Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

5 files changed, 226 insertions, 0 deletions

diff --git a/tools/testing/selftests/powerpc/switch_endian/.gitignore b/tools/testing/selftests/powerpc/switch_endian/.gitignore
new file mode 100644
index 000000000..30e962cf8
--- /dev/null
+++ b/tools/testing/selftests/powerpc/switch_endian/.gitignore
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
+switch_endian_test
+check-reversed.S
diff --git a/tools/testing/selftests/powerpc/switch_endian/Makefile b/tools/testing/selftests/powerpc/switch_endian/Makefile
new file mode 100644
index 000000000..bdc081afe
--- /dev/null
+++ b/tools/testing/selftests/powerpc/switch_endian/Makefile
@@ -0,0 +1,18 @@
+# SPDX-License-Identifier: GPL-2.0
+TEST_GEN_PROGS := switch_endian_test
+
+ASFLAGS += -O2 -Wall -g -nostdlib -m64
+
+EXTRA_CLEAN = $(OUTPUT)/*.o $(OUTPUT)/check-reversed.S
+
+top_srcdir = ../../../../..
+include ../../lib.mk
+
+$(OUTPUT)/switch_endian_test: ASFLAGS += -I $(OUTPUT)
+$(OUTPUT)/switch_endian_test: $(OUTPUT)/check-reversed.S
+
+$(OUTPUT)/check-reversed.o: $(OUTPUT)/check.o
+	$(CROSS_COMPILE)objcopy -j .text --reverse-bytes=4 -O binary $< $@
+
+$(OUTPUT)/check-reversed.S: $(OUTPUT)/check-reversed.o
+	hexdump -v -e '/1 ".byte 0x%02X\n"' $< > $@
diff --git a/tools/testing/selftests/powerpc/switch_endian/check.S b/tools/testing/selftests/powerpc/switch_endian/check.S
new file mode 100644
index 000000000..927a5c675
--- /dev/null
+++ b/tools/testing/selftests/powerpc/switch_endian/check.S
@@ -0,0 +1,101 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#include "common.h"
+
+/*
+ * Checks that registers contain what we expect, ie. they were not clobbered by
+ * the syscall.
+ *
+ * r15: pattern to check registers against.
+ *
+ * At the end r3 == 0 if everything's OK.
+ */
+	nop			# guaranteed to be illegal in reverse-endian
+	mr	r9,r15
+	cmpd    r9,r3		# check r3
+	bne     1f
+	addi    r9,r15,4	# check r4
+	cmpd    r9,r4
+	bne     1f
+	lis     r9,0x00FF	# check CR
+	ori     r9,r9,0xF000
+	mfcr    r10
+	and     r10,r10,r9
+	cmpw    r9,r10
+	addi    r9,r15,34
+	bne     1f
+	addi    r9,r15,32	# check LR
+	mflr    r10
+	cmpd    r9,r10
+	bne     1f
+	addi    r9,r15,5	# check r5
+	cmpd    r9,r5
+	bne     1f
+	addi    r9,r15,6	# check r6
+	cmpd    r9,r6
+	bne     1f
+	addi    r9,r15,7	# check r7
+	cmpd    r9,r7
+	bne     1f
+	addi    r9,r15,8	# check r8
+	cmpd    r9,r8
+	bne     1f
+	addi    r9,r15,13	# check r13
+	cmpd    r9,r13
+	bne     1f
+	addi    r9,r15,14	# check r14
+	cmpd    r9,r14
+	bne     1f
+	addi    r9,r15,16	# check r16
+	cmpd    r9,r16
+	bne     1f
+	addi    r9,r15,17	# check r17
+	cmpd    r9,r17
+	bne     1f
+	addi    r9,r15,18	# check r18
+	cmpd    r9,r18
+	bne     1f
+	addi    r9,r15,19	# check r19
+	cmpd    r9,r19
+	bne     1f
+	addi    r9,r15,20	# check r20
+	cmpd    r9,r20
+	bne     1f
+	addi    r9,r15,21	# check r21
+	cmpd    r9,r21
+	bne     1f
+	addi    r9,r15,22	# check r22
+	cmpd    r9,r22
+	bne     1f
+	addi    r9,r15,23	# check r23
+	cmpd    r9,r23
+	bne     1f
+	addi    r9,r15,24	# check r24
+	cmpd    r9,r24
+	bne     1f
+	addi    r9,r15,25	# check r25
+	cmpd    r9,r25
+	bne     1f
+	addi    r9,r15,26	# check r26
+	cmpd    r9,r26
+	bne     1f
+	addi    r9,r15,27	# check r27
+	cmpd    r9,r27
+	bne     1f
+	addi    r9,r15,28	# check r28
+	cmpd    r9,r28
+	bne     1f
+	addi    r9,r15,29	# check r29
+	cmpd    r9,r29
+	bne     1f
+	addi    r9,r15,30	# check r30
+	cmpd    r9,r30
+	bne     1f
+	addi    r9,r15,31	# check r31
+	cmpd    r9,r31
+	bne     1f
+	b	2f
+1:	mr	r3, r9
+	li	r0, __NR_exit
+	sc
+2:	li	r0, __NR_switch_endian
+	nop
diff --git a/tools/testing/selftests/powerpc/switch_endian/common.h b/tools/testing/selftests/powerpc/switch_endian/common.h
new file mode 100644
index 000000000..1434cbc2a
--- /dev/null
+++ b/tools/testing/selftests/powerpc/switch_endian/common.h
@@ -0,0 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#include <ppc-asm.h>
+#include <asm/unistd.h>
+
+#ifndef __NR_switch_endian
+#define __NR_switch_endian 363
+#endif
diff --git a/tools/testing/selftests/powerpc/switch_endian/switch_endian_test.S b/tools/testing/selftests/powerpc/switch_endian/switch_endian_test.S
new file mode 100644
index 000000000..7887f78cf
--- /dev/null
+++ b/tools/testing/selftests/powerpc/switch_endian/switch_endian_test.S
@@ -0,0 +1,97 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#include "common.h"
+
+	.data
+	.balign 8
+success_message:
+	.ascii "success: switch_endian_test\n\0"
+
+	.balign 8
+failure_message:
+	.ascii "failure: switch_endian_test\n\0"
+
+	.section ".toc"
+	.balign 8
+pattern:
+	.8byte 0x5555AAAA5555AAAA
+
+	.text
+FUNC_START(_start)
+	/* Load the pattern */
+	ld	r15, pattern@TOC(%r2)
+
+	/* Setup CR, only CR2-CR4 are maintained */
+	lis	r3, 0x00FF
+	ori	r3, r3, 0xF000
+	mtcr	r3
+
+	/* Load the pattern slightly modified into the registers */
+	mr	r3, r15
+	addi	r4, r15, 4
+
+	addi	r5, r15, 32
+	mtlr	r5
+
+	addi	r5, r15, 5
+	addi	r6, r15, 6
+	addi	r7, r15, 7
+	addi	r8, r15, 8
+
+	/* r9 - r12 are clobbered */
+
+	addi	r13, r15, 13
+	addi	r14, r15, 14
+
+	/* Skip r15 we're using it */
+
+	addi	r16, r15, 16
+	addi	r17, r15, 17
+	addi	r18, r15, 18
+	addi	r19, r15, 19
+	addi	r20, r15, 20
+	addi	r21, r15, 21
+	addi	r22, r15, 22
+	addi	r23, r15, 23
+	addi	r24, r15, 24
+	addi	r25, r15, 25
+	addi	r26, r15, 26
+	addi	r27, r15, 27
+	addi	r28, r15, 28
+	addi	r29, r15, 29
+	addi	r30, r15, 30
+	addi	r31, r15, 31
+
+	/*
+	 * Call the syscall to switch endian.
+	 * It clobbers r9-r12, XER, CTR and CR0-1,5-7.
+	 */
+	li r0, __NR_switch_endian
+	sc
+
+	tdi   0, 0, 0x48	// b +8 if the endian was switched
+	b     .Lfail	  	// exit if endian didn't switch
+
+#include "check-reversed.S"
+
+	/* Flip back, r0 already has the switch syscall number */
+	.long	0x02000044	/* sc */
+
+#include "check.S"
+
+	ld	r4, success_message@got(%r2)
+	li	r5, 28	// strlen(success_message)
+	li	r14, 0	// exit status
+.Lout:
+	li	r0, __NR_write
+	li	r3, 1	/* stdout */
+	sc
+	li      r0, __NR_exit
+	mr	r3, r14
+	sc
+	b       .
+
+.Lfail:
+	ld	r4, failure_message@got(%r2)
+	li	r5, 28	// strlen(failure_message)
+	li	r14, 1
+	b	.Lout