Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 330 insertions, 0 deletions

diff --git a/tools/testing/selftests/timers/valid-adjtimex.c b/tools/testing/selftests/timers/valid-adjtimex.c
new file mode 100644
index 000000000..48b9a8032
--- /dev/null
+++ b/tools/testing/selftests/timers/valid-adjtimex.c
@@ -0,0 +1,330 @@
+/* valid adjtimex test
+ *              by: John Stultz <john.stultz@linaro.org>
+ *              (C) Copyright Linaro 2015
+ *              Licensed under the GPLv2
+ *
+ *  This test validates adjtimex interface with valid
+ *  and invalid test data.
+ *
+ *  Usage: valid-adjtimex
+ *
+ *  To build:
+ *	$ gcc valid-adjtimex.c -o valid-adjtimex -lrt
+ *
+ *   This program is free software: you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation, either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ */
+
+
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <time.h>
+#include <sys/time.h>
+#include <sys/timex.h>
+#include <string.h>
+#include <signal.h>
+#include <unistd.h>
+#include "../kselftest.h"
+
+#define NSEC_PER_SEC 1000000000LL
+#define USEC_PER_SEC 1000000LL
+
+#define ADJ_SETOFFSET 0x0100
+
+#include <sys/syscall.h>
+int clock_adjtime(clockid_t id, struct timex *tx)
+{
+	return syscall(__NR_clock_adjtime, id, tx);
+}
+
+
+/* clear NTP time_status & time_state */
+int clear_time_state(void)
+{
+	struct timex tx;
+	int ret;
+
+	tx.modes = ADJ_STATUS;
+	tx.status = 0;
+	ret = adjtimex(&tx);
+	return ret;
+}
+
+#define NUM_FREQ_VALID 32
+#define NUM_FREQ_OUTOFRANGE 4
+#define NUM_FREQ_INVALID 2
+
+long valid_freq[NUM_FREQ_VALID] = {
+	-499<<16,
+	-450<<16,
+	-400<<16,
+	-350<<16,
+	-300<<16,
+	-250<<16,
+	-200<<16,
+	-150<<16,
+	-100<<16,
+	-75<<16,
+	-50<<16,
+	-25<<16,
+	-10<<16,
+	-5<<16,
+	-1<<16,
+	-1000,
+	1<<16,
+	5<<16,
+	10<<16,
+	25<<16,
+	50<<16,
+	75<<16,
+	100<<16,
+	150<<16,
+	200<<16,
+	250<<16,
+	300<<16,
+	350<<16,
+	400<<16,
+	450<<16,
+	499<<16,
+};
+
+long outofrange_freq[NUM_FREQ_OUTOFRANGE] = {
+	-1000<<16,
+	-550<<16,
+	550<<16,
+	1000<<16,
+};
+
+#define LONG_MAX (~0UL>>1)
+#define LONG_MIN (-LONG_MAX - 1)
+
+long invalid_freq[NUM_FREQ_INVALID] = {
+	LONG_MAX,
+	LONG_MIN,
+};
+
+int validate_freq(void)
+{
+	struct timex tx;
+	int ret, pass = 0;
+	int i;
+
+	clear_time_state();
+
+	memset(&tx, 0, sizeof(struct timex));
+	/* Set the leap second insert flag */
+
+	printf("Testing ADJ_FREQ... ");
+	fflush(stdout);
+	for (i = 0; i < NUM_FREQ_VALID; i++) {
+		tx.modes = ADJ_FREQUENCY;
+		tx.freq = valid_freq[i];
+
+		ret = adjtimex(&tx);
+		if (ret < 0) {
+			printf("[FAIL]\n");
+			printf("Error: adjtimex(ADJ_FREQ, %ld - %ld ppm\n",
+				valid_freq[i], valid_freq[i]>>16);
+			pass = -1;
+			goto out;
+		}
+		tx.modes = 0;
+		ret = adjtimex(&tx);
+		if (tx.freq != valid_freq[i]) {
+			printf("Warning: freq value %ld not what we set it (%ld)!\n",
+					tx.freq, valid_freq[i]);
+		}
+	}
+	for (i = 0; i < NUM_FREQ_OUTOFRANGE; i++) {
+		tx.modes = ADJ_FREQUENCY;
+		tx.freq = outofrange_freq[i];
+
+		ret = adjtimex(&tx);
+		if (ret < 0) {
+			printf("[FAIL]\n");
+			printf("Error: adjtimex(ADJ_FREQ, %ld - %ld ppm\n",
+				outofrange_freq[i], outofrange_freq[i]>>16);
+			pass = -1;
+			goto out;
+		}
+		tx.modes = 0;
+		ret = adjtimex(&tx);
+		if (tx.freq == outofrange_freq[i]) {
+			printf("[FAIL]\n");
+			printf("ERROR: out of range value %ld actually set!\n",
+					tx.freq);
+			pass = -1;
