ns_h2_create
+	ns_switch_create
+}
+export -f ns_init
+
+ns1_create()
+{
+	ip netns add ns1
+	ip link set dev v2 netns ns1
+	in_ns ns1 ns_init
+}
+
+ns1_destroy()
+{
+	ip netns exec ns1 ip link set dev v2 netns 1
+	ip netns del ns1
+}
+
+macs_populate()
+{
+	local mac1=$1; shift
+	local mac2=$1; shift
+	local ip1=$1; shift
+	local ip2=$1; shift
+	local dst=$1; shift
+
+	bridge fdb add $mac1 dev vx10 self master extern_learn static \
+		dst $dst vlan 10
+	bridge fdb add $mac2 dev vx20 self master extern_learn static \
+		dst $dst vlan 20
+
+	ip neigh add $ip1 lladdr $mac1 nud noarp dev vlan10 \
+		extern_learn
+	ip neigh add $ip2 lladdr $mac2 nud noarp dev vlan20 \
+		extern_learn
+}
+export -f macs_populate
+
+macs_initialize()
+{
+	local h1_ns_mac=$(in_ns ns1 mac_get w2)
+	local h2_ns_mac=$(in_ns ns1 mac_get w4)
+	local h1_mac=$(mac_get $h1)
+	local h2_mac=$(mac_get $h2)
+
+	macs_populate $h1_ns_mac $h2_ns_mac 10.1.1.102 10.1.2.102 10.0.0.2
+	in_ns ns1 macs_populate $h1_mac $h2_mac 10.1.1.101 10.1.2.101 10.0.0.1
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	rp1=${NETIFS[p5]}
+	rp2=${NETIFS[p6]}
+
+	vrf_prepare
+	forwarding_enable
+
+	h1_create
+	h2_create
+	switch_create
+
+	ip link add name v1 type veth peer name v2
+	spine_create
+	ns1_create
+
+	macs_initialize
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	ns1_destroy
+	spine_destroy
+	ip link del dev v1
+
+	switch_destroy
+	h2_destroy
+	h1_destroy
+
+	forwarding_restore
+	vrf_cleanup
+}
+
+ping_ipv4()
+{
+	ping_test $h1 10.1.2.101 ": local->local vid 10->vid 20"
+	ping_test $h1 10.1.1.102 ": local->remote vid 10->vid 10"
+	ping_test $h2 10.1.2.102 ": local->remote vid 20->vid 20"
+	ping_test $h1 10.1.2.102 ": local->remote vid 10->vid 20"
+	ping_test $h2 10.1.1.102 ": local->remote vid 20->vid 10"
+}
+
+arp_decap()
+{
+	# Repeat the ping tests, but without populating the neighbours. This
+	# makes sure we correctly decapsulate ARP packets
+	log_info "deleting neighbours from vlan interfaces"
+
+	ip neigh del 10.1.1.102 dev vlan10
+	ip neigh del 10.1.2.102 dev vlan20
+
+	ping_ipv4
+
+	ip neigh replace 10.1.1.102 lladdr $(in_ns ns1 mac_get w2) nud noarp \
+		dev vlan10 extern_learn
+	ip neigh replace 10.1.2.102 lladdr $(in_ns ns1 mac_get w4) nud noarp \
+		dev vlan20 extern_learn
+}
+
+arp_suppression_compare()
+{
+	local expect=$1; shift
+	local actual=$(in_ns ns1 tc_rule_stats_get vx10 1 ingress)
+
+	(( expect == actual ))
+	check_err $? "expected $expect arps got $actual"
+}
+
+arp_suppression()
+{
+	ip link set dev vx10 type bridge_slave neigh_suppress on
+
+	in_ns ns1 tc qdisc add dev vx10 clsact
+	in_ns ns1 tc filter add dev vx10 ingress proto arp pref 1 handle 101 \
+		flower dst_mac ff:ff:ff:ff:ff:ff arp_tip 10.1.1.102 arp_op \
+		request action pass
+
+	# The neighbour is configured on the SVI and ARP suppression is on, so
+	# the ARP request should be suppressed
+	RET=0
+
+	$ARPING -I $h1 -fqb -c 1 -w 1 10.1.1.102
+	check_err $? "arping failed"
+
+	arp_suppression_compare 0
+
+	log_test "neigh_suppress: on / neigh exists: yes"
+
+	# Delete the neighbour from the SVI. A single ARP request should be
+	# received by the remote VTEP
+	RET=0
+
+	ip neigh del 10.1.1.102 dev vlan10
+
+	$ARPING -I $h1 -fqb -c 1 -w 1 10.1.1.102
+	check_err $? "arping failed"
+
+	arp_suppression_compare 1
+
+	log_test "neigh_suppress: on / neigh exists: no"
+
+	# Turn off ARP suppression and make sure ARP is not suppressed,
+	# regardless of neighbour existence on the SVI
+	RET=0
+
+	ip neigh del 10.1.1.102 dev vlan10 &> /dev/null
+	ip link set dev vx10 type bridge_slave neigh_suppress off
+
+	$ARPING -I $h1 -fqb -c 1 -w 1 10.1.1.102
+	check_err $? "arping failed"
+
+	arp_suppression_compare 2
+
+	log_test "neigh_suppress: off / neigh exists: no"
+
+	RET=0
+
+	ip neigh add 10.1.1.102 lladdr $(in_ns ns1 mac_get w2) nud noarp \
+		dev vlan10 extern_learn
+
+	$ARPING -I $h1 -fqb -c 1 -w 1 10.1.1.102
+	check_err $? "arping failed"
+
+	arp_suppression_compare 3
+
+	log_test "neigh_suppress: off / neigh exists: yes"
+
+	in_ns ns1 tc qdisc del dev vx10 clsact
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS