Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 254 insertions, 0 deletions

diff --git a/tools/testing/selftests/net/ndisc_unsolicited_na_test.sh b/tools/testing/selftests/net/ndisc_unsolicited_na_test.sh
new file mode 100755
index 000000000..86e621b7b
--- /dev/null
+++ b/tools/testing/selftests/net/ndisc_unsolicited_na_test.sh
@@ -0,0 +1,254 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# This test is for the accept_untracked_na feature to
+# enable RFC9131 behaviour. The following is the test-matrix.
+# drop   accept  fwding                   behaviour
+# ----   ------  ------  ----------------------------------------------
+#    1        X       X  Don't update NC
+#    0        0       X  Don't update NC
+#    0        1       0  Don't update NC
+#    0        1       1  Add a STALE NC entry
+
+ret=0
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+
+PAUSE_ON_FAIL=no
+PAUSE=no
+
+HOST_NS="ns-host"
+ROUTER_NS="ns-router"
+
+HOST_INTF="veth-host"
+ROUTER_INTF="veth-router"
+
+ROUTER_ADDR="2000:20::1"
+HOST_ADDR="2000:20::2"
+SUBNET_WIDTH=64
+ROUTER_ADDR_WITH_MASK="${ROUTER_ADDR}/${SUBNET_WIDTH}"
+HOST_ADDR_WITH_MASK="${HOST_ADDR}/${SUBNET_WIDTH}"
+
+IP_HOST="ip -6 -netns ${HOST_NS}"
+IP_HOST_EXEC="ip netns exec ${HOST_NS}"
+IP_ROUTER="ip -6 -netns ${ROUTER_NS}"
+IP_ROUTER_EXEC="ip netns exec ${ROUTER_NS}"
+
+tcpdump_stdout=
+tcpdump_stderr=
+
+log_test()
+{
+	local rc=$1
+	local expected=$2
+	local msg="$3"
+
+	if [ ${rc} -eq ${expected} ]; then
+		printf "    TEST: %-60s  [ OK ]\n" "${msg}"
+		nsuccess=$((nsuccess+1))
+	else
+		ret=1
+		nfail=$((nfail+1))
+		printf "    TEST: %-60s  [FAIL]\n" "${msg}"
+		if [ "${PAUSE_ON_FAIL}" = "yes" ]; then
+		echo
+			echo "hit enter to continue, 'q' to quit"
+			read a
+			[ "$a" = "q" ] && exit 1
+		fi
+	fi
+
+	if [ "${PAUSE}" = "yes" ]; then
+		echo
+		echo "hit enter to continue, 'q' to quit"
+		read a
+		[ "$a" = "q" ] && exit 1
+	fi
+}
+
+setup()
+{
+	set -e
+
+	local drop_unsolicited_na=$1
+	local accept_untracked_na=$2
+	local forwarding=$3
+
+	# Setup two namespaces and a veth tunnel across them.
+	# On end of the tunnel is a router and the other end is a host.
+	ip netns add ${HOST_NS}
+	ip netns add ${ROUTER_NS}
+	${IP_ROUTER} link add ${ROUTER_INTF} type veth \
+                peer name ${HOST_INTF} netns ${HOST_NS}
+
+	# Enable IPv6 on both router and host, and configure static addresses.
+	# The router here is the DUT
+	# Setup router configuration as specified by the arguments.
+	# forwarding=0 case is to check that a non-router
+	# doesn't add neighbour entries.
+        ROUTER_CONF=net.ipv6.conf.${ROUTER_INTF}
+	${IP_ROUTER_EXEC} sysctl -qw \
+                ${ROUTER_CONF}.forwarding=${forwarding}
+	${IP_ROUTER_EXEC} sysctl -qw \
+                ${ROUTER_CONF}.drop_unsolicited_na=${drop_unsolicited_na}
+	${IP_ROUTER_EXEC} sysctl -qw \
+                ${ROUTER_CONF}.accept_untracked_na=${accept_untracked_na}
+	${IP_ROUTER_EXEC} sysctl -qw ${ROUTER_CONF}.disable_ipv6=0
+	${IP_ROUTER} addr add ${ROUTER_ADDR_WITH_MASK} dev ${ROUTER_INTF}
+
+	# Turn on ndisc_notify on host interface so that
+	# the host sends unsolicited NAs.