+			goto out;
+		}
+	}
+
+
+	if (sizeof(long) == 8) { /* this case only applies to 64bit systems */
+		for (i = 0; i < NUM_FREQ_INVALID; i++) {
+			tx.modes = ADJ_FREQUENCY;
+			tx.freq = invalid_freq[i];
+			ret = adjtimex(&tx);
+			if (ret >= 0) {
+				printf("[FAIL]\n");
+				printf("Error: No failure on invalid ADJ_FREQUENCY %ld\n",
+					invalid_freq[i]);
+				pass = -1;
+				goto out;
+			}
+		}
+	}
+
+	printf("[OK]\n");
+out:
+	/* reset freq to zero */
+	tx.modes = ADJ_FREQUENCY;
+	tx.freq = 0;
+	ret = adjtimex(&tx);
+
+	return pass;
+}
+
+
+int set_offset(long long offset, int use_nano)
+{
+	struct timex tmx = {};
+	int ret;
+
+	tmx.modes = ADJ_SETOFFSET;
+	if (use_nano) {
+		tmx.modes |= ADJ_NANO;
+
+		tmx.time.tv_sec = offset / NSEC_PER_SEC;
+		tmx.time.tv_usec = offset % NSEC_PER_SEC;
+
+		if (offset < 0 && tmx.time.tv_usec) {
+			tmx.time.tv_sec -= 1;
+			tmx.time.tv_usec += NSEC_PER_SEC;
+		}
+	} else {
+		tmx.time.tv_sec = offset / USEC_PER_SEC;
+		tmx.time.tv_usec = offset % USEC_PER_SEC;
+
+		if (offset < 0 && tmx.time.tv_usec) {
+			tmx.time.tv_sec -= 1;
+			tmx.time.tv_usec += USEC_PER_SEC;
+		}
+	}
+
+	ret = clock_adjtime(CLOCK_REALTIME, &tmx);
+	if (ret < 0) {
+		printf("(sec: %ld  usec: %ld) ", tmx.time.tv_sec, tmx.time.tv_usec);
+		printf("[FAIL]\n");
+		return -1;
+	}
+	return 0;
+}
+
+int set_bad_offset(long sec, long usec, int use_nano)
+{
+	struct timex tmx = {};
+	int ret;
+
+	tmx.modes = ADJ_SETOFFSET;
+	if (use_nano)
+		tmx.modes |= ADJ_NANO;
+
+	tmx.time.tv_sec = sec;
+	tmx.time.tv_usec = usec;
+	ret = clock_adjtime(CLOCK_REALTIME, &tmx);
+	if (ret >= 0) {
+		printf("Invalid (sec: %ld  usec: %ld) did not fail! ", tmx.time.tv_sec, tmx.time.tv_usec);
+		printf("[FAIL]\n");
+		return -1;
+	}
+	return 0;
+}
+
+int validate_set_offset(void)
+{
+	printf("Testing ADJ_SETOFFSET... ");
+	fflush(stdout);
+
+	/* Test valid values */
+	if (set_offset(NSEC_PER_SEC - 1, 1))
+		return -1;
+
+	if (set_offset(-NSEC_PER_SEC + 1, 1))
+		return -1;
+
+	if (set_offset(-NSEC_PER_SEC - 1, 1))
+		return -1;
+
+	if (set_offset(5 * NSEC_PER_SEC, 1))
+		return -1;
+
+	if (set_offset(-5 * NSEC_PER_SEC, 1))
+		return -1;
+
+	if (set_offset(5 * NSEC_PER_SEC + NSEC_PER_SEC / 2, 1))
+		return -1;
+
+	if (set_offset(-5 * NSEC_PER_SEC - NSEC_PER_SEC / 2, 1))
+		return -1;
+
+	if (set_offset(USEC_PER_SEC - 1, 0))
+		return -1;
+
+	if (set_offset(-USEC_PER_SEC + 1, 0))
+		return -1;
+
+	if (set_offset(-USEC_PER_SEC - 1, 0))
+		return -1;
+
+	if (set_offset(5 * USEC_PER_SEC, 0))
+		return -1;
+
+	if (set_offset(-5 * USEC_PER_SEC, 0))
+		return -1;
+
+	if (set_offset(5 * USEC_PER_SEC + USEC_PER_SEC / 2, 0))
+		return -1;
+
+	if (set_offset(-5 * USEC_PER_SEC - USEC_PER_SEC / 2, 0))
+		return -1;
+
+	/* Test invalid values */
+	if (set_bad_offset(0, -1, 1))
+		return -1;
+	if (set_bad_offset(0, -1, 0))
+		return -1;
+	if (set_bad_offset(0, 2 * NSEC_PER_SEC, 1))
+		return -1;
+	if (set_bad_offset(0, 2 * USEC_PER_SEC, 0))
+		return -1;
+	if (set_bad_offset(0, NSEC_PER_SEC, 1))
+		return -1;
+	if (set_bad_offset(0, USEC_PER_SEC, 0))
+		return -1;
+	if (set_bad_offset(0, -NSEC_PER_SEC, 1))
+		return -1;
+	if (set_bad_offset(0, -USEC_PER_SEC, 0))
+		return -1;
+
+	printf("[OK]\n");
+	return 0;
+}
+
+int main(int argc, char **argv)
+{
+	if (validate_freq())
+		return ksft_exit_fail();
+
+	if (validate_set_offset())
+		return ksft_exit_fail();
+
+	return ksft_exit_pass();
+}