+	HOST_CONF=net.ipv6.conf.${HOST_INTF}
+	${IP_HOST_EXEC} sysctl -qw ${HOST_CONF}.ndisc_notify=1
+	${IP_HOST_EXEC} sysctl -qw ${HOST_CONF}.disable_ipv6=0
+	${IP_HOST} addr add ${HOST_ADDR_WITH_MASK} dev ${HOST_INTF}
+
+	set +e
+}
+
+start_tcpdump() {
+	set -e
+	tcpdump_stdout=`mktemp`
+	tcpdump_stderr=`mktemp`
+	${IP_ROUTER_EXEC} timeout 15s \
+                tcpdump --immediate-mode -tpni ${ROUTER_INTF} -c 1 \
+                "icmp6 && icmp6[0] == 136 && src ${HOST_ADDR}" \
+                > ${tcpdump_stdout} 2> /dev/null
+	set +e
+}
+
+cleanup_tcpdump()
+{
+	set -e
+	[[ ! -z  ${tcpdump_stdout} ]] && rm -f ${tcpdump_stdout}
+	[[ ! -z  ${tcpdump_stderr} ]] && rm -f ${tcpdump_stderr}
+	tcpdump_stdout=
+	tcpdump_stderr=
+	set +e
+}
+
+cleanup()
+{
+	cleanup_tcpdump
+	ip netns del ${HOST_NS}
+	ip netns del ${ROUTER_NS}
+}
+
+link_up() {
+	set -e
+	${IP_ROUTER} link set dev ${ROUTER_INTF} up
+	${IP_HOST} link set dev ${HOST_INTF} up
+	set +e
+}
+
+verify_ndisc() {
+	local drop_unsolicited_na=$1
+	local accept_untracked_na=$2
+	local forwarding=$3
+
+	neigh_show_output=$(${IP_ROUTER} neigh show \
+                to ${HOST_ADDR} dev ${ROUTER_INTF} nud stale)
+	if [ ${drop_unsolicited_na} -eq 0 ] && \
+			[ ${accept_untracked_na} -eq 1 ] && \
+			[ ${forwarding} -eq 1 ]; then
+		# Neighbour entry expected to be present for 011 case
+		[[ ${neigh_show_output} ]]
+	else
+		# Neighbour entry expected to be absent for all other cases
+		[[ -z ${neigh_show_output} ]]
+	fi
+}
+
+test_unsolicited_na_common()
+{
+	# Setup the test bed, but keep links down
+	setup $1 $2 $3
+
+	# Bring the link up, wait for the NA,
+	# and add a delay to ensure neighbour processing is done.
+	link_up
+	start_tcpdump
+
+	# Verify the neighbour table
+	verify_ndisc $1 $2 $3
+
+}
+
+test_unsolicited_na_combination() {
+	test_unsolicited_na_common $1 $2 $3
+	test_msg=("test_unsolicited_na: "
+		"drop_unsolicited_na=$1 "
+		"accept_untracked_na=$2 "
+		"forwarding=$3")
+	log_test $? 0 "${test_msg[*]}"
+	cleanup
+}
+
+test_unsolicited_na_combinations() {
+	# Args: drop_unsolicited_na accept_untracked_na forwarding
+
+	# Expect entry
+	test_unsolicited_na_combination 0 1 1
+
+	# Expect no entry
+	test_unsolicited_na_combination 0 0 0
+	test_unsolicited_na_combination 0 0 1
+	test_unsolicited_na_combination 0 1 0
+	test_unsolicited_na_combination 1 0 0
+	test_unsolicited_na_combination 1 0 1
+	test_unsolicited_na_combination 1 1 0
+	test_unsolicited_na_combination 1 1 1
+}
+
+###############################################################################
+# usage
+
+usage()
+{
+	cat <<EOF
+usage: ${0##*/} OPTS
+        -p          Pause on fail
+        -P          Pause after each test before cleanup
+EOF
+}
+
+###############################################################################
+# main
+
+while getopts :pPh o
+do
+	case $o in
+		p) PAUSE_ON_FAIL=yes;;
+		P) PAUSE=yes;;
+		h) usage; exit 0;;
+		*) usage; exit 1;;
+	esac
+done
+
+# make sure we don't pause twice
+[ "${PAUSE}" = "yes" ] && PAUSE_ON_FAIL=no
+
+if [ "$(id -u)" -ne 0 ];then
+	echo "SKIP: Need root privileges"
+	exit $ksft_skip;
+fi
+
+if [ ! -x "$(command -v ip)" ]; then
+	echo "SKIP: Could not run test without ip tool"
+	exit $ksft_skip
+fi
+
+if [ ! -x "$(command -v tcpdump)" ]; then
+	echo "SKIP: Could not run test without tcpdump tool"
+	exit $ksft_skip
+fi
+
+# start clean
+cleanup &> /dev/null
+
+test_unsolicited_na_combinations
+
+printf "\nTests passed: %3d\n" ${nsuccess}
+printf "Tests failed: %3d\n"   ${nfail}
+
+exit $ret